update to a vender profile
This commit is contained in:
BIN
FReenen.zip
Normal file
BIN
FReenen.zip
Normal file
Binary file not shown.
513
FReenen/0.2.0.ini
Normal file
513
FReenen/0.2.0.ini
Normal file
@@ -0,0 +1,513 @@
|
|||||||
|
[vendor]
|
||||||
|
# Vendor name will be shown by the Config Wizard.
|
||||||
|
name = FReenen
|
||||||
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||||
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||||
|
config_version = 0.1.0
|
||||||
|
config_update_url = https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/FReenen.ini
|
||||||
|
|
||||||
|
########################################################################
|
||||||
|
### Print Settings #####################################################
|
||||||
|
########################################################################
|
||||||
|
|
||||||
|
[print:*pringles*]
|
||||||
|
# Layers and perimeters
|
||||||
|
|
||||||
|
## Layers and perimeters - Layer height
|
||||||
|
layer_height = 0.20
|
||||||
|
first_layer_height = 0.2
|
||||||
|
|
||||||
|
## Layers and perimeters - Vertical shells
|
||||||
|
perimeters = 2
|
||||||
|
spiral_vase = 0
|
||||||
|
|
||||||
|
## Layers and perimeters - Horizontal shells
|
||||||
|
top_solid_layers = 4
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
top_solid_min_thickness = 0
|
||||||
|
bottom_solid_min_thickness = 0
|
||||||
|
|
||||||
|
## Layers and perimeters - Quality (slower slicing)
|
||||||
|
extra_perimeters = 0
|
||||||
|
extra_perimeters_on_overhangs = 0
|
||||||
|
avoid_crossing_curled_overhangs = 1
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
avoid_crossing_perimeters_max_detour = 0
|
||||||
|
thin_walls = 0
|
||||||
|
thick_bridges = 1
|
||||||
|
overhangs = 1
|
||||||
|
|
||||||
|
## Layers and perimeters - Advanced
|
||||||
|
seam_position = nearest
|
||||||
|
staggered_inner_seams = 0
|
||||||
|
external_perimeters_first = 0
|
||||||
|
gap_fill_enabled = 1
|
||||||
|
perimeter_generator = arachne
|
||||||
|
|
||||||
|
## Layers and perimeters - Fuzzy skin
|
||||||
|
fuzzy_skin = none
|
||||||
|
fuzzy_skin_point_dist = 0.8
|
||||||
|
fuzzy_skin_thickness = 0.3
|
||||||
|
|
||||||
|
## Layers and perimeters - Only one perimeter
|
||||||
|
top_one_perimeter_type = none
|
||||||
|
only_one_perimeter_first_layer = 0
|
||||||
|
|
||||||
|
# Infill
|
||||||
|
|
||||||
|
## Infill - Infill
|
||||||
|
fill_density = 15%
|
||||||
|
fill_pattern = cubic
|
||||||
|
infill_anchor = 600%
|
||||||
|
infill_anchor_max = 50
|
||||||
|
top_fill_pattern = monotonic
|
||||||
|
bottom_fill_pattern = monotonic
|
||||||
|
|
||||||
|
## Infill - Ironing
|
||||||
|
ironing = 0
|
||||||
|
ironing_type = top
|
||||||
|
ironing_flowrate = 15%
|
||||||
|
ironing_spacing = 0.1
|
||||||
|
|
||||||
|
## Infill - reduceing printing time
|
||||||
|
infill_every_layers = 2
|
||||||
|
|
||||||
|
## Infill - Advanced
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
fill_angle = 45
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
bridge_angle = 0
|
||||||
|
only_retract_when_crossing_perimeters = 0
|
||||||
|
infill_first = 0
|
||||||
|
|
||||||
|
# Skirts and brim
|
||||||
|
|
||||||
|
## Skirts and brim - Skirt
|
||||||
|
skirts = 1
|
||||||
|
skirt_distance = 2
|
||||||
|
skirt_height = 1
|
||||||
|
draft_shield = disabled
|
||||||
|
min_skirt_length = 4
|
||||||
|
|
||||||
|
## Skirts and brim - Brim
|
||||||
|
brim_type = outer_only
|
||||||
|
brim_width = 0
|
||||||
|
brim_separation = 0
|
||||||
|
|
||||||
|
# Support material
|
||||||
|
|
||||||
|
## Support material - Support material
|
||||||
|
support_material = 0
|
||||||
|
support_material_auto = 1
|
||||||
|
support_material_threshold = 45
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
raft_first_layer_density = 90%
|
||||||
|
raft_first_layer_expansion = 3
|
||||||
|
|
||||||
|
## Support material - Raft
|
||||||
|
raft_layers = 0
|
||||||
|
raft_contact_distance = 0.1
|
||||||
|
raft_expansion = 1.5
|
||||||
|
|
||||||
|
## Support material - options for support material and raft
|
||||||
|
support_material_style = grid
|
||||||
|
support_material_contact_distance = 0.15
|
||||||
|
support_material_bottom_contact_distance = 0
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_spacing = 2
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_closing_radius = 2
|
||||||
|
support_material_interface_layers = 2
|
||||||
|
support_material_bottom_interface_layers = -1
|
||||||
|
support_material_interface_pattern = rectilinear
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_buildplate_only = 0
|
||||||
|
support_material_xy_spacing = 60%
|
||||||
|
dont_support_bridges = 1
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
|
||||||
|
## Support material - Organic supports
|
||||||
|
support_tree_angle = 40
|
||||||
|
support_tree_angle_slow = 25
|
||||||
|
support_tree_branch_diameter = 2
|
||||||
|
support_tree_branch_diameter_angle = 5
|
||||||
|
support_tree_branch_diameter_double_wall = 3
|
||||||
|
support_tree_tip_diameter = 0.8
|
||||||
|
support_tree_branch_distance = 1
|
||||||
|
support_tree_top_rate = 15%
|
||||||
|
|
||||||
|
# Speed
|
||||||
|
|
||||||
|
## Speed - Speed for print moves
|
||||||
|
perimeter_speed = 70
|
||||||
|
small_perimeter_speed = 35
|
||||||
|
external_perimeter_speed = 70
|
||||||
|
infill_speed = 80
|
||||||
|
solid_infill_speed = 80
|
||||||
|
top_solid_infill_speed = 50
|
||||||
|
support_material_speed = 60
|
||||||
|
support_material_interface_speed = 100%
|
||||||
|
bridge_speed = 30
|
||||||
|
gap_fill_speed = 70
|
||||||
|
ironing_speed = 15
|
||||||
|
|
||||||
|
## Speed - Dynamic overhang speed
|
||||||
|
enable_dynamic_overhang_speeds = 0
|
||||||
|
overhang_speed_0 = 15
|
||||||
|
overhang_speed_1 = 15
|
||||||
|
overhang_speed_2 = 20
|
||||||
|
overhang_speed_3 = 25
|
||||||
|
|
||||||
|
## Speed - Speed for non-print moves
|
||||||
|
travel_speed = 150
|
||||||
|
travel_speed_z = 5
|
||||||
|
|
||||||
|
## Speed - Modifiers
|
||||||
|
first_layer_speed = 20
|
||||||
|
first_layer_speed_over_raft = 30
|
||||||
|
|
||||||
|
## Speed - Acceleration control (advanced)
|
||||||
|
external_perimeter_acceleration = 0
|
||||||
|
perimeter_acceleration = 0
|
||||||
|
top_solid_infill_acceleration = 0
|
||||||
|
solid_infill_acceleration = 0
|
||||||
|
infill_acceleration = 0
|
||||||
|
bridge_acceleration = 0
|
||||||
|
first_layer_acceleration = 0
|
||||||
|
first_layer_acceleration_over_raft = 0
|
||||||
|
wipe_tower_acceleration = 0
|
||||||
|
travel_acceleration = 0
|
||||||
|
default_acceleration = 0
|
||||||
|
|
||||||
|
## Speed - Auto speed (advanced)
|
||||||
|
max_print_speed = 100
|
||||||
|
max_volumetric_speed = 14
|
||||||
|
|
||||||
|
## Speed - Pressure equalizer
|
||||||
|
max_volumetric_extrusion_rate_slope_negative = 0
|
||||||
|
max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
|
|
||||||
|
# Multiple Extruders
|
||||||
|
|
||||||
|
## Multiple Extruders - Extruders
|
||||||
|
perimeter_extruder = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
support_material_extruder = 0
|
||||||
|
support_material_interface_extruder = 0
|
||||||
|
wipe_tower_extruder = 0
|
||||||
|
|
||||||
|
## Multiple Extruders - Ooze prevention
|
||||||
|
ooze_prevention = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
|
||||||
|
## Multiple Extruders - Wipe tower
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_x = 10
|
||||||
|
wipe_tower_y = 180
|
||||||
|
wipe_tower_width = 30
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_brim_width = 2
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_cone_angle = 0
|
||||||
|
wipe_tower_extra_spacing = 100%
|
||||||
|
wipe_tower_extra_flow = 100%
|
||||||
|
wipe_tower_no_sparse_layers = 0
|
||||||
|
single_extruder_multi_material_priming = 0
|
||||||
|
|
||||||
|
## Multiple Extruders - Advanced
|
||||||
|
interface_shells = 0
|
||||||
|
mmu_segmented_region_max_width = 0
|
||||||
|
mmu_segmented_region_interlocking_depth = 0
|
||||||
|
|
||||||
|
# Advanced
|
||||||
|
|
||||||
|
## Advanced - Extrution with
|
||||||
|
extrusion_width = 0.65
|
||||||
|
first_layer_extrusion_width = 0.42
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
infill_extrusion_width = 0.45
|
||||||
|
solid_infill_extrusion_width = 0
|
||||||
|
top_infill_extrusion_width = 0
|
||||||
|
support_material_extrusion_width = 0.38
|
||||||
|
|
||||||
|
## Advanced - overlap
|
||||||
|
infill_overlap = 25%
|
||||||
|
|
||||||
|
## Advanced - Flow
|
||||||
|
bridge_flow_ratio = 0.95
|
||||||
|
|
||||||
|
## Advanced - Slicing
|
||||||
|
slice_closing_radius = 0.049
|
||||||
|
slicing_mode = regular
|
||||||
|
resolution = 0
|
||||||
|
gcode_resolution = 0.0125
|
||||||
|
arc_fitting = disabled
|
||||||
|
xy_size_compensation = 0
|
||||||
|
elefant_foot_compensation = 0.15
|
||||||
|
|
||||||
|
## Advanced - Archne perimeter generator
|
||||||
|
wall_transition_angle = 10
|
||||||
|
wall_transition_filter_deviation = 25%
|
||||||
|
wall_transition_length = 100%
|
||||||
|
wall_distribution_count = 1
|
||||||
|
min_bead_width = 85%
|
||||||
|
min_feature_size = 25%
|
||||||
|
|
||||||
|
# Output options
|
||||||
|
|
||||||
|
## Output options - Sequential printing
|
||||||
|
complete_objects = 0
|
||||||
|
extruder_clearance_height = 25
|
||||||
|
extruder_clearance_radius = 45
|
||||||
|
|
||||||
|
## Output options - Output file
|
||||||
|
gcode_comments = 1
|
||||||
|
gcode_label_objects = disabled
|
||||||
|
output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
|
||||||
|
|
||||||
|
## Output options - Other
|
||||||
|
gcode_substitutions =
|
||||||
|
|
||||||
|
## Output options - post-processing scripts
|
||||||
|
post_process =
|
||||||
|
|
||||||
|
# notes
|
||||||
|
|
||||||
|
notes =
|
||||||
|
|
||||||
|
# Dependencies
|
||||||
|
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
|
||||||
|
|
||||||
|
|
||||||
|
[print:0.10mm - nice @pringles]
|
||||||
|
inherits = *pringles*
|
||||||
|
layer_height = 0.1
|
||||||
|
bottom_solid_layers = 4
|
||||||
|
top_solid_layers = 6
|
||||||
|
|
||||||
|
[print:0.20mm - default @pringles]
|
||||||
|
inherits = *pringles*
|
||||||
|
layer_height = 0.20
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
top_solid_layers = 4
|
||||||
|
|
||||||
|
[print:0.30mm - fast @pringles]
|
||||||
|
inherits = *pringles*
|
||||||
|
layer_height = 0.3
|
||||||
|
bottom_solid_layers = 2
|
||||||
|
top_solid_layers = 2
|
||||||
|
|
||||||
|
[print:*speed boat@pringles*]
|
||||||
|
inherits = *pringles*
|
||||||
|
layer_height = 0.25
|
||||||
|
bottom_solid_layers = 3
|
||||||
|
top_solid_layers = 3
|
||||||
|
perimeters = 2
|
||||||
|
|
||||||
|
# extrution width
|
||||||
|
external_perimeter_extrusion_width = 0.5
|
||||||
|
extrusion_width = 0.5
|
||||||
|
first_layer_extrusion_width = 0.5
|
||||||
|
infill_extrusion_width = 0.5
|
||||||
|
perimeter_extrusion_width = 0.5
|
||||||
|
solid_infill_extrusion_width = 0.5
|
||||||
|
support_material_extrusion_width = 0.5
|
||||||
|
top_infill_extrusion_width = 0.5
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
########################################################################
|
||||||
|
### Fillements #########################################################
|
||||||
|
########################################################################
|
||||||
|
|
||||||
|
[filament:PLA @pringles]
|
||||||
|
filament_colour = #DDDDDD
|
||||||
|
filament_diameter = 1.75
|
||||||
|
extrusion_multiplier = 1
|
||||||
|
filament_density = 1.24
|
||||||
|
filament_cost = 25
|
||||||
|
filament_spool_weight = 0
|
||||||
|
|
||||||
|
idle_temperature = nil
|
||||||
|
first_layer_temperature = 205
|
||||||
|
temperature = 205
|
||||||
|
first_layer_bed_temperature = 50
|
||||||
|
bed_temperature = 50
|
||||||
|
chamber_temperature = 0
|
||||||
|
chamber_minimal_temperature = 0
|
||||||
|
|
||||||
|
fan_always_on = 1
|
||||||
|
cooling = 1
|
||||||
|
|
||||||
|
max_fan_speed = 100
|
||||||
|
min_fan_speed = 100
|
||||||
|
bridge_fan_speed = 100
|
||||||
|
disable_fan_first_layers = 1
|
||||||
|
full_fan_speed_layer = 0
|
||||||
|
|
||||||
|
enable_dynamic_fan_speeds = 0
|
||||||
|
overhang_fan_speed_0 = 0
|
||||||
|
overhang_fan_speed_1 = 0
|
||||||
|
overhang_fan_speed_2 = 0
|
||||||
|
overhang_fan_speed_3 = 0
|
||||||
|
|
||||||
|
fan_below_layer_time = 100
|
||||||
|
slowdown_below_layer_time = 20
|
||||||
|
min_print_speed = 15
|
||||||
|
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
filament_cooling_final_speed = 3.4
|
||||||
|
filament_cooling_initial_speed = 2.2
|
||||||
|
filament_cooling_moves = 4
|
||||||
|
filament_deretract_speed = nil
|
||||||
|
filament_infill_max_crossing_speed = 0
|
||||||
|
filament_infill_max_speed = 0
|
||||||
|
filament_load_time = 0
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_loading_speed_start = 3
|
||||||
|
filament_max_volumetric_speed = 15
|
||||||
|
filament_minimal_purge_on_wipe_tower = 15
|
||||||
|
filament_multitool_ramming = 0
|
||||||
|
filament_multitool_ramming_flow = 10
|
||||||
|
filament_multitool_ramming_volume = 10
|
||||||
|
filament_notes = ""
|
||||||
|
filament_purge_multiplier = 100%
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_retract_before_travel = nil
|
||||||
|
filament_retract_before_wipe = nil
|
||||||
|
filament_retract_layer_change = nil
|
||||||
|
filament_retract_length = nil
|
||||||
|
filament_retract_length_toolchange = nil
|
||||||
|
filament_retract_lift = nil
|
||||||
|
filament_retract_lift_above = nil
|
||||||
|
filament_retract_lift_below = nil
|
||||||
|
filament_retract_restart_extra = nil
|
||||||
|
filament_retract_restart_extra_toolchange = nil
|
||||||
|
filament_retract_speed = nil
|
||||||
|
filament_settings_id = ""
|
||||||
|
filament_shrinkage_compensation_xy = 0%
|
||||||
|
filament_shrinkage_compensation_z = 0%
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_stamping_distance = 0
|
||||||
|
filament_stamping_loading_speed = 20
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_travel_lift_before_obstacle = nil
|
||||||
|
filament_travel_max_lift = nil
|
||||||
|
filament_travel_ramping_lift = nil
|
||||||
|
filament_travel_slope = nil
|
||||||
|
filament_type = PLA
|
||||||
|
filament_unload_time = 0
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
filament_unloading_speed_start = 100
|
||||||
|
filament_vendor = Generic
|
||||||
|
filament_wipe = nil
|
||||||
|
inherits = Generic PLA @ELEGOO
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
compatible_printers =
|
||||||
|
compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
|
||||||
|
compatible_prints =
|
||||||
|
compatible_prints_condition =
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
########################################################################
|
||||||
|
### Printers ###########################################################
|
||||||
|
########################################################################
|
||||||
|
|
||||||
|
[printer:pringles]
|
||||||
|
inherits =
|
||||||
|
|
||||||
|
autoemit_temperature_commands = 1
|
||||||
|
bed_custom_model =
|
||||||
|
bed_custom_texture =
|
||||||
|
bed_shape = 0x0,220x0,220x220,0x220
|
||||||
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
|
||||||
|
between_objects_gcode =
|
||||||
|
binary_gcode = 0
|
||||||
|
color_change_gcode = M600
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
default_filament_profile = "PLA @pringles"
|
||||||
|
default_print_profile = 0.20mm - default @pringles
|
||||||
|
deretract_speed = 70
|
||||||
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
|
||||||
|
extra_loading_move = -2
|
||||||
|
extruder_colour = #FCE94F
|
||||||
|
extruder_offset = 0x0
|
||||||
|
gcode_flavor = klipper
|
||||||
|
high_current_on_filament_swap = 0
|
||||||
|
host_type = prusalink
|
||||||
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||||
|
machine_limits_usage = time_estimate_only
|
||||||
|
machine_max_acceleration_e = 5000
|
||||||
|
machine_max_acceleration_extruding = 500
|
||||||
|
machine_max_acceleration_retracting = 1000
|
||||||
|
machine_max_acceleration_travel = 1500,1250
|
||||||
|
machine_max_acceleration_x = 3000
|
||||||
|
machine_max_acceleration_y = 3000
|
||||||
|
machine_max_acceleration_z = 100
|
||||||
|
machine_max_feedrate_e = 60
|
||||||
|
machine_max_feedrate_x = 300
|
||||||
|
machine_max_feedrate_y = 300
|
||||||
|
machine_max_feedrate_z = 5
|
||||||
|
machine_max_jerk_e = 5
|
||||||
|
machine_max_jerk_x = 8
|
||||||
|
machine_max_jerk_y = 8
|
||||||
|
machine_max_jerk_z = 0.4
|
||||||
|
machine_min_extruding_rate = 0
|
||||||
|
machine_min_travel_rate = 0
|
||||||
|
max_layer_height = 0.35
|
||||||
|
max_print_height = 250
|
||||||
|
min_layer_height = 0.05
|
||||||
|
multimaterial_purging = 140
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
pause_print_gcode =
|
||||||
|
prefer_clockwise_movements = 0
|
||||||
|
print_host =
|
||||||
|
printer_model = MODED-NEPTUNE2
|
||||||
|
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN\nPRINTER_PRINGELS
|
||||||
|
printer_settings_id =
|
||||||
|
printer_technology = FFF
|
||||||
|
printer_variant = 0.4
|
||||||
|
printer_vendor = FReenen
|
||||||
|
printhost_apikey =
|
||||||
|
printhost_cafile =
|
||||||
|
remaining_times = 0
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 70%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.2
|
||||||
|
retract_length_toolchange = 1
|
||||||
|
retract_lift = 0
|
||||||
|
retract_lift_above = 0
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 70
|
||||||
|
silent_mode = 0
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z20 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
||||||
|
template_custom_gcode =
|
||||||
|
thumbnails =
|
||||||
|
thumbnails_format =
|
||||||
|
toolchange_gcode =
|
||||||
|
travel_lift_before_obstacle = 0
|
||||||
|
travel_max_lift = 0
|
||||||
|
travel_ramping_lift = 0
|
||||||
|
travel_slope = 0
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 1
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 1
|
||||||
|
z_offset = 0
|
||||||
|
|
||||||
@@ -1,903 +0,0 @@
|
|||||||
# generated by PrusaSlicer 2.8.0 on 2024-07-15 at 15:53:49 UTC
|
|
||||||
|
|
||||||
[print:0.10mm - nice @soldeer_pasta]
|
|
||||||
arc_fitting = disabled
|
|
||||||
avoid_crossing_curled_overhangs = 0
|
|
||||||
avoid_crossing_perimeters = 0
|
|
||||||
avoid_crossing_perimeters_max_detour = 0
|
|
||||||
bottom_fill_pattern = monotonic
|
|
||||||
bottom_solid_layers = 4
|
|
||||||
bottom_solid_min_thickness = 0
|
|
||||||
bridge_acceleration = 0
|
|
||||||
bridge_angle = 0
|
|
||||||
bridge_flow_ratio = 0.95
|
|
||||||
bridge_speed = 25
|
|
||||||
brim_separation = 0
|
|
||||||
brim_type = outer_only
|
|
||||||
brim_width = 0
|
|
||||||
compatible_printers =
|
|
||||||
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
|
|
||||||
complete_objects = 0
|
|
||||||
default_acceleration = 0
|
|
||||||
dont_support_bridges = 1
|
|
||||||
draft_shield = disabled
|
|
||||||
elefant_foot_compensation = 0.1
|
|
||||||
enable_dynamic_overhang_speeds = 0
|
|
||||||
external_perimeter_acceleration = 0
|
|
||||||
external_perimeter_extrusion_width = 0
|
|
||||||
external_perimeter_speed = 25
|
|
||||||
external_perimeters_first = 0
|
|
||||||
extra_perimeters = 0
|
|
||||||
extra_perimeters_on_overhangs = 0
|
|
||||||
extruder_clearance_height = 25
|
|
||||||
extruder_clearance_radius = 45
|
|
||||||
extrusion_width = 0.45
|
|
||||||
fill_angle = 45
|
|
||||||
fill_density = 15%
|
|
||||||
fill_pattern = cubic
|
|
||||||
first_layer_acceleration = 0
|
|
||||||
first_layer_acceleration_over_raft = 0
|
|
||||||
first_layer_extrusion_width = 200%
|
|
||||||
first_layer_height = 0.2
|
|
||||||
first_layer_speed = 20
|
|
||||||
first_layer_speed_over_raft = 30
|
|
||||||
fuzzy_skin = none
|
|
||||||
fuzzy_skin_point_dist = 0.8
|
|
||||||
fuzzy_skin_thickness = 0.3
|
|
||||||
gap_fill_enabled = 1
|
|
||||||
gap_fill_speed = 30
|
|
||||||
gcode_comments = 1
|
|
||||||
gcode_label_objects = disabled
|
|
||||||
gcode_resolution = 0.0125
|
|
||||||
gcode_substitutions =
|
|
||||||
infill_acceleration = 0
|
|
||||||
infill_anchor = 600%
|
|
||||||
infill_anchor_max = 50
|
|
||||||
infill_every_layers = 1
|
|
||||||
infill_extruder = 1
|
|
||||||
infill_extrusion_width = 0
|
|
||||||
infill_first = 0
|
|
||||||
infill_overlap = 25%
|
|
||||||
infill_speed = 50
|
|
||||||
inherits = 0.16mm OPTIMAL @ELEGOO
|
|
||||||
interface_shells = 0
|
|
||||||
ironing = 0
|
|
||||||
ironing_flowrate = 15%
|
|
||||||
ironing_spacing = 0.1
|
|
||||||
ironing_speed = 15
|
|
||||||
ironing_type = top
|
|
||||||
layer_height = 0.1
|
|
||||||
max_print_speed = 100
|
|
||||||
max_volumetric_extrusion_rate_slope_negative = 0
|
|
||||||
max_volumetric_extrusion_rate_slope_positive = 0
|
|
||||||
max_volumetric_speed = 0
|
|
||||||
min_bead_width = 85%
|
|
||||||
min_feature_size = 25%
|
|
||||||
min_skirt_length = 4
|
|
||||||
mmu_segmented_region_interlocking_depth = 0
|
|
||||||
mmu_segmented_region_max_width = 0
|
|
||||||
notes =
|
|
||||||
only_one_perimeter_first_layer = 0
|
|
||||||
only_retract_when_crossing_perimeters = 0
|
|
||||||
ooze_prevention = 0
|
|
||||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
||||||
overhang_speed_0 = 15
|
|
||||||
overhang_speed_1 = 15
|
|
||||||
overhang_speed_2 = 20
|
|
||||||
overhang_speed_3 = 25
|
|
||||||
overhangs = 1
|
|
||||||
perimeter_acceleration = 0
|
|
||||||
perimeter_extruder = 1
|
|
||||||
perimeter_extrusion_width = 0
|
|
||||||
perimeter_generator = arachne
|
|
||||||
perimeter_speed = 40
|
|
||||||
perimeters = 3
|
|
||||||
post_process =
|
|
||||||
print_settings_id =
|
|
||||||
raft_contact_distance = 0.1
|
|
||||||
raft_expansion = 1.5
|
|
||||||
raft_first_layer_density = 90%
|
|
||||||
raft_first_layer_expansion = 3
|
|
||||||
raft_layers = 0
|
|
||||||
resolution = 0
|
|
||||||
seam_position = nearest
|
|
||||||
single_extruder_multi_material_priming = 0
|
|
||||||
skirt_distance = 2
|
|
||||||
skirt_height = 1
|
|
||||||
skirts = 1
|
|
||||||
slice_closing_radius = 0.049
|
|
||||||
slicing_mode = regular
|
|
||||||
small_perimeter_speed = 25
|
|
||||||
solid_infill_acceleration = 0
|
|
||||||
solid_infill_below_area = 0
|
|
||||||
solid_infill_every_layers = 0
|
|
||||||
solid_infill_extruder = 1
|
|
||||||
solid_infill_extrusion_width = 0
|
|
||||||
solid_infill_speed = 40
|
|
||||||
spiral_vase = 0
|
|
||||||
staggered_inner_seams = 0
|
|
||||||
standby_temperature_delta = -5
|
|
||||||
support_material = 0
|
|
||||||
support_material_angle = 0
|
|
||||||
support_material_auto = 1
|
|
||||||
support_material_bottom_contact_distance = 0
|
|
||||||
support_material_bottom_interface_layers = -1
|
|
||||||
support_material_buildplate_only = 0
|
|
||||||
support_material_closing_radius = 2
|
|
||||||
support_material_contact_distance = 0.15
|
|
||||||
support_material_enforce_layers = 0
|
|
||||||
support_material_extruder = 0
|
|
||||||
support_material_extrusion_width = 0.38
|
|
||||||
support_material_interface_contact_loops = 0
|
|
||||||
support_material_interface_extruder = 0
|
|
||||||
support_material_interface_layers = 2
|
|
||||||
support_material_interface_pattern = rectilinear
|
|
||||||
support_material_interface_spacing = 0.2
|
|
||||||
support_material_interface_speed = 100%
|
|
||||||
support_material_pattern = rectilinear
|
|
||||||
support_material_spacing = 2
|
|
||||||
support_material_speed = 40
|
|
||||||
support_material_style = grid
|
|
||||||
support_material_synchronize_layers = 0
|
|
||||||
support_material_threshold = 45
|
|
||||||
support_material_with_sheath = 0
|
|
||||||
support_material_xy_spacing = 60%
|
|
||||||
support_tree_angle = 40
|
|
||||||
support_tree_angle_slow = 25
|
|
||||||
support_tree_branch_diameter = 2
|
|
||||||
support_tree_branch_diameter_angle = 5
|
|
||||||
support_tree_branch_diameter_double_wall = 3
|
|
||||||
support_tree_branch_distance = 1
|
|
||||||
support_tree_tip_diameter = 0.8
|
|
||||||
support_tree_top_rate = 15%
|
|
||||||
thick_bridges = 1
|
|
||||||
thin_walls = 0
|
|
||||||
top_fill_pattern = monotonic
|
|
||||||
top_infill_extrusion_width = 0
|
|
||||||
top_one_perimeter_type = none
|
|
||||||
top_solid_infill_acceleration = 0
|
|
||||||
top_solid_infill_speed = 30
|
|
||||||
top_solid_layers = 5
|
|
||||||
top_solid_min_thickness = 0
|
|
||||||
travel_acceleration = 0
|
|
||||||
travel_speed = 150
|
|
||||||
travel_speed_z = 5
|
|
||||||
wall_distribution_count = 1
|
|
||||||
wall_transition_angle = 10
|
|
||||||
wall_transition_filter_deviation = 25%
|
|
||||||
wall_transition_length = 100%
|
|
||||||
wipe_tower = 0
|
|
||||||
wipe_tower_acceleration = 0
|
|
||||||
wipe_tower_bridging = 10
|
|
||||||
wipe_tower_brim_width = 2
|
|
||||||
wipe_tower_cone_angle = 0
|
|
||||||
wipe_tower_extra_flow = 100%
|
|
||||||
wipe_tower_extra_spacing = 100%
|
|
||||||
wipe_tower_extruder = 0
|
|
||||||
wipe_tower_no_sparse_layers = 0
|
|
||||||
wipe_tower_rotation_angle = 0
|
|
||||||
wipe_tower_width = 60
|
|
||||||
wipe_tower_x = 170
|
|
||||||
wipe_tower_y = 140
|
|
||||||
xy_size_compensation = 0
|
|
||||||
|
|
||||||
[print:0.20mm - default @soldeer_pasta]
|
|
||||||
arc_fitting = disabled
|
|
||||||
avoid_crossing_curled_overhangs = 0
|
|
||||||
avoid_crossing_perimeters = 0
|
|
||||||
avoid_crossing_perimeters_max_detour = 0
|
|
||||||
bottom_fill_pattern = monotonic
|
|
||||||
bottom_solid_layers = 3
|
|
||||||
bottom_solid_min_thickness = 0
|
|
||||||
bridge_acceleration = 0
|
|
||||||
bridge_angle = 0
|
|
||||||
bridge_flow_ratio = 0.95
|
|
||||||
bridge_speed = 25
|
|
||||||
brim_separation = 0
|
|
||||||
brim_type = outer_only
|
|
||||||
brim_width = 0
|
|
||||||
compatible_printers =
|
|
||||||
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
|
|
||||||
complete_objects = 0
|
|
||||||
default_acceleration = 0
|
|
||||||
dont_support_bridges = 1
|
|
||||||
draft_shield = disabled
|
|
||||||
elefant_foot_compensation = 0.1
|
|
||||||
enable_dynamic_overhang_speeds = 0
|
|
||||||
external_perimeter_acceleration = 0
|
|
||||||
external_perimeter_extrusion_width = 0
|
|
||||||
external_perimeter_speed = 40
|
|
||||||
external_perimeters_first = 0
|
|
||||||
extra_perimeters = 0
|
|
||||||
extra_perimeters_on_overhangs = 0
|
|
||||||
extruder_clearance_height = 25
|
|
||||||
extruder_clearance_radius = 45
|
|
||||||
extrusion_width = 0.45
|
|
||||||
fill_angle = 45
|
|
||||||
fill_density = 15%
|
|
||||||
fill_pattern = cubic
|
|
||||||
first_layer_acceleration = 0
|
|
||||||
first_layer_acceleration_over_raft = 0
|
|
||||||
first_layer_extrusion_width = 200%
|
|
||||||
first_layer_height = 0.2
|
|
||||||
first_layer_speed = 20
|
|
||||||
first_layer_speed_over_raft = 30
|
|
||||||
fuzzy_skin = none
|
|
||||||
fuzzy_skin_point_dist = 0.8
|
|
||||||
fuzzy_skin_thickness = 0.3
|
|
||||||
gap_fill_enabled = 1
|
|
||||||
gap_fill_speed = 30
|
|
||||||
gcode_comments = 1
|
|
||||||
gcode_label_objects = disabled
|
|
||||||
gcode_resolution = 0.0125
|
|
||||||
gcode_substitutions =
|
|
||||||
infill_acceleration = 0
|
|
||||||
infill_anchor = 600%
|
|
||||||
infill_anchor_max = 50
|
|
||||||
infill_every_layers = 1
|
|
||||||
infill_extruder = 1
|
|
||||||
infill_extrusion_width = 0
|
|
||||||
infill_first = 0
|
|
||||||
infill_overlap = 25%
|
|
||||||
infill_speed = 70
|
|
||||||
inherits = 0.16mm OPTIMAL @ELEGOO
|
|
||||||
interface_shells = 0
|
|
||||||
ironing = 0
|
|
||||||
ironing_flowrate = 15%
|
|
||||||
ironing_spacing = 0.1
|
|
||||||
ironing_speed = 15
|
|
||||||
ironing_type = top
|
|
||||||
layer_height = 0.2
|
|
||||||
max_print_speed = 100
|
|
||||||
max_volumetric_extrusion_rate_slope_negative = 0
|
|
||||||
max_volumetric_extrusion_rate_slope_positive = 0
|
|
||||||
max_volumetric_speed = 0
|
|
||||||
min_bead_width = 85%
|
|
||||||
min_feature_size = 25%
|
|
||||||
min_skirt_length = 4
|
|
||||||
mmu_segmented_region_interlocking_depth = 0
|
|
||||||
mmu_segmented_region_max_width = 0
|
|
||||||
notes =
|
|
||||||
only_one_perimeter_first_layer = 0
|
|
||||||
only_retract_when_crossing_perimeters = 0
|
|
||||||
ooze_prevention = 0
|
|
||||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
||||||
overhang_speed_0 = 15
|
|
||||||
overhang_speed_1 = 15
|
|
||||||
overhang_speed_2 = 20
|
|
||||||
overhang_speed_3 = 25
|
|
||||||
overhangs = 1
|
|
||||||
perimeter_acceleration = 0
|
|
||||||
perimeter_extruder = 1
|
|
||||||
perimeter_extrusion_width = 0
|
|
||||||
perimeter_generator = arachne
|
|
||||||
perimeter_speed = 50
|
|
||||||
perimeters = 2
|
|
||||||
post_process =
|
|
||||||
print_settings_id =
|
|
||||||
raft_contact_distance = 0.1
|
|
||||||
raft_expansion = 1.5
|
|
||||||
raft_first_layer_density = 90%
|
|
||||||
raft_first_layer_expansion = 3
|
|
||||||
raft_layers = 0
|
|
||||||
resolution = 0
|
|
||||||
seam_position = nearest
|
|
||||||
single_extruder_multi_material_priming = 0
|
|
||||||
skirt_distance = 2
|
|
||||||
skirt_height = 1
|
|
||||||
skirts = 1
|
|
||||||
slice_closing_radius = 0.049
|
|
||||||
slicing_mode = regular
|
|
||||||
small_perimeter_speed = 30
|
|
||||||
solid_infill_acceleration = 0
|
|
||||||
solid_infill_below_area = 0
|
|
||||||
solid_infill_every_layers = 0
|
|
||||||
solid_infill_extruder = 1
|
|
||||||
solid_infill_extrusion_width = 0
|
|
||||||
solid_infill_speed = 60
|
|
||||||
spiral_vase = 0
|
|
||||||
staggered_inner_seams = 0
|
|
||||||
standby_temperature_delta = -5
|
|
||||||
support_material = 0
|
|
||||||
support_material_angle = 0
|
|
||||||
support_material_auto = 1
|
|
||||||
support_material_bottom_contact_distance = 0
|
|
||||||
support_material_bottom_interface_layers = -1
|
|
||||||
support_material_buildplate_only = 0
|
|
||||||
support_material_closing_radius = 2
|
|
||||||
support_material_contact_distance = 0.15
|
|
||||||
support_material_enforce_layers = 0
|
|
||||||
support_material_extruder = 0
|
|
||||||
support_material_extrusion_width = 0.38
|
|
||||||
support_material_interface_contact_loops = 0
|
|
||||||
support_material_interface_extruder = 0
|
|
||||||
support_material_interface_layers = 2
|
|
||||||
support_material_interface_pattern = rectilinear
|
|
||||||
support_material_interface_spacing = 0.2
|
|
||||||
support_material_interface_speed = 100%
|
|
||||||
support_material_pattern = rectilinear
|
|
||||||
support_material_spacing = 2
|
|
||||||
support_material_speed = 70
|
|
||||||
support_material_style = grid
|
|
||||||
support_material_synchronize_layers = 0
|
|
||||||
support_material_threshold = 45
|
|
||||||
support_material_with_sheath = 0
|
|
||||||
support_material_xy_spacing = 60%
|
|
||||||
support_tree_angle = 40
|
|
||||||
support_tree_angle_slow = 25
|
|
||||||
support_tree_branch_diameter = 2
|
|
||||||
support_tree_branch_diameter_angle = 5
|
|
||||||
support_tree_branch_diameter_double_wall = 3
|
|
||||||
support_tree_branch_distance = 1
|
|
||||||
support_tree_tip_diameter = 0.8
|
|
||||||
support_tree_top_rate = 15%
|
|
||||||
thick_bridges = 1
|
|
||||||
thin_walls = 0
|
|
||||||
top_fill_pattern = monotonic
|
|
||||||
top_infill_extrusion_width = 0
|
|
||||||
top_one_perimeter_type = none
|
|
||||||
top_solid_infill_acceleration = 0
|
|
||||||
top_solid_infill_speed = 60
|
|
||||||
top_solid_layers = 4
|
|
||||||
top_solid_min_thickness = 0
|
|
||||||
travel_acceleration = 0
|
|
||||||
travel_speed = 150
|
|
||||||
travel_speed_z = 5
|
|
||||||
wall_distribution_count = 1
|
|
||||||
wall_transition_angle = 10
|
|
||||||
wall_transition_filter_deviation = 25%
|
|
||||||
wall_transition_length = 100%
|
|
||||||
wipe_tower = 0
|
|
||||||
wipe_tower_acceleration = 0
|
|
||||||
wipe_tower_bridging = 10
|
|
||||||
wipe_tower_brim_width = 2
|
|
||||||
wipe_tower_cone_angle = 0
|
|
||||||
wipe_tower_extra_flow = 100%
|
|
||||||
wipe_tower_extra_spacing = 100%
|
|
||||||
wipe_tower_extruder = 0
|
|
||||||
wipe_tower_no_sparse_layers = 0
|
|
||||||
wipe_tower_rotation_angle = 0
|
|
||||||
wipe_tower_width = 60
|
|
||||||
wipe_tower_x = 170
|
|
||||||
wipe_tower_y = 140
|
|
||||||
xy_size_compensation = 0
|
|
||||||
|
|
||||||
[print:0.30mm - fast @soldeer_pasta]
|
|
||||||
arc_fitting = disabled
|
|
||||||
avoid_crossing_curled_overhangs = 0
|
|
||||||
avoid_crossing_perimeters = 0
|
|
||||||
avoid_crossing_perimeters_max_detour = 0
|
|
||||||
bottom_fill_pattern = monotonic
|
|
||||||
bottom_solid_layers = 3
|
|
||||||
bottom_solid_min_thickness = 0
|
|
||||||
bridge_acceleration = 0
|
|
||||||
bridge_angle = 0
|
|
||||||
bridge_flow_ratio = 0.95
|
|
||||||
bridge_speed = 30
|
|
||||||
brim_separation = 0
|
|
||||||
brim_type = outer_only
|
|
||||||
brim_width = 0
|
|
||||||
compatible_printers =
|
|
||||||
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
|
|
||||||
complete_objects = 0
|
|
||||||
default_acceleration = 0
|
|
||||||
dont_support_bridges = 1
|
|
||||||
draft_shield = disabled
|
|
||||||
elefant_foot_compensation = 0.1
|
|
||||||
enable_dynamic_overhang_speeds = 0
|
|
||||||
external_perimeter_acceleration = 0
|
|
||||||
external_perimeter_extrusion_width = 0
|
|
||||||
external_perimeter_speed = 70
|
|
||||||
external_perimeters_first = 0
|
|
||||||
extra_perimeters = 0
|
|
||||||
extra_perimeters_on_overhangs = 0
|
|
||||||
extruder_clearance_height = 25
|
|
||||||
extruder_clearance_radius = 45
|
|
||||||
extrusion_width = 0.65
|
|
||||||
fill_angle = 45
|
|
||||||
fill_density = 15%
|
|
||||||
fill_pattern = cubic
|
|
||||||
first_layer_acceleration = 0
|
|
||||||
first_layer_acceleration_over_raft = 0
|
|
||||||
first_layer_extrusion_width = 0.42
|
|
||||||
first_layer_height = 0.2
|
|
||||||
first_layer_speed = 20
|
|
||||||
first_layer_speed_over_raft = 30
|
|
||||||
fuzzy_skin = none
|
|
||||||
fuzzy_skin_point_dist = 0.8
|
|
||||||
fuzzy_skin_thickness = 0.3
|
|
||||||
gap_fill_enabled = 1
|
|
||||||
gap_fill_speed = 70
|
|
||||||
gcode_comments = 1
|
|
||||||
gcode_label_objects = disabled
|
|
||||||
gcode_resolution = 0.0125
|
|
||||||
gcode_substitutions =
|
|
||||||
infill_acceleration = 0
|
|
||||||
infill_anchor = 600%
|
|
||||||
infill_anchor_max = 50
|
|
||||||
infill_every_layers = 1
|
|
||||||
infill_extruder = 1
|
|
||||||
infill_extrusion_width = 0.45
|
|
||||||
infill_first = 0
|
|
||||||
infill_overlap = 25%
|
|
||||||
infill_speed = 80
|
|
||||||
inherits = 0.16mm OPTIMAL @ELEGOO
|
|
||||||
interface_shells = 0
|
|
||||||
ironing = 0
|
|
||||||
ironing_flowrate = 15%
|
|
||||||
ironing_spacing = 0.1
|
|
||||||
ironing_speed = 15
|
|
||||||
ironing_type = top
|
|
||||||
layer_height = 0.3
|
|
||||||
max_print_speed = 100
|
|
||||||
max_volumetric_extrusion_rate_slope_negative = 0
|
|
||||||
max_volumetric_extrusion_rate_slope_positive = 0
|
|
||||||
max_volumetric_speed = 0
|
|
||||||
min_bead_width = 85%
|
|
||||||
min_feature_size = 25%
|
|
||||||
min_skirt_length = 4
|
|
||||||
mmu_segmented_region_interlocking_depth = 0
|
|
||||||
mmu_segmented_region_max_width = 0
|
|
||||||
notes =
|
|
||||||
only_one_perimeter_first_layer = 0
|
|
||||||
only_retract_when_crossing_perimeters = 0
|
|
||||||
ooze_prevention = 0
|
|
||||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
||||||
overhang_speed_0 = 15
|
|
||||||
overhang_speed_1 = 15
|
|
||||||
overhang_speed_2 = 20
|
|
||||||
overhang_speed_3 = 25
|
|
||||||
overhangs = 1
|
|
||||||
perimeter_acceleration = 0
|
|
||||||
perimeter_extruder = 1
|
|
||||||
perimeter_extrusion_width = 0
|
|
||||||
perimeter_generator = arachne
|
|
||||||
perimeter_speed = 70
|
|
||||||
perimeters = 2
|
|
||||||
post_process =
|
|
||||||
print_settings_id =
|
|
||||||
raft_contact_distance = 0.1
|
|
||||||
raft_expansion = 1.5
|
|
||||||
raft_first_layer_density = 90%
|
|
||||||
raft_first_layer_expansion = 3
|
|
||||||
raft_layers = 0
|
|
||||||
resolution = 0
|
|
||||||
seam_position = nearest
|
|
||||||
single_extruder_multi_material_priming = 0
|
|
||||||
skirt_distance = 2
|
|
||||||
skirt_height = 1
|
|
||||||
skirts = 1
|
|
||||||
slice_closing_radius = 0.049
|
|
||||||
slicing_mode = regular
|
|
||||||
small_perimeter_speed = 35
|
|
||||||
solid_infill_acceleration = 0
|
|
||||||
solid_infill_below_area = 0
|
|
||||||
solid_infill_every_layers = 0
|
|
||||||
solid_infill_extruder = 1
|
|
||||||
solid_infill_extrusion_width = 0
|
|
||||||
solid_infill_speed = 80
|
|
||||||
spiral_vase = 0
|
|
||||||
staggered_inner_seams = 0
|
|
||||||
standby_temperature_delta = -5
|
|
||||||
support_material = 0
|
|
||||||
support_material_angle = 0
|
|
||||||
support_material_auto = 1
|
|
||||||
support_material_bottom_contact_distance = 0
|
|
||||||
support_material_bottom_interface_layers = -1
|
|
||||||
support_material_buildplate_only = 0
|
|
||||||
support_material_closing_radius = 2
|
|
||||||
support_material_contact_distance = 0.15
|
|
||||||
support_material_enforce_layers = 0
|
|
||||||
support_material_extruder = 0
|
|
||||||
support_material_extrusion_width = 0.38
|
|
||||||
support_material_interface_contact_loops = 0
|
|
||||||
support_material_interface_extruder = 0
|
|
||||||
support_material_interface_layers = 2
|
|
||||||
support_material_interface_pattern = rectilinear
|
|
||||||
support_material_interface_spacing = 0.2
|
|
||||||
support_material_interface_speed = 100%
|
|
||||||
support_material_pattern = rectilinear
|
|
||||||
support_material_spacing = 2
|
|
||||||
support_material_speed = 60
|
|
||||||
support_material_style = grid
|
|
||||||
support_material_synchronize_layers = 0
|
|
||||||
support_material_threshold = 45
|
|
||||||
support_material_with_sheath = 0
|
|
||||||
support_material_xy_spacing = 60%
|
|
||||||
support_tree_angle = 40
|
|
||||||
support_tree_angle_slow = 25
|
|
||||||
support_tree_branch_diameter = 2
|
|
||||||
support_tree_branch_diameter_angle = 5
|
|
||||||
support_tree_branch_diameter_double_wall = 3
|
|
||||||
support_tree_branch_distance = 1
|
|
||||||
support_tree_tip_diameter = 0.8
|
|
||||||
support_tree_top_rate = 15%
|
|
||||||
thick_bridges = 1
|
|
||||||
thin_walls = 0
|
|
||||||
top_fill_pattern = monotonic
|
|
||||||
top_infill_extrusion_width = 0
|
|
||||||
top_one_perimeter_type = none
|
|
||||||
top_solid_infill_acceleration = 0
|
|
||||||
top_solid_infill_speed = 50
|
|
||||||
top_solid_layers = 2
|
|
||||||
top_solid_min_thickness = 0
|
|
||||||
travel_acceleration = 0
|
|
||||||
travel_speed = 150
|
|
||||||
travel_speed_z = 5
|
|
||||||
wall_distribution_count = 1
|
|
||||||
wall_transition_angle = 10
|
|
||||||
wall_transition_filter_deviation = 25%
|
|
||||||
wall_transition_length = 100%
|
|
||||||
wipe_tower = 0
|
|
||||||
wipe_tower_acceleration = 0
|
|
||||||
wipe_tower_bridging = 10
|
|
||||||
wipe_tower_brim_width = 2
|
|
||||||
wipe_tower_cone_angle = 0
|
|
||||||
wipe_tower_extra_flow = 100%
|
|
||||||
wipe_tower_extra_spacing = 100%
|
|
||||||
wipe_tower_extruder = 0
|
|
||||||
wipe_tower_no_sparse_layers = 0
|
|
||||||
wipe_tower_rotation_angle = 0
|
|
||||||
wipe_tower_width = 60
|
|
||||||
wipe_tower_x = 170
|
|
||||||
wipe_tower_y = 140
|
|
||||||
xy_size_compensation = 0
|
|
||||||
|
|
||||||
[print:speed boat @soldeer_pasta]
|
|
||||||
arc_fitting = disabled
|
|
||||||
avoid_crossing_curled_overhangs = 0
|
|
||||||
avoid_crossing_perimeters = 0
|
|
||||||
avoid_crossing_perimeters_max_detour = 0
|
|
||||||
bottom_fill_pattern = monotonic
|
|
||||||
bottom_solid_layers = 3
|
|
||||||
bottom_solid_min_thickness = 0
|
|
||||||
bridge_acceleration = 0
|
|
||||||
bridge_angle = 0
|
|
||||||
bridge_flow_ratio = 0.95
|
|
||||||
bridge_speed = 30
|
|
||||||
brim_separation = 0
|
|
||||||
brim_type = outer_only
|
|
||||||
brim_width = 0
|
|
||||||
compatible_printers =
|
|
||||||
compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
|
|
||||||
complete_objects = 0
|
|
||||||
default_acceleration = 0
|
|
||||||
dont_support_bridges = 1
|
|
||||||
draft_shield = disabled
|
|
||||||
elefant_foot_compensation = 0.1
|
|
||||||
enable_dynamic_overhang_speeds = 0
|
|
||||||
external_perimeter_acceleration = 0
|
|
||||||
external_perimeter_extrusion_width = 0
|
|
||||||
external_perimeter_speed = 70
|
|
||||||
external_perimeters_first = 0
|
|
||||||
extra_perimeters = 0
|
|
||||||
extra_perimeters_on_overhangs = 0
|
|
||||||
extruder_clearance_height = 25
|
|
||||||
extruder_clearance_radius = 45
|
|
||||||
extrusion_width = 0.5
|
|
||||||
fill_angle = 45
|
|
||||||
fill_density = 10%
|
|
||||||
fill_pattern = cubic
|
|
||||||
first_layer_acceleration = 0
|
|
||||||
first_layer_acceleration_over_raft = 0
|
|
||||||
first_layer_extrusion_width = 0.42
|
|
||||||
first_layer_height = 0.2
|
|
||||||
first_layer_speed = 20
|
|
||||||
first_layer_speed_over_raft = 30
|
|
||||||
fuzzy_skin = none
|
|
||||||
fuzzy_skin_point_dist = 0.8
|
|
||||||
fuzzy_skin_thickness = 0.3
|
|
||||||
gap_fill_enabled = 1
|
|
||||||
gap_fill_speed = 70
|
|
||||||
gcode_comments = 1
|
|
||||||
gcode_label_objects = disabled
|
|
||||||
gcode_resolution = 0.0125
|
|
||||||
gcode_substitutions =
|
|
||||||
infill_acceleration = 0
|
|
||||||
infill_anchor = 600%
|
|
||||||
infill_anchor_max = 50
|
|
||||||
infill_every_layers = 1
|
|
||||||
infill_extruder = 1
|
|
||||||
infill_extrusion_width = 0.45
|
|
||||||
infill_first = 0
|
|
||||||
infill_overlap = 25%
|
|
||||||
infill_speed = 80
|
|
||||||
inherits = 0.16mm OPTIMAL @ELEGOO
|
|
||||||
interface_shells = 0
|
|
||||||
ironing = 0
|
|
||||||
ironing_flowrate = 15%
|
|
||||||
ironing_spacing = 0.1
|
|
||||||
ironing_speed = 15
|
|
||||||
ironing_type = top
|
|
||||||
layer_height = 0.25
|
|
||||||
max_print_speed = 100
|
|
||||||
max_volumetric_extrusion_rate_slope_negative = 0
|
|
||||||
max_volumetric_extrusion_rate_slope_positive = 0
|
|
||||||
max_volumetric_speed = 0
|
|
||||||
min_bead_width = 85%
|
|
||||||
min_feature_size = 25%
|
|
||||||
min_skirt_length = 4
|
|
||||||
mmu_segmented_region_interlocking_depth = 0
|
|
||||||
mmu_segmented_region_max_width = 0
|
|
||||||
notes =
|
|
||||||
only_one_perimeter_first_layer = 0
|
|
||||||
only_retract_when_crossing_perimeters = 0
|
|
||||||
ooze_prevention = 0
|
|
||||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
||||||
overhang_speed_0 = 15
|
|
||||||
overhang_speed_1 = 15
|
|
||||||
overhang_speed_2 = 20
|
|
||||||
overhang_speed_3 = 25
|
|
||||||
overhangs = 1
|
|
||||||
perimeter_acceleration = 0
|
|
||||||
perimeter_extruder = 1
|
|
||||||
perimeter_extrusion_width = 0
|
|
||||||
perimeter_generator = arachne
|
|
||||||
perimeter_speed = 70
|
|
||||||
perimeters = 2
|
|
||||||
post_process =
|
|
||||||
print_settings_id =
|
|
||||||
raft_contact_distance = 0.1
|
|
||||||
raft_expansion = 1.5
|
|
||||||
raft_first_layer_density = 90%
|
|
||||||
raft_first_layer_expansion = 3
|
|
||||||
raft_layers = 0
|
|
||||||
resolution = 0
|
|
||||||
seam_position = nearest
|
|
||||||
single_extruder_multi_material_priming = 0
|
|
||||||
skirt_distance = 2
|
|
||||||
skirt_height = 1
|
|
||||||
skirts = 1
|
|
||||||
slice_closing_radius = 0.049
|
|
||||||
slicing_mode = regular
|
|
||||||
small_perimeter_speed = 35
|
|
||||||
solid_infill_acceleration = 0
|
|
||||||
solid_infill_below_area = 0
|
|
||||||
solid_infill_every_layers = 0
|
|
||||||
solid_infill_extruder = 1
|
|
||||||
solid_infill_extrusion_width = 0
|
|
||||||
solid_infill_speed = 80
|
|
||||||
spiral_vase = 0
|
|
||||||
staggered_inner_seams = 0
|
|
||||||
standby_temperature_delta = -5
|
|
||||||
support_material = 0
|
|
||||||
support_material_angle = 0
|
|
||||||
support_material_auto = 1
|
|
||||||
support_material_bottom_contact_distance = 0
|
|
||||||
support_material_bottom_interface_layers = -1
|
|
||||||
support_material_buildplate_only = 0
|
|
||||||
support_material_closing_radius = 2
|
|
||||||
support_material_contact_distance = 0.15
|
|
||||||
support_material_enforce_layers = 0
|
|
||||||
support_material_extruder = 0
|
|
||||||
support_material_extrusion_width = 0.38
|
|
||||||
support_material_interface_contact_loops = 0
|
|
||||||
support_material_interface_extruder = 0
|
|
||||||
support_material_interface_layers = 2
|
|
||||||
support_material_interface_pattern = rectilinear
|
|
||||||
support_material_interface_spacing = 0.2
|
|
||||||
support_material_interface_speed = 100%
|
|
||||||
support_material_pattern = rectilinear
|
|
||||||
support_material_spacing = 2
|
|
||||||
support_material_speed = 60
|
|
||||||
support_material_style = grid
|
|
||||||
support_material_synchronize_layers = 0
|
|
||||||
support_material_threshold = 45
|
|
||||||
support_material_with_sheath = 0
|
|
||||||
support_material_xy_spacing = 60%
|
|
||||||
support_tree_angle = 40
|
|
||||||
support_tree_angle_slow = 25
|
|
||||||
support_tree_branch_diameter = 2
|
|
||||||
support_tree_branch_diameter_angle = 5
|
|
||||||
support_tree_branch_diameter_double_wall = 3
|
|
||||||
support_tree_branch_distance = 1
|
|
||||||
support_tree_tip_diameter = 0.8
|
|
||||||
support_tree_top_rate = 15%
|
|
||||||
thick_bridges = 1
|
|
||||||
thin_walls = 0
|
|
||||||
top_fill_pattern = monotonic
|
|
||||||
top_infill_extrusion_width = 0
|
|
||||||
top_one_perimeter_type = none
|
|
||||||
top_solid_infill_acceleration = 0
|
|
||||||
top_solid_infill_speed = 40
|
|
||||||
top_solid_layers = 3
|
|
||||||
top_solid_min_thickness = 0
|
|
||||||
travel_acceleration = 0
|
|
||||||
travel_speed = 150
|
|
||||||
travel_speed_z = 0
|
|
||||||
wall_distribution_count = 1
|
|
||||||
wall_transition_angle = 10
|
|
||||||
wall_transition_filter_deviation = 25%
|
|
||||||
wall_transition_length = 100%
|
|
||||||
wipe_tower = 0
|
|
||||||
wipe_tower_acceleration = 0
|
|
||||||
wipe_tower_bridging = 10
|
|
||||||
wipe_tower_brim_width = 2
|
|
||||||
wipe_tower_cone_angle = 0
|
|
||||||
wipe_tower_extra_flow = 100%
|
|
||||||
wipe_tower_extra_spacing = 100%
|
|
||||||
wipe_tower_extruder = 0
|
|
||||||
wipe_tower_no_sparse_layers = 0
|
|
||||||
wipe_tower_rotation_angle = 0
|
|
||||||
wipe_tower_width = 60
|
|
||||||
wipe_tower_x = 170
|
|
||||||
wipe_tower_y = 140
|
|
||||||
xy_size_compensation = 0
|
|
||||||
|
|
||||||
[filament:PLA]
|
|
||||||
bed_temperature = 50
|
|
||||||
bridge_fan_speed = 100
|
|
||||||
chamber_minimal_temperature = 0
|
|
||||||
chamber_temperature = 0
|
|
||||||
compatible_printers =
|
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ELEGOO.*/
|
|
||||||
compatible_prints =
|
|
||||||
compatible_prints_condition =
|
|
||||||
cooling = 1
|
|
||||||
disable_fan_first_layers = 1
|
|
||||||
enable_dynamic_fan_speeds = 0
|
|
||||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
||||||
extrusion_multiplier = 1
|
|
||||||
fan_always_on = 1
|
|
||||||
fan_below_layer_time = 100
|
|
||||||
filament_colour = #DDDDDD
|
|
||||||
filament_cooling_final_speed = 3.4
|
|
||||||
filament_cooling_initial_speed = 2.2
|
|
||||||
filament_cooling_moves = 4
|
|
||||||
filament_cost = 20
|
|
||||||
filament_density = 1.24
|
|
||||||
filament_deretract_speed = nil
|
|
||||||
filament_diameter = 1.75
|
|
||||||
filament_infill_max_crossing_speed = 0
|
|
||||||
filament_infill_max_speed = 0
|
|
||||||
filament_load_time = 0
|
|
||||||
filament_loading_speed = 28
|
|
||||||
filament_loading_speed_start = 3
|
|
||||||
filament_max_volumetric_speed = 15
|
|
||||||
filament_minimal_purge_on_wipe_tower = 15
|
|
||||||
filament_multitool_ramming = 0
|
|
||||||
filament_multitool_ramming_flow = 10
|
|
||||||
filament_multitool_ramming_volume = 10
|
|
||||||
filament_notes = ""
|
|
||||||
filament_purge_multiplier = 100%
|
|
||||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
||||||
filament_retract_before_travel = nil
|
|
||||||
filament_retract_before_wipe = nil
|
|
||||||
filament_retract_layer_change = nil
|
|
||||||
filament_retract_length = nil
|
|
||||||
filament_retract_length_toolchange = nil
|
|
||||||
filament_retract_lift = nil
|
|
||||||
filament_retract_lift_above = nil
|
|
||||||
filament_retract_lift_below = nil
|
|
||||||
filament_retract_restart_extra = nil
|
|
||||||
filament_retract_restart_extra_toolchange = nil
|
|
||||||
filament_retract_speed = nil
|
|
||||||
filament_settings_id = ""
|
|
||||||
filament_shrinkage_compensation_xy = 0%
|
|
||||||
filament_shrinkage_compensation_z = 0%
|
|
||||||
filament_soluble = 0
|
|
||||||
filament_spool_weight = 0
|
|
||||||
filament_stamping_distance = 0
|
|
||||||
filament_stamping_loading_speed = 20
|
|
||||||
filament_toolchange_delay = 0
|
|
||||||
filament_travel_lift_before_obstacle = nil
|
|
||||||
filament_travel_max_lift = nil
|
|
||||||
filament_travel_ramping_lift = nil
|
|
||||||
filament_travel_slope = nil
|
|
||||||
filament_type = PLA
|
|
||||||
filament_unload_time = 0
|
|
||||||
filament_unloading_speed = 90
|
|
||||||
filament_unloading_speed_start = 100
|
|
||||||
filament_vendor = Generic
|
|
||||||
filament_wipe = nil
|
|
||||||
first_layer_bed_temperature = 50
|
|
||||||
first_layer_temperature = 205
|
|
||||||
full_fan_speed_layer = 0
|
|
||||||
idle_temperature = nil
|
|
||||||
inherits = Generic PLA @ELEGOO
|
|
||||||
max_fan_speed = 100
|
|
||||||
min_fan_speed = 100
|
|
||||||
min_print_speed = 15
|
|
||||||
overhang_fan_speed_0 = 0
|
|
||||||
overhang_fan_speed_1 = 0
|
|
||||||
overhang_fan_speed_2 = 0
|
|
||||||
overhang_fan_speed_3 = 0
|
|
||||||
slowdown_below_layer_time = 5
|
|
||||||
start_filament_gcode = "; Filament gcode\n"
|
|
||||||
temperature = 200
|
|
||||||
|
|
||||||
[printer:pringles]
|
|
||||||
autoemit_temperature_commands = 1
|
|
||||||
bed_custom_model =
|
|
||||||
bed_custom_texture =
|
|
||||||
bed_shape = 0x0,220x0,220x220,0x220
|
|
||||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
|
|
||||||
between_objects_gcode =
|
|
||||||
binary_gcode = 0
|
|
||||||
color_change_gcode = M600
|
|
||||||
cooling_tube_length = 5
|
|
||||||
cooling_tube_retraction = 91.5
|
|
||||||
default_filament_profile = "Generic PLA @ELEGOO"
|
|
||||||
default_print_profile = 0.16mm OPTIMAL @ELEGOO
|
|
||||||
deretract_speed = 70
|
|
||||||
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
|
|
||||||
extra_loading_move = -2
|
|
||||||
extruder_colour = #FCE94F
|
|
||||||
extruder_offset = 0x0
|
|
||||||
gcode_flavor = klipper
|
|
||||||
high_current_on_filament_swap = 0
|
|
||||||
host_type = prusalink
|
|
||||||
inherits = Elegoo Neptune-2
|
|
||||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
||||||
machine_limits_usage = time_estimate_only
|
|
||||||
machine_max_acceleration_e = 5000
|
|
||||||
machine_max_acceleration_extruding = 500
|
|
||||||
machine_max_acceleration_retracting = 1000
|
|
||||||
machine_max_acceleration_travel = 1500,1250
|
|
||||||
machine_max_acceleration_x = 3000
|
|
||||||
machine_max_acceleration_y = 3000
|
|
||||||
machine_max_acceleration_z = 100
|
|
||||||
machine_max_feedrate_e = 60
|
|
||||||
machine_max_feedrate_x = 300
|
|
||||||
machine_max_feedrate_y = 300
|
|
||||||
machine_max_feedrate_z = 5
|
|
||||||
machine_max_jerk_e = 5
|
|
||||||
machine_max_jerk_x = 8
|
|
||||||
machine_max_jerk_y = 8
|
|
||||||
machine_max_jerk_z = 0.4
|
|
||||||
machine_min_extruding_rate = 0
|
|
||||||
machine_min_travel_rate = 0
|
|
||||||
max_layer_height = 0.35
|
|
||||||
max_print_height = 250
|
|
||||||
min_layer_height = 0.05
|
|
||||||
multimaterial_purging = 140
|
|
||||||
nozzle_diameter = 0.4
|
|
||||||
parking_pos_retraction = 92
|
|
||||||
pause_print_gcode =
|
|
||||||
prefer_clockwise_movements = 0
|
|
||||||
print_host =
|
|
||||||
printer_model = NEPTUNE2
|
|
||||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN
|
|
||||||
printer_settings_id =
|
|
||||||
printer_technology = FFF
|
|
||||||
printer_variant = 0.4
|
|
||||||
printer_vendor =
|
|
||||||
printhost_apikey =
|
|
||||||
printhost_cafile =
|
|
||||||
remaining_times = 0
|
|
||||||
retract_before_travel = 2
|
|
||||||
retract_before_wipe = 70%
|
|
||||||
retract_layer_change = 0
|
|
||||||
retract_length = 0.2
|
|
||||||
retract_length_toolchange = 1
|
|
||||||
retract_lift = 0
|
|
||||||
retract_lift_above = 0
|
|
||||||
retract_lift_below = 0
|
|
||||||
retract_restart_extra = 0
|
|
||||||
retract_restart_extra_toolchange = 0
|
|
||||||
retract_speed = 70
|
|
||||||
silent_mode = 0
|
|
||||||
single_extruder_multi_material = 0
|
|
||||||
start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z20 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
|
||||||
template_custom_gcode =
|
|
||||||
thumbnails = 16x16/PNG, 220x124/PNG
|
|
||||||
thumbnails_format = PNG
|
|
||||||
toolchange_gcode =
|
|
||||||
travel_lift_before_obstacle = 0
|
|
||||||
travel_max_lift = 0
|
|
||||||
travel_ramping_lift = 0
|
|
||||||
travel_slope = 0
|
|
||||||
use_firmware_retraction = 0
|
|
||||||
use_relative_e_distances = 1
|
|
||||||
use_volumetric_e = 0
|
|
||||||
variable_layer_height = 1
|
|
||||||
wipe = 1
|
|
||||||
z_offset = 0
|
|
||||||
|
|
||||||
[presets]
|
|
||||||
print = 0.30mm - fast @soldeer_pasta
|
|
||||||
sla_print =
|
|
||||||
sla_material =
|
|
||||||
printer = pringles
|
|
||||||
filament = PLA
|
|
||||||
filament_1 = PLA
|
|
||||||
8
manifest.json
Normal file
8
manifest.json
Normal file
@@ -0,0 +1,8 @@
|
|||||||
|
{
|
||||||
|
"name": "FReenen",
|
||||||
|
"description": "Printer profiles from Finley van Reenen (FReenen)",
|
||||||
|
"visibility": "",
|
||||||
|
"id": "freenen",
|
||||||
|
"url": "https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/",
|
||||||
|
"offline_archive_url": "https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/FReenen.ini"
|
||||||
|
}
|
||||||
BIN
vendor_indices.zip
Normal file
BIN
vendor_indices.zip
Normal file
Binary file not shown.
2
vendor_indices/FReenen.idx
Normal file
2
vendor_indices/FReenen.idx
Normal file
@@ -0,0 +1,2 @@
|
|||||||
|
min_slic3r_version = 2.8.0
|
||||||
|
0.2.0 update to vender profile
|
||||||
Reference in New Issue
Block a user