From 60c88ad9664c95fe3cbd5d08a95b2ac5e459869d Mon Sep 17 00:00:00 2001
From: FReenen <git@finnvanreenen.nl>
Date: Mon, 22 Jul 2024 19:36:58 +0200
Subject: [PATCH] update to a vender profile

---
 FReenen.zip                   | Bin 0 -> 834 bytes
 FReenen/0.2.0.ini             | 513 +++++++++++++++++++
 PrusaSlicer_config_bundle.ini | 903 ----------------------------------
 manifest.json                 |   8 +
 vendor_indices.zip            | Bin 0 -> 180 bytes
 vendor_indices/FReenen.idx    |   2 +
 zip.sh                        |   6 +
 7 files changed, 529 insertions(+), 903 deletions(-)
 create mode 100644 FReenen.zip
 create mode 100644 FReenen/0.2.0.ini
 delete mode 100644 PrusaSlicer_config_bundle.ini
 create mode 100644 manifest.json
 create mode 100644 vendor_indices.zip
 create mode 100644 vendor_indices/FReenen.idx
 create mode 100644 zip.sh

diff --git a/FReenen.zip b/FReenen.zip
new file mode 100644
index 0000000000000000000000000000000000000000..f52fc7b1e8c8bd9610cd2d1b7ea32883e5e7d1b2
GIT binary patch
literal 834
zcmWIWW@Zs#U|`^2D4z2zg6ZGdDXV}ycSZ&VUIrP4+{C=hwAA7fy{zK=ywDI%2Ij08
z^U?yQ%u6e+;AUWCdBM!U04CP<o#ksX5NJ97NyOKGmPFNuW6T9+`xrDgO!Yi<DM!0a
z;(qME9{mTo#@3(D?%C9wc6+kk6uo>GpEc(<Ukl1%QA~XBv{bY}DbSIP-9OM$vMRL6
z);DX*nr$nr-t}DOk`xR)tnAC3JoSR!^2za+o&PA6YPLp56uT?Uwl+9_<LtD}=GNC^
zZf)>gxi7fq#`2X%i!RT+*L2oPcFyO7RclOS-B$g(w<)^Vpyb;>h5(?4xqx0|U|7B6
zeFT^RB{+Z{b_+^P%}dSG2m3WKXKI>0re6^zbOM8{ciV1(EkF}MSO{oBS!!NNeo=g8
zUP@+iYO!8bW&zl&Nx*OeVYF~VnDrCQHT)Q6K^*lB=%{Veu^7b2B*zT#7^YDYP%jEF
zymbUIQ5^|1n3aJUWH5&7SlK|z8G$eqNPB`fzz_skg)7lOtOBMVh9!+4)o4iwXb~t0
zVOWH4J!Z5ZyZ$54NJJz7O#?*|9@8+R2xc0{fyO|0qJ{+|!hq&tjVwrTFf%YS`~<qg
Im<i-T04p-%VgLXD

literal 0
HcmV?d00001

diff --git a/FReenen/0.2.0.ini b/FReenen/0.2.0.ini
new file mode 100644
index 0000000..8b43325
--- /dev/null
+++ b/FReenen/0.2.0.ini
@@ -0,0 +1,513 @@
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = FReenen
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.1.0
+config_update_url = https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/FReenen.ini
+
+########################################################################
+### Print Settings #####################################################
+########################################################################
+
+[print:*pringles*]
+# Layers and perimeters
+
+## Layers and perimeters - Layer height
+layer_height = 0.20
+first_layer_height = 0.2
+
+## Layers and perimeters - Vertical shells
+perimeters = 2
+spiral_vase = 0
+
+## Layers and perimeters - Horizontal shells
+top_solid_layers = 4
+bottom_solid_layers = 3
+top_solid_min_thickness = 0
+bottom_solid_min_thickness = 0
+
+## Layers and perimeters - Quality (slower slicing)
+extra_perimeters = 0
+extra_perimeters_on_overhangs = 0
+avoid_crossing_curled_overhangs = 1
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+thin_walls = 0
+thick_bridges = 1
+overhangs = 1
+
+## Layers and perimeters - Advanced
+seam_position = nearest
+staggered_inner_seams = 0
+external_perimeters_first = 0
+gap_fill_enabled = 1
+perimeter_generator = arachne
+
+## Layers and perimeters - Fuzzy skin
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+
+## Layers and perimeters - Only one perimeter
+top_one_perimeter_type = none
+only_one_perimeter_first_layer = 0
+
+# Infill
+
+## Infill - Infill
+fill_density = 15%
+fill_pattern = cubic
+infill_anchor = 600%
+infill_anchor_max = 50
+top_fill_pattern = monotonic
+bottom_fill_pattern = monotonic
+
+## Infill - Ironing
+ironing = 0
+ironing_type = top
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+
+## Infill - reduceing printing time
+infill_every_layers = 2
+
+## Infill - Advanced
+solid_infill_every_layers = 0
+fill_angle = 45
+solid_infill_below_area = 0
+bridge_angle = 0
+only_retract_when_crossing_perimeters = 0
+infill_first = 0
+
+# Skirts and brim
+
+## Skirts and brim - Skirt
+skirts = 1
+skirt_distance = 2
+skirt_height = 1
+draft_shield = disabled
+min_skirt_length = 4
+
+## Skirts and brim - Brim
+brim_type = outer_only
+brim_width = 0
+brim_separation = 0
+
+# Support material
+
+##  Support material - Support material
+support_material = 0
+support_material_auto = 1
+support_material_threshold = 45
+support_material_enforce_layers = 0
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+
+##  Support material - Raft
+raft_layers = 0
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+
+##  Support material - options for support material and raft
+support_material_style = grid
+support_material_contact_distance = 0.15
+support_material_bottom_contact_distance = 0
+support_material_pattern = rectilinear
+support_material_with_sheath = 0
+support_material_spacing = 2
+support_material_angle = 0
+support_material_closing_radius = 2
+support_material_interface_layers = 2
+support_material_bottom_interface_layers = -1
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_contact_loops = 0
+support_material_buildplate_only = 0
+support_material_xy_spacing = 60%
+dont_support_bridges = 1
+support_material_synchronize_layers = 0
+
+##  Support material - Organic supports
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_tip_diameter = 0.8
+support_tree_branch_distance = 1
+support_tree_top_rate = 15%
+
+# Speed
+
+## Speed - Speed for print moves
+perimeter_speed = 70
+small_perimeter_speed = 35
+external_perimeter_speed = 70
+infill_speed = 80
+solid_infill_speed = 80
+top_solid_infill_speed = 50
+support_material_speed = 60
+support_material_interface_speed = 100%
+bridge_speed = 30
+gap_fill_speed = 70
+ironing_speed = 15
+
+## Speed - Dynamic overhang speed
+enable_dynamic_overhang_speeds = 0
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+
+## Speed - Speed for non-print moves
+travel_speed = 150
+travel_speed_z = 5
+
+## Speed - Modifiers
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+
+## Speed - Acceleration control (advanced)
+external_perimeter_acceleration = 0
+perimeter_acceleration = 0
+top_solid_infill_acceleration = 0
+solid_infill_acceleration = 0
+infill_acceleration = 0
+bridge_acceleration = 0
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+wipe_tower_acceleration = 0
+travel_acceleration = 0
+default_acceleration = 0
+
+## Speed - Auto speed (advanced)
+max_print_speed = 100
+max_volumetric_speed = 14
+
+## Speed - Pressure equalizer
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+
+# Multiple Extruders
+
+## Multiple Extruders - Extruders
+perimeter_extruder = 1
+infill_extruder = 1
+solid_infill_extruder = 1
+support_material_extruder = 0
+support_material_interface_extruder = 0
+wipe_tower_extruder = 0
+
+## Multiple Extruders - Ooze prevention
+ooze_prevention = 0
+standby_temperature_delta = -5
+
+## Multiple Extruders - Wipe tower
+wipe_tower = 0
+wipe_tower_x = 10
+wipe_tower_y = 180
+wipe_tower_width = 30
+wipe_tower_rotation_angle = 0
+wipe_tower_brim_width = 2
+wipe_tower_bridging = 10
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extra_flow = 100%
+wipe_tower_no_sparse_layers = 0
+single_extruder_multi_material_priming = 0
+
+## Multiple Extruders - Advanced
+interface_shells = 0
+mmu_segmented_region_max_width = 0
+mmu_segmented_region_interlocking_depth = 0
+
+# Advanced
+
+## Advanced - Extrution with
+extrusion_width = 0.65
+first_layer_extrusion_width = 0.42
+perimeter_extrusion_width = 0
+external_perimeter_extrusion_width = 0
+infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0
+top_infill_extrusion_width = 0
+support_material_extrusion_width = 0.38
+
+## Advanced - overlap
+infill_overlap = 25%
+
+## Advanced - Flow
+bridge_flow_ratio = 0.95
+
+## Advanced - Slicing
+slice_closing_radius = 0.049
+slicing_mode = regular
+resolution = 0
+gcode_resolution = 0.0125
+arc_fitting = disabled
+xy_size_compensation = 0
+elefant_foot_compensation = 0.15
+
+## Advanced - Archne perimeter generator
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wall_distribution_count = 1
+min_bead_width = 85%
+min_feature_size = 25%
+
+# Output options
+
+## Output options - Sequential printing
+complete_objects = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+
+## Output options - Output file
+gcode_comments = 1
+gcode_label_objects = disabled
+output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
+
+## Output options - Other
+gcode_substitutions = 
+
+## Output options - post-processing scripts
+post_process = 
+
+# notes
+
+notes = 
+
+# Dependencies
+
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
+
+
+[print:0.10mm - nice @pringles]
+inherits = *pringles*
+layer_height = 0.1
+bottom_solid_layers = 4
+top_solid_layers = 6
+
+[print:0.20mm - default @pringles]
+inherits = *pringles*
+layer_height = 0.20
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.30mm - fast @pringles]
+inherits = *pringles*
+layer_height = 0.3
+bottom_solid_layers = 2
+top_solid_layers = 2
+
+[print:*speed boat@pringles*]
+inherits = *pringles*
+layer_height = 0.25
+bottom_solid_layers = 3
+top_solid_layers = 3
+perimeters = 2
+
+# extrution width
+external_perimeter_extrusion_width = 0.5
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.5
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+support_material_extrusion_width = 0.5
+top_infill_extrusion_width = 0.5
+
+
+
+
+
+########################################################################
+### Fillements #########################################################
+########################################################################
+
+[filament:PLA @pringles]
+filament_colour = #DDDDDD
+filament_diameter = 1.75
+extrusion_multiplier = 1
+filament_density = 1.24
+filament_cost = 25
+filament_spool_weight = 0
+
+idle_temperature = nil
+first_layer_temperature = 205
+temperature = 205
+first_layer_bed_temperature = 50
+bed_temperature = 50
+chamber_temperature = 0
+chamber_minimal_temperature = 0
+
+fan_always_on = 1
+cooling = 1
+
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+full_fan_speed_layer = 0
+
+enable_dynamic_fan_speeds = 0
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+
+fan_below_layer_time = 100
+slowdown_below_layer_time = 20
+min_print_speed = 15
+
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_deretract_speed = nil
+filament_infill_max_crossing_speed = 0
+filament_infill_max_speed = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 15
+filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_purge_multiplier = 100%
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_length_toolchange = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_shrinkage_compensation_xy = 0%
+filament_shrinkage_compensation_z = 0%
+filament_soluble = 0
+filament_stamping_distance = 0
+filament_stamping_loading_speed = 20
+filament_toolchange_delay = 0
+filament_travel_lift_before_obstacle = nil
+filament_travel_max_lift = nil
+filament_travel_ramping_lift = nil
+filament_travel_slope = nil
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Generic
+filament_wipe = nil
+inherits = Generic PLA @ELEGOO
+start_filament_gcode = "; Filament gcode\n"
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
+compatible_prints = 
+compatible_prints_condition = 
+
+
+
+########################################################################
+### Printers ###########################################################
+########################################################################
+
+[printer:pringles]
+inherits = 
+
+autoemit_temperature_commands = 1
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,220x0,220x220,0x220
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
+between_objects_gcode = 
+binary_gcode = 0
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "PLA @pringles"
+default_print_profile = 0.20mm - default @pringles
+deretract_speed = 70
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+extra_loading_move = -2
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+host_type = prusalink
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 3000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 300
+machine_max_feedrate_y = 300
+machine_max_feedrate_z = 5
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.35
+max_print_height = 250
+min_layer_height = 0.05
+multimaterial_purging = 140
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = 
+prefer_clockwise_movements = 0
+print_host = 
+printer_model = MODED-NEPTUNE2
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN\nPRINTER_PRINGELS
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = FReenen
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 0
+retract_length = 0.2
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 70
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z20 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+template_custom_gcode = 
+thumbnails = 
+thumbnails_format = 
+toolchange_gcode = 
+travel_lift_before_obstacle = 0
+travel_max_lift = 0
+travel_ramping_lift = 0
+travel_slope = 0
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+
diff --git a/PrusaSlicer_config_bundle.ini b/PrusaSlicer_config_bundle.ini
deleted file mode 100644
index 7be6883..0000000
--- a/PrusaSlicer_config_bundle.ini
+++ /dev/null
@@ -1,903 +0,0 @@
-# generated by PrusaSlicer 2.8.0 on 2024-07-15 at 15:53:49 UTC
-
-[print:0.10mm - nice @soldeer_pasta]
-arc_fitting = disabled
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 4
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-compatible_printers = 
-compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0.1
-enable_dynamic_overhang_speeds = 0
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 30
-gcode_comments = 1
-gcode_label_objects = disabled
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 50
-inherits = 0.16mm OPTIMAL @ELEGOO
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 4
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_one_perimeter_first_layer = 0
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 25
-solid_infill_acceleration = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.38
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 40
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-thick_bridges = 1
-thin_walls = 0
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0
-top_one_perimeter_type = none
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 30
-top_solid_layers = 5
-top_solid_min_thickness = 0
-travel_acceleration = 0
-travel_speed = 150
-travel_speed_z = 5
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_acceleration = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_flow = 100%
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm - default @soldeer_pasta]
-arc_fitting = disabled
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-compatible_printers = 
-compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0.1
-enable_dynamic_overhang_speeds = 0
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 30
-gcode_comments = 1
-gcode_label_objects = disabled
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 70
-inherits = 0.16mm OPTIMAL @ELEGOO
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 4
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_one_perimeter_first_layer = 0
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 30
-solid_infill_acceleration = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.38
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 70
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-thick_bridges = 1
-thin_walls = 0
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0
-top_one_perimeter_type = none
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 60
-top_solid_layers = 4
-top_solid_min_thickness = 0
-travel_acceleration = 0
-travel_speed = 150
-travel_speed_z = 5
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_acceleration = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_flow = 100%
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.30mm - fast @soldeer_pasta]
-arc_fitting = disabled
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 30
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-compatible_printers = 
-compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0.1
-enable_dynamic_overhang_speeds = 0
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 70
-external_perimeters_first = 0
-extra_perimeters = 0
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0.65
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 70
-gcode_comments = 1
-gcode_label_objects = disabled
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 0.16mm OPTIMAL @ELEGOO
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.3
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 4
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_one_perimeter_first_layer = 0
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 70
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 35
-solid_infill_acceleration = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 80
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.38
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-thick_bridges = 1
-thin_walls = 0
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0
-top_one_perimeter_type = none
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 50
-top_solid_layers = 2
-top_solid_min_thickness = 0
-travel_acceleration = 0
-travel_speed = 150
-travel_speed_z = 5
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_acceleration = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_flow = 100%
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:speed boat @soldeer_pasta]
-arc_fitting = disabled
-avoid_crossing_curled_overhangs = 0
-avoid_crossing_perimeters = 0
-avoid_crossing_perimeters_max_detour = 0
-bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
-bottom_solid_min_thickness = 0
-bridge_acceleration = 0
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 30
-brim_separation = 0
-brim_type = outer_only
-brim_width = 0
-compatible_printers = 
-compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-draft_shield = disabled
-elefant_foot_compensation = 0.1
-enable_dynamic_overhang_speeds = 0
-external_perimeter_acceleration = 0
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 70
-external_perimeters_first = 0
-extra_perimeters = 0
-extra_perimeters_on_overhangs = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
-extrusion_width = 0.5
-fill_angle = 45
-fill_density = 10%
-fill_pattern = cubic
-first_layer_acceleration = 0
-first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 20
-first_layer_speed_over_raft = 30
-fuzzy_skin = none
-fuzzy_skin_point_dist = 0.8
-fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 1
-gap_fill_speed = 70
-gcode_comments = 1
-gcode_label_objects = disabled
-gcode_resolution = 0.0125
-gcode_substitutions = 
-infill_acceleration = 0
-infill_anchor = 600%
-infill_anchor_max = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_overlap = 25%
-infill_speed = 80
-inherits = 0.16mm OPTIMAL @ELEGOO
-interface_shells = 0
-ironing = 0
-ironing_flowrate = 15%
-ironing_spacing = 0.1
-ironing_speed = 15
-ironing_type = top
-layer_height = 0.25
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_bead_width = 85%
-min_feature_size = 25%
-min_skirt_length = 4
-mmu_segmented_region_interlocking_depth = 0
-mmu_segmented_region_max_width = 0
-notes = 
-only_one_perimeter_first_layer = 0
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhang_speed_0 = 15
-overhang_speed_1 = 15
-overhang_speed_2 = 20
-overhang_speed_3 = 25
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_generator = arachne
-perimeter_speed = 70
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_contact_distance = 0.1
-raft_expansion = 1.5
-raft_first_layer_density = 90%
-raft_first_layer_expansion = 3
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 0
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-slice_closing_radius = 0.049
-slicing_mode = regular
-small_perimeter_speed = 35
-solid_infill_acceleration = 0
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 80
-spiral_vase = 0
-staggered_inner_seams = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_bottom_contact_distance = 0
-support_material_bottom_interface_layers = -1
-support_material_buildplate_only = 0
-support_material_closing_radius = 2
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.38
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_pattern = rectilinear
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_style = grid
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-support_tree_angle = 40
-support_tree_angle_slow = 25
-support_tree_branch_diameter = 2
-support_tree_branch_diameter_angle = 5
-support_tree_branch_diameter_double_wall = 3
-support_tree_branch_distance = 1
-support_tree_tip_diameter = 0.8
-support_tree_top_rate = 15%
-thick_bridges = 1
-thin_walls = 0
-top_fill_pattern = monotonic
-top_infill_extrusion_width = 0
-top_one_perimeter_type = none
-top_solid_infill_acceleration = 0
-top_solid_infill_speed = 40
-top_solid_layers = 3
-top_solid_min_thickness = 0
-travel_acceleration = 0
-travel_speed = 150
-travel_speed_z = 0
-wall_distribution_count = 1
-wall_transition_angle = 10
-wall_transition_filter_deviation = 25%
-wall_transition_length = 100%
-wipe_tower = 0
-wipe_tower_acceleration = 0
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_cone_angle = 0
-wipe_tower_extra_flow = 100%
-wipe_tower_extra_spacing = 100%
-wipe_tower_extruder = 0
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 170
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:PLA]
-bed_temperature = 50
-bridge_fan_speed = 100
-chamber_minimal_temperature = 0
-chamber_temperature = 0
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ELEGOO.*/
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-enable_dynamic_fan_speeds = 0
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #DDDDDD
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 20
-filament_density = 1.24
-filament_deretract_speed = nil
-filament_diameter = 1.75
-filament_infill_max_crossing_speed = 0
-filament_infill_max_speed = 0
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 15
-filament_minimal_purge_on_wipe_tower = 15
-filament_multitool_ramming = 0
-filament_multitool_ramming_flow = 10
-filament_multitool_ramming_volume = 10
-filament_notes = ""
-filament_purge_multiplier = 100%
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_length_toolchange = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_restart_extra_toolchange = nil
-filament_retract_speed = nil
-filament_settings_id = ""
-filament_shrinkage_compensation_xy = 0%
-filament_shrinkage_compensation_z = 0%
-filament_soluble = 0
-filament_spool_weight = 0
-filament_stamping_distance = 0
-filament_stamping_loading_speed = 20
-filament_toolchange_delay = 0
-filament_travel_lift_before_obstacle = nil
-filament_travel_max_lift = nil
-filament_travel_ramping_lift = nil
-filament_travel_slope = nil
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_vendor = Generic
-filament_wipe = nil
-first_layer_bed_temperature = 50
-first_layer_temperature = 205
-full_fan_speed_layer = 0
-idle_temperature = nil
-inherits = Generic PLA @ELEGOO
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-overhang_fan_speed_0 = 0
-overhang_fan_speed_1 = 0
-overhang_fan_speed_2 = 0
-overhang_fan_speed_3 = 0
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200
-
-[printer:pringles]
-autoemit_temperature_commands = 1
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,220x0,220x220,0x220
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
-between_objects_gcode = 
-binary_gcode = 0
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = "Generic PLA @ELEGOO"
-default_print_profile = 0.16mm OPTIMAL @ELEGOO
-deretract_speed = 70
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
-extra_loading_move = -2
-extruder_colour = #FCE94F
-extruder_offset = 0x0
-gcode_flavor = klipper
-high_current_on_filament_swap = 0
-host_type = prusalink
-inherits = Elegoo Neptune-2
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-machine_limits_usage = time_estimate_only
-machine_max_acceleration_e = 5000
-machine_max_acceleration_extruding = 500
-machine_max_acceleration_retracting = 1000
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 3000
-machine_max_acceleration_y = 3000
-machine_max_acceleration_z = 100
-machine_max_feedrate_e = 60
-machine_max_feedrate_x = 300
-machine_max_feedrate_y = 300
-machine_max_feedrate_z = 5
-machine_max_jerk_e = 5
-machine_max_jerk_x = 8
-machine_max_jerk_y = 8
-machine_max_jerk_z = 0.4
-machine_min_extruding_rate = 0
-machine_min_travel_rate = 0
-max_layer_height = 0.35
-max_print_height = 250
-min_layer_height = 0.05
-multimaterial_purging = 140
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = 
-prefer_clockwise_movements = 0
-print_host = 
-printer_model = NEPTUNE2
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 0.4
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 70%
-retract_layer_change = 0
-retract_length = 0.2
-retract_length_toolchange = 1
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 70
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z20 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
-template_custom_gcode = 
-thumbnails = 16x16/PNG, 220x124/PNG
-thumbnails_format = PNG
-toolchange_gcode = 
-travel_lift_before_obstacle = 0
-travel_max_lift = 0
-travel_ramping_lift = 0
-travel_slope = 0
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[presets]
-print = 0.30mm - fast @soldeer_pasta
-sla_print = 
-sla_material = 
-printer = pringles
-filament = PLA
-filament_1 = PLA
diff --git a/manifest.json b/manifest.json
new file mode 100644
index 0000000..3e9d062
--- /dev/null
+++ b/manifest.json
@@ -0,0 +1,8 @@
+{
+	"name": "FReenen",
+	"description": "Printer profiles from Finley van Reenen (FReenen)",
+	"visibility": "",
+	"id": "freenen",
+	"url": "https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/",
+	"offline_archive_url": "https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/FReenen.ini"
+}
\ No newline at end of file
diff --git a/vendor_indices.zip b/vendor_indices.zip
new file mode 100644
index 0000000000000000000000000000000000000000..cd8d83e15f9ae64af2de876bdebe399f2f3584e8
GIT binary patch
literal 180
zcmWIWW@h1H0D+%N-ba8LP=cR9hM_DqFD1VyJ~J;RGdZ<bKQx4sf%#j`)U<8W=cSca
za5FHnykKTv022Y;j7)OOxQvp38Y;l>))B<SFqjo$FovP5Y#`-~Ko|<7JwY4>0KLy7
ADF6Tf

literal 0
HcmV?d00001

diff --git a/vendor_indices/FReenen.idx b/vendor_indices/FReenen.idx
new file mode 100644
index 0000000..57a728a
--- /dev/null
+++ b/vendor_indices/FReenen.idx
@@ -0,0 +1,2 @@
+min_slic3r_version = 2.8.0
+0.2.0 update to vender profile
diff --git a/zip.sh b/zip.sh
new file mode 100644
index 0000000..5db20d3
--- /dev/null
+++ b/zip.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+rm vendor_indices.zip FReenen.zip
+
+zip vendor_indices.zip vendor_indices
+zip FReenen.zip manifest.json FReenen vendor_indices.zip