59 lines
2.1 KiB
Plaintext
59 lines
2.1 KiB
Plaintext
= DHT-11, DHT-22, and AM2302 Sensors
|
|
:xrefstyle: short
|
|
|
|
The DHT sensors are fairly well known hobbyist sensors for measuring relative humidity and temperature using a capacitive humidity sensor, and a thermistor. While they are slow, one reading every ~2 seconds, they are reliable and good for basic data logging. Communication is based on a custom protocol which uses a single wire for data.
|
|
|
|
[NOTE]
|
|
======
|
|
The DHT-11 and DHT-22 sensors are the most common. They use the same protocol but have different characteristics, the DHT-22 has better accuracy, and has a larger sensor range than the DHT-11. The sensor is available from a number of retailers.
|
|
======
|
|
|
|
== Wiring information
|
|
|
|
See <<dht-wiring-diagram>> for wiring instructions.
|
|
|
|
[[dht-wiring-diagram]]
|
|
[pdfwidth=75%]
|
|
.Wiring the DHT-22 temperature sensor to Raspberry Pi Pico, and connecting Pico's UART0 to the Raspberry Pi 4.
|
|
image::pi-and-pico-uart-and-dht-sensor.png[]
|
|
|
|
NOTE: One of the pins (pin 3) on the DHT sensor will not be connected, it is not used.
|
|
|
|
You will want to place a 10 kΩ resistor between VCC and the data pin, to act as a medium-strength pull up on the data line.
|
|
|
|
Connecting UART0 of Pico to Raspberry Pi as in <<dht-wiring-diagram>> and you should see something similar to <<dht-serial-output-diagram>> in `minicom` when connected to `/dev/serial0` on the Raspberry Pi.
|
|
|
|
[[dht-serial-output-diagram]]
|
|
[pdfwidth=75%]
|
|
.Serial output over Pico's UART0 in a terminal window.
|
|
image::serial-output.png[]
|
|
|
|
Connect to `/dev/serial0` by typing,
|
|
|
|
----
|
|
$ minicom -b 115200 -o -D /dev/serial0
|
|
----
|
|
|
|
at the command line.
|
|
|
|
== List of Files
|
|
|
|
A list of files with descriptions of their function;
|
|
|
|
CMakeLists.txt:: Make file to incorporate the example in to the examples build tree.
|
|
dht.c:: The example code.
|
|
|
|
== Bill of Materials
|
|
|
|
.A list of materials required for the example
|
|
[[dht-22-bom-table]]
|
|
[cols=3]
|
|
|===
|
|
| *Item* | *Quantity* | Details
|
|
| Breadboard | 1 | generic part
|
|
| Raspberry Pi Pico | 1 | http://raspberrypi.org/
|
|
| 10 kΩ resistor | 1 | generic part
|
|
| M/M Jumper wires | 4 | generic part
|
|
| DHT-22 sensor | 1 | generic part
|
|
|===
|