LailaTheElf/rp2040_projects
Archived
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update some of the SPI examples to use PICO_DEFAULT_SPI and binary_info

Browse Source
This commit is contained in:
Andrew Scheller 2021-03-04 11:53:48 +00:00 committed by Graham Sanderson
parent df23bb6ded
commit 188f5be9cf
5 changed files with 92 additions and 65 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
pio/spi/spi_flash.c
View File

@ -7,16 +7,12 @@
#include <stdio.h>
#include "pico/stdlib.h"
#include "pico/binary_info.h"
#include "pio_spi.h"
// This example uses PIO to erase, program and read back a SPI serial flash
// memory.
#define PIN_MISO 16
#define PIN_MOSI 17
#define PIN_SCK 18
#define PIN_CS 19
// ----------------------------------------------------------------------------
// Generic serial flash code
@ -102,17 +98,24 @@ void printbuf(const uint8_t buf[FLASH_PAGE_SIZE]) {
int main() {
stdio_init_all();
#if !defined(PICO_DEFAULT_SPI_SCK_PIN) || !defined(PICO_DEFAULT_SPI_TX_PIN) || !defined(PICO_DEFAULT_SPI_RX_PIN) || !defined(PICO_DEFAULT_SPI_CSN_PIN)
#warning pio/spi/spi_flash example requires a board with SPI pins
puts("Default SPI pins were not defined");
#else
puts("PIO SPI Example");
pio_spi_inst_t spi = {
.pio = pio0,
.sm = 0,
.cs_pin = PIN_CS
.cs_pin = PICO_DEFAULT_SPI_CSN_PIN
};
gpio_init(PIN_CS);
gpio_put(PIN_CS, 1);
gpio_set_dir(PIN_CS, GPIO_OUT);
gpio_init(PICO_DEFAULT_SPI_CSN_PIN);
gpio_put(PICO_DEFAULT_SPI_CSN_PIN, 1);
gpio_set_dir(PICO_DEFAULT_SPI_CSN_PIN, GPIO_OUT);
// Make the CS pin available to picotool
bi_decl(bi_1pin_with_name(PICO_DEFAULT_SPI_CSN_PIN, "CS"));
uint offset = pio_add_program(spi.pio, &spi_cpha0_program);
printf("Loaded program at %d\n", offset);
@ -122,10 +125,12 @@ int main() {
31.25f, // 1 MHz @ 125 clk_sys
false, // CPHA = 0
false, // CPOL = 0
PIN_SCK,
PIN_MOSI,
PIN_MISO
PICO_DEFAULT_SPI_SCK_PIN,
PICO_DEFAULT_SPI_TX_PIN,
PICO_DEFAULT_SPI_RX_PIN
);
// Make the SPI pins available to picotool
bi_decl(bi_3pins_with_func(PICO_DEFAULT_SPI_RX_PIN, PICO_DEFAULT_SPI_TX_PIN, PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_PIO0));
uint8_t page_buf[FLASH_PAGE_SIZE];
@ -152,4 +157,5 @@ int main() {
printbuf(page_buf);
return 0;
#endif
}

44
spi/bme280_spi/bme280_spi.c
View File

@ -7,6 +7,7 @@
#include <stdio.h>
#include <string.h>
#include "pico/stdlib.h"
#include "pico/binary_info.h"
#include "hardware/spi.h"
/* Example code to talk to a bme280 humidity/temperature/pressure sensor.
@ -36,12 +37,6 @@
https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
*/
#define PIN_MISO 16
#define PIN_CS 17
#define PIN_SCK 18
#define PIN_MOSI 19
#define SPI_PORT spi0
#define READ_BIT 0x80
int32_t t_fine;
@ -110,24 +105,27 @@ uint32_t compensate_humidity(int32_t adc_H) {
return (uint32_t) (v_x1_u32r >> 12);
}
#ifdef PICO_DEFAULT_SPI_CSN_PIN
static inline void cs_select() {
asm volatile("nop \n nop \n nop");
gpio_put(PIN_CS, 0); // Active low
gpio_put(PICO_DEFAULT_SPI_CSN_PIN, 0); // Active low
asm volatile("nop \n nop \n nop");
}
static inline void cs_deselect() {
asm volatile("nop \n nop \n nop");
gpio_put(PIN_CS, 1);
gpio_put(PICO_DEFAULT_SPI_CSN_PIN, 1);
asm volatile("nop \n nop \n nop");
}
#endif
#if defined(spi_default) && defined(PICO_DEFAULT_SPI_CSN_PIN)
static void write_register(uint8_t reg, uint8_t data) {
uint8_t buf[2];
buf[0] = reg & 0x7f; // remove read bit as this is a write
buf[1] = data;
cs_select();
spi_write_blocking(SPI_PORT, buf, 2);
spi_write_blocking(spi_default, buf, 2);
cs_deselect();
sleep_ms(10);
}
@ -138,9 +136,9 @@ static void read_registers(uint8_t reg, uint8_t *buf, uint16_t len) {
// so we don't need to keep sending the register we want, just the first.
reg |= READ_BIT;
cs_select();
spi_write_blocking(SPI_PORT, &reg, 1);
spi_write_blocking(spi_default, &reg, 1);
sleep_ms(10);
spi_read_blocking(SPI_PORT, 0, buf, len);
spi_read_blocking(spi_default, 0, buf, len);
cs_deselect();
sleep_ms(10);
}
@ -184,22 +182,31 @@ static void bme280_read_raw(int32_t *humidity, int32_t *pressure, int32_t *tempe
*temperature = ((uint32_t) buffer[3] << 12) | ((uint32_t) buffer[4] << 4) | (buffer[5] >> 4);
*humidity = (uint32_t) buffer[6] << 8 | buffer[7];
}
#endif
int main() {
stdio_init_all();
#if !defined(spi_default) || !defined(PICO_DEFAULT_SPI_SCK_PIN) || !defined(PICO_DEFAULT_SPI_TX_PIN) || !defined(PICO_DEFAULT_SPI_RX_PIN) || !defined(PICO_DEFAULT_SPI_CSN_PIN)
#warning spi/bme280_spi example requires a board with SPI pins
puts("Default SPI pins were not defined");
#else
printf("Hello, bme280! Reading raw data from registers via SPI...\n");
// This example will use SPI0 at 0.5MHz.
spi_init(SPI_PORT, 500 * 1000);
gpio_set_function(PIN_MISO, GPIO_FUNC_SPI);
gpio_set_function(PIN_SCK, GPIO_FUNC_SPI);
gpio_set_function(PIN_MOSI, GPIO_FUNC_SPI);
spi_init(spi_default, 500 * 1000);
gpio_set_function(PICO_DEFAULT_SPI_RX_PIN, GPIO_FUNC_SPI);
gpio_set_function(PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_SPI);
gpio_set_function(PICO_DEFAULT_SPI_TX_PIN, GPIO_FUNC_SPI);
// Make the SPI pins available to picotool
bi_decl(bi_3pins_with_func(PICO_DEFAULT_SPI_RX_PIN, PICO_DEFAULT_SPI_TX_PIN, PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_SPI));
// Chip select is active-low, so we'll initialise it to a driven-high state
gpio_init(PIN_CS);
gpio_set_dir(PIN_CS, GPIO_OUT);
gpio_put(PIN_CS, 1);
gpio_init(PICO_DEFAULT_SPI_CSN_PIN);
gpio_set_dir(PICO_DEFAULT_SPI_CSN_PIN, GPIO_OUT);
gpio_put(PICO_DEFAULT_SPI_CSN_PIN, 1);
// Make the CS pin available to picotool
bi_decl(bi_1pin_with_name(PICO_DEFAULT_SPI_CSN_PIN, "CS"));
// See if SPI is working - interrograte the device for its I2C ID number, should be 0x60
uint8_t id;
@ -230,4 +237,5 @@ int main() {
}
return 0;
#endif
}

5
spi/mpu9250_spi/mpu9250_spi.c
View File

@ -7,6 +7,7 @@
#include <stdio.h>
#include <string.h>
#include "pico/stdlib.h"
#include "pico/binary_info.h"
#include "hardware/spi.h"
/* Example code to talk to a MPU9250 MEMS accelerometer and gyroscope.
@ -117,11 +118,15 @@ int main() {
gpio_set_function(PIN_MISO, GPIO_FUNC_SPI);
gpio_set_function(PIN_SCK, GPIO_FUNC_SPI);
gpio_set_function(PIN_MOSI, GPIO_FUNC_SPI);
// Make the SPI pins available to picotool
bi_decl(bi_3pins_with_func(PIN_MISO, PIN_MOSI, PIN_SCK, GPIO_FUNC_SPI));
// Chip select is active-low, so we'll initialise it to a driven-high state
gpio_init(PIN_CS);
gpio_set_dir(PIN_CS, GPIO_OUT);
gpio_put(PIN_CS, 1);
// Make the CS pin available to picotool
bi_decl(bi_1pin_with_name(PIN_CS, "CS"));
mpu9250_reset();

37
spi/spi_dma/spi_dma.c
View File

@ -9,37 +9,39 @@
#include <stdio.h>
#include <stdlib.h>
#include "pico/stdlib.h"
#include "pico/binary_info.h"
#include "hardware/spi.h"
#include "hardware/dma.h"
#define PIN_MISO 16
#define PIN_CS 17
#define PIN_SCK 18
#define PIN_MOSI 19
#define SPI_INST spi0
#define TEST_SIZE 1024
int main() {
// Enable UART so we can print status output
stdio_init_all();
#if !defined(spi_default) || !defined(PICO_DEFAULT_SPI_SCK_PIN) || !defined(PICO_DEFAULT_SPI_TX_PIN) || !defined(PICO_DEFAULT_SPI_RX_PIN) || !defined(PICO_DEFAULT_SPI_CSN_PIN)
#warning spi/spi_dma example requires a board with SPI pins
puts("Default SPI pins were not defined");
#else
printf("SPI DMA example\n");
// Enable SPI at 1 MHz and connect to GPIOs
spi_init(SPI_INST, 1000 * 1000);
gpio_set_function(PIN_MISO, GPIO_FUNC_SPI);
gpio_init(PIN_CS);
gpio_set_function(PIN_SCK, GPIO_FUNC_SPI);
gpio_set_function(PIN_MOSI, GPIO_FUNC_SPI);
spi_init(spi_default, 1000 * 1000);
gpio_set_function(PICO_DEFAULT_SPI_RX_PIN, GPIO_FUNC_SPI);
gpio_init(PICO_DEFAULT_SPI_CSN_PIN);
gpio_set_function(PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_SPI);
gpio_set_function(PICO_DEFAULT_SPI_TX_PIN, GPIO_FUNC_SPI);
// Make the SPI pins available to picotool
bi_decl(bi_3pins_with_func(PICO_DEFAULT_SPI_RX_PIN, PICO_DEFAULT_SPI_TX_PIN, PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_SPI));
// Make the CS pin available to picotool
bi_decl(bi_1pin_with_name(PICO_DEFAULT_SPI_CSN_PIN, "CS"));
// Grab some unused dma channels
const uint dma_tx = dma_claim_unused_channel(true);
const uint dma_rx = dma_claim_unused_channel(true);
// Force loopback for testing (I don't have an SPI device handy)
hw_set_bits(&spi_get_hw(SPI_INST)->cr1, SPI_SSPCR1_LBM_BITS);
hw_set_bits(&spi_get_hw(spi_default)->cr1, SPI_SSPCR1_LBM_BITS);
static uint8_t txbuf[TEST_SIZE];
static uint8_t rxbuf[TEST_SIZE];
@ -54,9 +56,9 @@ int main() {
printf("Configure TX DMA\n");
dma_channel_config c = dma_channel_get_default_config(dma_tx);
channel_config_set_transfer_data_size(&c, DMA_SIZE_8);
channel_config_set_dreq(&c, spi_get_index(SPI_INST) ? DREQ_SPI1_TX : DREQ_SPI0_TX);
channel_config_set_dreq(&c, spi_get_index(spi_default) ? DREQ_SPI1_TX : DREQ_SPI0_TX);
dma_channel_configure(dma_tx, &c,
&spi_get_hw(SPI_INST)->dr, // write address
&spi_get_hw(spi_default)->dr, // write address
txbuf, // read address
TEST_SIZE, // element count (each element is of size transfer_data_size)
false); // don't start yet
@ -68,12 +70,12 @@ int main() {
// address to increment (so data is written throughout the buffer)
c = dma_channel_get_default_config(dma_rx);
channel_config_set_transfer_data_size(&c, DMA_SIZE_8);
channel_config_set_dreq(&c, spi_get_index(SPI_INST) ? DREQ_SPI1_RX : DREQ_SPI0_RX);
channel_config_set_dreq(&c, spi_get_index(spi_default) ? DREQ_SPI1_RX : DREQ_SPI0_RX);
channel_config_set_read_increment(&c, false);
channel_config_set_write_increment(&c, true);
dma_channel_configure(dma_rx, &c,
rxbuf, // write address
&spi_get_hw(SPI_INST)->dr, // read address
&spi_get_hw(spi_default)->dr, // read address
TEST_SIZE, // element count (each element is of size transfer_data_size)
false); // don't start yet
@ -100,4 +102,5 @@ int main() {
dma_channel_unclaim(dma_tx);
dma_channel_unclaim(dma_rx);
return 0;
#endif
}

41
spi/spi_flash/spi_flash.c
View File

@ -8,6 +8,7 @@
#include <stdio.h>
#include "pico/stdlib.h"
#include "pico/binary_info.h"
#include "hardware/spi.h"
#define FLASH_PAGE_SIZE 256
@ -21,11 +22,6 @@
#define FLASH_STATUS_BUSY_MASK 0x01
#define PIN_MISO 4
#define PIN_CS 5
#define PIN_SCK 6
#define PIN_MOSI 7
static inline void cs_select(uint cs_pin) {
asm volatile("nop \n nop \n nop"); // FIXME
gpio_put(cs_pin, 0);
@ -110,19 +106,27 @@ void printbuf(uint8_t buf[FLASH_PAGE_SIZE]) {
int main() {
// Enable UART so we can print status output
stdio_init_all();
#if !defined(spi_default) || !defined(PICO_DEFAULT_SPI_SCK_PIN) || !defined(PICO_DEFAULT_SPI_TX_PIN) || !defined(PICO_DEFAULT_SPI_RX_PIN) || !defined(PICO_DEFAULT_SPI_CSN_PIN)
#warning spi/spi_flash example requires a board with SPI pins
puts("Default SPI pins were not defined");
#else
printf("SPI flash example\n");
// Enable SPI 0 at 1 MHz and connect to GPIOs
spi_init(spi0, 1000 * 1000);
gpio_set_function(PIN_MISO, GPIO_FUNC_SPI);
gpio_set_function(PIN_SCK, GPIO_FUNC_SPI);
gpio_set_function(PIN_MOSI, GPIO_FUNC_SPI);
spi_init(spi_default, 1000 * 1000);
gpio_set_function(PICO_DEFAULT_SPI_RX_PIN, GPIO_FUNC_SPI);
gpio_set_function(PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_SPI);
gpio_set_function(PICO_DEFAULT_SPI_TX_PIN, GPIO_FUNC_SPI);
// Make the SPI pins available to picotool
bi_decl(bi_3pins_with_func(PICO_DEFAULT_SPI_RX_PIN, PICO_DEFAULT_SPI_TX_PIN, PICO_DEFAULT_SPI_SCK_PIN, GPIO_FUNC_SPI));
// Chip select is active-low, so we'll initialise it to a driven-high state
gpio_init(PIN_CS);
gpio_put(PIN_CS, 1);
gpio_set_dir(PIN_CS, GPIO_OUT);
gpio_init(PICO_DEFAULT_SPI_CSN_PIN);
gpio_put(PICO_DEFAULT_SPI_CSN_PIN, 1);
gpio_set_dir(PICO_DEFAULT_SPI_CSN_PIN, GPIO_OUT);
// Make the CS pin available to picotool
bi_decl(bi_1pin_with_name(PICO_DEFAULT_SPI_CSN_PIN, "CS"));
printf("SPI initialised, let's goooooo\n");
@ -130,25 +134,26 @@ int main() {
const uint32_t target_addr = 0;
flash_sector_erase(spi0, PIN_CS, target_addr);
flash_read(spi0, PIN_CS, target_addr, page_buf, FLASH_PAGE_SIZE);
flash_sector_erase(spi_default, PICO_DEFAULT_SPI_CSN_PIN, target_addr);
flash_read(spi_default, PICO_DEFAULT_SPI_CSN_PIN, target_addr, page_buf, FLASH_PAGE_SIZE);
printf("After erase:\n");
printbuf(page_buf);
for (int i = 0; i < FLASH_PAGE_SIZE; ++i)
page_buf[i] = i;
flash_page_program(spi0, PIN_CS, target_addr, page_buf);
flash_read(spi0, PIN_CS, target_addr, page_buf, FLASH_PAGE_SIZE);
flash_page_program(spi_default, PICO_DEFAULT_SPI_CSN_PIN, target_addr, page_buf);
flash_read(spi_default, PICO_DEFAULT_SPI_CSN_PIN, target_addr, page_buf, FLASH_PAGE_SIZE);
printf("After program:\n");
printbuf(page_buf);
flash_sector_erase(spi0, PIN_CS, target_addr);
flash_read(spi0, PIN_CS, target_addr, page_buf, FLASH_PAGE_SIZE);
flash_sector_erase(spi_default, PICO_DEFAULT_SPI_CSN_PIN, target_addr);
flash_read(spi_default, PICO_DEFAULT_SPI_CSN_PIN, target_addr, page_buf, FLASH_PAGE_SIZE);
printf("Erase again:\n");
printbuf(page_buf);
return 0;
#endif
}