Compatible CMSIS-DAP debug probes

Raspberry Pi Pico

You can use a second Pico as your debugger.

Download this file: https://github.com/majbthrd/DapperMime/releases/download/20210225/raspberry_pi_pico-DapperMime.uf2
Boot the Pico in bootloader mode by holding the bootset button while plugging it in
Open the drive RPI-RP2 when prompted
Copy raspberry_pi_pico-DapperMime.uf2 from Downloads into RPI-RP2
Connect the debug pins of your CMSIS-DAP pico to the target one

WeAct MiniF4

https://therealprof.github.io/blog/usb-c-pill-part1/

HS-Probe

https://github.com/probe-rs/hs-probe

ST-LINK v2 clone

It's getting harder to source these with stm32f103's as time goes on, so you might be better off choosing a stm32f103 dev board

Firmware: https://github.com/devanlai/dap42

LPC-Link2

https://www.nxp.com/design/microcontrollers-developer-resources/lpc-link2:OM13054

MCU-Link

https://www.nxp.com/part/MCU-LINK#/

DAPLink

You can use DAPLink firmware with any of it's supported chips (LPC4322, LPC11U35, K20, K22, KL26). You'll need to use the 'develop' branch to use GCC to build it. You'll need to find a chip with the correct

Firmware source: https://github.com/ARMmbed/DAPLink/tree/develop

1.2 KiB Raw Blame History