From 061d76af3df629affe90fc764e6e01c30e9617af Mon Sep 17 00:00:00 2001 From: Jonathan Pallant Date: Mon, 18 Oct 2021 10:37:51 +0100 Subject: [PATCH] Specify pinouts for RP2040 based probe --- debug_probes.md | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/debug_probes.md b/debug_probes.md index 0e87fea..04092ef 100644 --- a/debug_probes.md +++ b/debug_probes.md @@ -8,7 +8,10 @@ - Boot the Pico in bootloader mode by holding the bootset button while plugging it in - Open the drive RPI-RP2 when prompted - Copy raspberry_pi_pico-DapperMime.uf2 from Downloads into RPI-RP2 - - Connect the debug pins of your CMSIS-DAP pico to the target one + - Connect the debug pins of your CMSIS-DAP Pico to the target one + - Connect GP2 on the Probe to SWCLK on the Target + - Connect GP3 on the Probe to SWDIO on the Target + - Connect a ground line from the CMSIS-DAP Probe to the Target too ## WeAct MiniF4 https://therealprof.github.io/blog/usb-c-pill-part1/ @@ -30,4 +33,4 @@ https://www.nxp.com/part/MCU-LINK#/ ## DAPLink You can use DAPLink firmware with any of it's supported chips (LPC4322, LPC11U35, K20, K22, KL26). You'll need to use the 'develop' branch to use GCC to build it. You'll need to find a chip with the correct -Firmware source: https://github.com/ARMmbed/DAPLink/tree/develop \ No newline at end of file +Firmware source: https://github.com/ARMmbed/DAPLink/tree/develop