34 lines
1.3 KiB
C
34 lines
1.3 KiB
C
// Copyright 2023 Moritz Plattner (@ebastler), Alex Havermale (@haversnail)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
/* Defines for configuring the serial driver for split comms (see https://docs.qmk.fm/drivers/serial) */
|
|
#define SERIAL_USART_DRIVER SD3 // USART 3
|
|
|
|
/* Defines for required pins */
|
|
#define ID_PIN A13
|
|
#define USBSW_PIN A14 // Switches the hub input/output with the MUXes
|
|
#define PSW_PIN A15 // Turns the power routing to the USB-C port on/off
|
|
#define BUS_B_PIN C13 // Tells the hub to be bus-powered or self-powered (which in turn tells the clients to use 100 mA or 500 mA)
|
|
#define USB_VBUS_PIN C15 // Only the master side will have VBUS present at power-up (used to determine master/slave)
|
|
#define USBPD_1_PIN F0
|
|
#define USBPD_2_PIN F1
|
|
|
|
/* Additional defines for managing power and state scross split */
|
|
#define DISABLE_BUS_POWER_MODE TRUE
|
|
#define KB_STATE_SYNC_INTERVAL 500
|
|
#define USBPD_ALLOWANCE_CHECK_INTERVAL 100
|
|
#define SPLIT_TRANSACTION_IDS_KB RPC_ID_KB_STATE
|
|
|
|
/* Defines for the RGB matrix */
|
|
#define INDICATOR_MAX_BRIGHTNESS 255
|
|
#define CAPS_LOCK_LED_INDEX 0 // LED1 on PCB
|
|
#define WS2812_EXTERNAL_PULLUP
|
|
#define WS2812_PWM_DRIVER PWMD3
|
|
#define WS2812_PWM_CHANNEL 4
|
|
#define WS2812_PWM_PAL_MODE 10
|
|
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
|
|
#define WS2812_DMA_CHANNEL 2
|
|
#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM3_UP
|