Refactor to use led config - Part 6 (#12115)

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes

keyboards/ares/ares.c

@@ -16,19 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "ares.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/ares/config.h

@@ -37,6 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/bfake/bfake.c

@@ -16,19 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bfake.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/bfake/config.h

@@ -37,6 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/chili/chili.c

@@ -14,29 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "chili.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    led_init_ports();
-    matrix_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B1);
-    writePinHigh(B1);
-    setPinOutput(B2);
-    writePinHigh(B2);
-    setPinOutput(B3);
-    writePinHigh(B3);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        writePin(B1, !led_state.num_lock);
-        writePin(B2, !led_state.caps_lock);
-        writePin(B3, !led_state.scroll_lock);
-    }
-    return res;
-}

keyboards/chili/config.h

@@ -42,6 +42,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN B1
+#define LED_CAPS_LOCK_PIN B2
+#define LED_SCROLL_LOCK_PIN B3
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3

keyboards/coarse/cordillera/config.h

@@ -32,6 +32,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { B15, B14, B13, B12, B11, B10, B2, B1, B8, B7, B6, B5, B4, B3, A15, A14 }
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN B0
+#define LED_CAPS_LOCK_PIN A1
+#define LED_SCROLL_LOCK_PIN A0
+
 #define BACKLIGHT_PIN           A8
 #define BACKLIGHT_PWM_DRIVER    PWMD1
 #define BACKLIGHT_PWM_CHANNEL   1

keyboards/coarse/cordillera/cordillera.c

@@ -16,23 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "cordillera.h"
-
-void keyboard_pre_init_kb(void) {
-	led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B0);
-    setPinOutput(A1);
-    setPinOutput(A0);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(B0, led_state.num_lock);
-        writePin(A1, led_state.caps_lock);
-        writePin(A0, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/crazy_keyboard_68/config.h

@@ -52,6 +52,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
 
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 //#define BACKLIGHT_PIN B7
 //#define BACKLIGHT_LEVELS 3
 //#define BACKLIGHT_BREATHING

keyboards/crazy_keyboard_68/crazy_keyboard_68.c

@@ -15,22 +15,3 @@
  */
 
 #include "crazy_keyboard_68.h"
-
-void matrix_init_kb(void) {
-	led_init_ports();
-	
-	matrix_init_user();
-}
-
-void led_init_ports(void) {
-    // Caps lock pin
-    setPinOutput(B0);
-    writePinHigh(B0);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B0, !led_state.caps_lock);
-    }
-    return true;
-}

keyboards/daisy/config.h

@@ -52,6 +52,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
 
+#define LED_CAPS_LOCK_PIN C6
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN D0
 // #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 6

keyboards/daisy/daisy.c

@@ -15,21 +15,3 @@
  */
 
 #include "daisy.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(C6);
-    writePinHigh(C6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(C6, !led_state.caps_lock);
-    }
-
-    return true;
-}

keyboards/do60/config.h

@@ -45,6 +45,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, F4, B4, D7, D6, B3, B0 }
 #define UNUSED_PINS
 
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 /* Backlight Setup */
 #define BACKLIGHT_PIN B5
 #define BACKLIGHT_LEVELS 6

keyboards/do60/do60.c

@@ -2,26 +2,9 @@
 
 extern inline void setdefaultrgb(void);
 
-
 void matrix_init_kb(void) {
   // Keyboard start-up code goes here
   // Runs once when the firmware starts up
   matrix_init_user();
-  led_init_ports();
   setdefaultrgb();
 };
-
-void led_init_ports(void) {
-  // Set caps lock LED pin as output
-  setPinOutput(B2);
-  // Default to off
-  writePinHigh(B2);
-}
-
-bool led_update_kb(led_t led_state) {
-  if(led_update_user(led_state)) {
-    writePin(B2, !led_state.caps_lock);
-  }
-
-  return true;
-}

keyboards/donutcables/budget96/budget96.c

@@ -15,21 +15,3 @@
  */
 
 #include "budget96.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/donutcables/budget96/config.h

@@ -37,6 +37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/eve/meteor/config.h

@@ -36,5 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3

keyboards/eve/meteor/meteor.c

@@ -15,19 +15,3 @@
  */
 
 #include "meteor.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/evyd13/eon75/config.h

@@ -51,6 +51,11 @@
  */
 // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_NUM_LOCK_PIN B7
+#define LED_CAPS_LOCK_PIN D5
+#define LED_SCROLL_LOCK_PIN B0
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/eon75/eon75.c

@@ -14,32 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "eon75.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-    led_init_ports();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output and high
-    setPinOutput(D5);
-    writePinHigh(D5);
-    
-    setPinOutput(B7);
-    writePinHigh(B7);
-    
-    setPinOutput(B0);
-    writePinHigh(B0);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(D5, !led_state.caps_lock);
-        writePin(B7, !led_state.num_lock);
-        writePin(B0, !led_state.scroll_lock);
-    }
-
-    return true;
-}

keyboards/evyd13/eon95/config.h

@@ -51,6 +51,11 @@
  */
 // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_NUM_LOCK_PIN B7
+#define LED_CAPS_LOCK_PIN D5
+#define LED_SCROLL_LOCK_PIN B0
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/eon95/eon95.c

@@ -14,32 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "eon95.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    // * Set our LED pins as output and high
-    setPinOutput(D5);
-    writePinHigh(D5);
-    
-    setPinOutput(B7);
-    writePinHigh(B7);
-    
-    setPinOutput(B0);
-    writePinHigh(B0);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(D5, !led_state.caps_lock);
-        writePin(B7, !led_state.num_lock);
-        writePin(B0, !led_state.scroll_lock);
-    }
-
-    return true;
-}

keyboards/evyd13/gh80_1800/config.h

@@ -51,6 +51,11 @@
  */
 // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_NUM_LOCK_PIN D6
+#define LED_CAPS_LOCK_PIN D7
+#define LED_SCROLL_LOCK_PIN D4
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/gh80_1800/gh80_1800.c

@@ -14,31 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "gh80_1800.h"
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-  led_init_ports();
-}
-
-void led_init_ports(void) {
-  setPinOutput(D6);
-  setPinOutput(D7);
-  setPinOutput(D4);
-  
-  writePinHigh(D6);
-  writePinHigh(D7);
-  writePinHigh(D4);
-}
-
-bool led_update_kb(led_t led_state) {
-  if(led_update_user(led_state)) {
-    writePin(D6, !led_state.num_lock);
-    writePin(D7, !led_state.caps_lock);
-    writePin(D4, !led_state.scroll_lock);
-  }
-
-  return true;
-}

keyboards/evyd13/minitomic/config.h

@@ -51,6 +51,9 @@
  */
 // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_CAPS_LOCK_PIN C7
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/minitomic/minitomic.c

@@ -14,37 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "minitomic.h"
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-void led_init_ports(void) {
-	//Set led pin as output, then high (off)
-    writePinHigh(C7);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        // writePin sets the pin high for 1 and low for 0.
-        // In this example the pins are inverted, setting
-        // it low/0 turns it on, and high/1 turns the LED off.
-        // This behavior depends on whether the LED is between the pin
-        // and VCC or the pin and GND.
-        writePin(C7, !led_state.caps_lock);
-    }
-    return res;
-}
-

keyboards/evyd13/mx5160/config.h

@@ -55,6 +55,11 @@
  */
 // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_NUM_LOCK_PIN B2
+#define LED_CAPS_LOCK_PIN B1
+#define LED_SCROLL_LOCK_PIN B3
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/mx5160/mx5160.c

@@ -14,45 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "mx5160.h"
-
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-  led_init_ports();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-void led_init_ports(void) {
-	//Set led pin as output, then high (off)
-	
-	//Caps lock
-    setPinOutput(B1);
-    writePinHigh(B1);
-	
-	//Num lock
-    setPinOutput(B2);
-    writePinHigh(B2);
-	
-	//Scroll lock
-    setPinOutput(B3);
-    writePinHigh(B3);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if (res) {
-        writePin(B2, !led_state.num_lock);
-        writePin(B1, !led_state.caps_lock);
-        writePin(B3, !led_state.scroll_lock);
-    }
-    return res;
-}

keyboards/evyd13/nt660/config.h

@@ -53,6 +53,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 // #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
 
+#define LED_CAPS_LOCK_PIN D0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/nt660/nt660.c

@@ -14,19 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "nt660.h"
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(D0, !led_state.caps_lock);
-    }
-
-    return true;
-}

keyboards/evyd13/quackfire/config.h

@@ -52,6 +52,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_CAPS_LOCK_PIN F7
+#define LED_SCROLL_LOCK_PIN F6
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 5

keyboards/evyd13/quackfire/quackfire.c

@@ -14,31 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "quackfire.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(F6);
-    setPinOutput(F7);
-    writePinHigh(F6);
-    writePinHigh(F7);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(F7, !led_state.caps_lock);
-        writePin(F6, !led_state.scroll_lock);
-    }
-
-    return true;
-}

keyboards/evyd13/wasdat/config.h

@@ -57,6 +57,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_NUM_LOCK_PIN B2
+#define LED_CAPS_LOCK_PIN B0
+#define LED_SCROLL_LOCK_PIN B1
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/evyd13/wasdat/wasdat.c

@@ -14,34 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "wasdat.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B0);
-    writePinHigh(B0);
-    setPinOutput(B1);
-    writePinHigh(B1);
-    setPinOutput(B2);
-    writePinHigh(B2);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B0, !led_state.caps_lock);
-        writePin(B1, !led_state.scroll_lock);
-        writePin(B2, !led_state.num_lock);
-    }
-
-    return true;
-}

keyboards/evyd13/wasdat_code/config.h

@@ -57,6 +57,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
+#define LED_NUM_LOCK_PIN B3
+#define LED_CAPS_LOCK_PIN B1
+#define LED_SCROLL_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5

keyboards/evyd13/wasdat_code/wasdat_code.c

@@ -14,34 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "wasdat_code.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B1);
-    setPinOutput(B2);
-    setPinOutput(B3);
-    writePinHigh(B1);
-    writePinHigh(B2);
-    writePinHigh(B3);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B1, !led_state.caps_lock);
-        writePin(B2, !led_state.scroll_lock);
-        writePin(B3, !led_state.num_lock);
-    }
-
-    return true;
-}

keyboards/evyd13/wonderland/config.h

@@ -43,6 +43,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
+#define LED_NUM_LOCK_PIN B1
+#define LED_CAPS_LOCK_PIN B2
+#define LED_SCROLL_LOCK_PIN B3
+#define LED_PIN_ON_STATE 0
+
 /* Backlight configuration
  */
 #define RGB_DI_PIN B7

keyboards/evyd13/wonderland/wonderland.c

@@ -1,34 +1 @@
 #include "wonderland.h"
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-__attribute__ ((weak))
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    setPinOutput(B1);
-    setPinOutput(B2);
-    setPinOutput(B3);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool runDefault = led_update_user(led_state);
-    if (runDefault) {
-      writePin(B1, !led_state.num_lock);
-      writePin(B2, !led_state.caps_lock);
-      writePin(B3, !led_state.scroll_lock);
-    }
-    return runDefault;
-}

keyboards/exclusive/e65/config.h

@@ -39,6 +39,9 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B6
+#define LED_PIN_ON_STATE 0
+
 /* number of backlight levels */
 #define BACKLIGHT_PIN B7
 #ifdef BACKLIGHT_PIN

keyboards/exclusive/e65/e65.c

@@ -15,24 +15,3 @@
  */
 
 #include "e65.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B6);
-    writePinHigh(B6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B6, !led_state.caps_lock);
-    }
-
-    return true;
-}

keyboards/exclusive/e6v2/le_bmc/config.h

@@ -44,6 +44,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/exclusive/e6v2/le_bmc/le_bmc.c

@@ -15,19 +15,3 @@
  */
 
 #include "le_bmc.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/exclusive/e6v2/oe_bmc/config.h

@@ -44,6 +44,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c

@@ -15,19 +15,3 @@
  */
 
 #include "oe_bmc.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/exent/config.h

@@ -38,6 +38,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+#define LED_SCROLL_LOCK_PIN D6
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/exent/exent.c

@@ -15,23 +15,3 @@
  */
 
 #include "exent.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-        writePin(D6, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/facew/config.h

@@ -37,6 +37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/facew/facew.c

@@ -16,21 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "facew.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/foxlab/key65/hotswap/config.h

@@ -45,6 +45,9 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_SCROLL_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5

keyboards/foxlab/key65/hotswap/hotswap.c

@@ -15,20 +15,3 @@
  */
 
 #include "hotswap.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(E6);
-    writePinHigh(E6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(E6, !led_state.caps_lock);
-    }
-    return true;
-}

keyboards/foxlab/key65/universal/config.h

@@ -45,6 +45,9 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_SCROLL_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5

keyboards/foxlab/key65/universal/universal.c

@@ -15,20 +15,3 @@
  */
 
 #include "universal.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(E6);
-    writePinHigh(E6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(E6, !led_state.caps_lock);
-    }
-    return true;
-}

keyboards/freyr/config.h

@@ -47,6 +47,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B3
+#define LED_SCROLL_LOCK_PIN B7
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING

keyboards/freyr/freyr.c

@@ -15,22 +15,3 @@
  */
 
 #include "freyr.h"
-
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B3);
-    setPinOutput(B7);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(B3, !led_state.caps_lock);
-        writePin(B7, !led_state.scroll_lock);
-    }
-
-    return true;
-}

keyboards/ft/mars80/config.h

@@ -37,6 +37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_CAPS_LOCK_PIN D1
+#define LED_SCROLL_LOCK_PIN D6
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/ft/mars80/mars80.c

@@ -15,21 +15,3 @@
  */
 
 #include "mars80.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-    setPinOutput(D6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-        writePin(D6, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/gray_studio/hb85/config.h

@@ -34,5 +34,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 5
 #define RGBLIGHT_ANIMATIONS
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+#define LED_SCROLL_LOCK_PIN D6
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3

keyboards/gray_studio/hb85/hb85.c

@@ -17,23 +17,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "hb85.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-        writePin(D6, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/handwired/tritium_numpad/config.h

@@ -36,6 +36,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F6, B1, B2 }
 #define UNUSED_PINS
 
+#define LED_NUM_LOCK_PIN D5
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B6
 
 /* COL2ROW or ROW2COL */

keyboards/handwired/tritium_numpad/tritium_numpad.c

@@ -1,29 +1 @@
 #include "tritium_numpad.h"
-#include "led.h"
-
-void keyboard_pre_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	keyboard_pre_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    // Numlock LED
-    setPinOutput(D5);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinLow(D5);
-    } else {
-        writePinHigh(D5);
-    }
-}

keyboards/hid_liber/config.h

@@ -34,6 +34,10 @@
 // HID Liberation Device uses custom matrix code to accomodate a 74HC238 3 to 8 decoder on pins B1, B2 and B3.
 //#define DIODE_DIRECTION
 
+#define LED_CAPS_LOCK_PIN B5
+#define LED_SCROLL_LOCK_PIN B6
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/hid_liber/hid_liber.c

@@ -16,24 +16,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "hid_liber.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    led_init_ports();
-    matrix_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B5);
-    setPinOutput(B6);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        writePin(B5, !led_state.caps_lock);
-        writePin(B6, !led_state.scroll_lock);
-    }
-    return res;
-}

keyboards/j80/config.h

@@ -35,6 +35,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+#define LED_SCROLL_LOCK_PIN D6
+
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_PIN D4
 

keyboards/j80/j80.c

@@ -15,23 +15,3 @@
  */
 
 #include "j80.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-        writePin(D6, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/jc65/v32a/config.h

@@ -32,6 +32,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/jc65/v32a/v32a.c

@@ -16,19 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "v32a.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/kb_elmo/aek2_usb/aek2_usb.c

@@ -15,23 +15,3 @@
  */
 
 #include "aek2_usb.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B0);
-    setPinOutput(B1);
-    setPinOutput(B2);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(B0, led_state.scroll_lock);
-        writePin(B1, led_state.caps_lock);
-        writePin(B2, led_state.num_lock);
-    }
-    return true;
-}

keyboards/kb_elmo/aek2_usb/config.h

@@ -40,6 +40,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN B2
+#define LED_CAPS_LOCK_PIN B1
+#define LED_SCROLL_LOCK_PIN B0
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 

keyboards/kbdfans/kbdpad/mk1/config.h

@@ -33,6 +33,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN D0
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_BREATHING
 

keyboards/kbdfans/kbdpad/mk1/mk1.c

@@ -15,19 +15,3 @@
  */
 
 #include "mk1.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-    }
-    return true;
-}

keyboards/kinesis/kint2pp/config.h

@@ -26,6 +26,11 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN C5
+#define LED_CAPS_LOCK_PIN C1
+#define LED_SCROLL_LOCK_PIN C4
+#define LED_COMPOSE_PIN C3
+#define LED_PIN_ON_STATE 0
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/kinesis/kint2pp/kint2pp.c

@@ -1,26 +1 @@
 #include "kint2pp.h"
-
-void matrix_init_kb(void) {
-	led_init_ports();
-
-
-	matrix_init_user();
-}
-void led_init_ports() {
-  // * Set our LED pins as output
-  setPinOutput(C3); // Keypad LED
-  setPinOutput(C4); // ScrLock LED
-  setPinOutput(C5); // NumLock LED
-  setPinOutput(C1); // CapsLock LED
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        writePin(C3, !led_state.compose);
-        writePin(C4, !led_state.scroll_lock);
-        writePin(C5, !led_state.num_lock);
-        writePin(C1, !led_state.caps_lock);
-    }
-    return res;
-}

keyboards/kinesis/nguyenvietyen/config.h

@@ -25,3 +25,9 @@
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN D4
+#define LED_CAPS_LOCK_PIN E6
+#define LED_SCROLL_LOCK_PIN C6
+#define LED_COMPOSE_PIN D7
+#define LED_PIN_ON_STATE 0

keyboards/kinesis/nguyenvietyen/nguyenvietyen.c

@@ -1,31 +1 @@
 #include "nguyenvietyen.h"
-
-void matrix_init_kb(void) {
-    led_init_ports();
-    matrix_init_user();
-}
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    setPinOutput(D7);  // Keypad LED
-    setPinOutput(C6);  // ScrLock LED
-    setPinOutput(D4);  // NumLock LED
-    setPinOutput(E6);  // CapsLock LED
-
-    // turn all LEDs off by default
-    writePinHigh(D7);
-    writePinHigh(C6);
-    writePinHigh(D4);
-    writePinHigh(E6);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if (res) {
-        writePin(D7, !led_state.compose);
-        writePin(C6, !led_state.scroll_lock);
-        writePin(D4, !led_state.num_lock);
-        writePin(E6, !led_state.caps_lock);
-    }
-    return res;
-}

keyboards/kira80/config.h

@@ -38,6 +38,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_CAPS_LOCK_PIN D1
+#define LED_SCROLL_LOCK_PIN D6
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3

keyboards/kira80/kira80.c

@@ -15,21 +15,3 @@
  */
 
 #include "kira80.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-    setPinOutput(D6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-        writePin(D6, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/kona_classic/kona_classic.c

@@ -14,32 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "kona_classic.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    led_init_ports();
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_init_ports(void) {
-//    DDRB |= (1<<6) | (1<<7); // OUT
-}
-
-void led_set_kb(uint8_t usb_led) {
-//    led_set_user(usb_led);
-}

keyboards/mechlovin/adelais/adelais.c

@@ -15,30 +15,3 @@
  */
 
 #include "adelais.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B2);
-    writePinLow(B2);
-    setPinOutput(C15);
-    writePinLow(C15);
-    setPinOutput(B9);
-    writePinLow(B9);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B2, led_state.caps_lock);
-        writePin(B9, led_state.scroll_lock);
-        writePin(C15, led_state.num_lock);
-    }
-
-    return true;
-}

keyboards/mechlovin/adelais/config.h

@@ -30,3 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN C15
+#define LED_CAPS_LOCK_PIN B2
+#define LED_SCROLL_LOCK_PIN B9

keyboards/mechlovin/delphine/config.h

@@ -42,3 +42,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F7, D7, D6, D2 }
 
 #define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B5

keyboards/mechlovin/delphine/delphine.c

@@ -15,21 +15,3 @@
  */
 
 #include "delphine.h"
-
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B5);
-    writePinLow(B5);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B5, led_state.num_lock);
-    }
-
-    return true;
-}

keyboards/mechlovin/hannah65/config.h

@@ -41,6 +41,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B9
+
 #define BACKLIGHT_PIN B8
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_PWM_DRIVER PWMD3

keyboards/mechlovin/hannah65/hannah65.c

@@ -15,21 +15,3 @@
  */
 
 #include "hannah65.h"
-
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B9);
-    writePinLow(B9);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B9, led_state.caps_lock);
-    }
-
-    return true;
-}

keyboards/mechlovin/infinity87/config.h

@@ -45,6 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN A3
+#define LED_CAPS_LOCK_PIN A4
 
 #define BACKLIGHT_PIN B0
 #define BACKLIGHT_BREATHING

keyboards/mechlovin/infinity87/infinity87.c

@@ -15,24 +15,3 @@
  */
 
 #include "infinity87.h"
-
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(A3);
-    writePinLow(A3);
-    setPinOutput(A4);
-    writePinLow(A4);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(A4, led_state.caps_lock);
-        writePin(A3, led_state.num_lock);
-    }
-
-    return true;
-}

keyboards/mechlovin/infinity88/config.h

@@ -45,6 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN A3
+#define LED_CAPS_LOCK_PIN A4
 
 #define BACKLIGHT_PIN B0
 #define BACKLIGHT_BREATHING

keyboards/mechlovin/infinity88/infinity88.c

@@ -15,25 +15,3 @@
  */
 
 #include "infinity88.h"
-
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(A3);
-    writePinLow(A3);
-    setPinOutput(A4);
-    writePinLow(A4);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(A4, led_state.caps_lock);
-        writePin(A3, led_state.num_lock);
-    }
-
-    return true;
-}
-

keyboards/mechlovin/pisces/config.h

@@ -45,6 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B2
+
 #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3

keyboards/mechlovin/pisces/pisces.c

@@ -15,28 +15,3 @@
  */
 
 #include "pisces.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-    led_init_ports();
-}
-
-void led_init_ports(void) {
-    setPinOutput(B2);
-    writePinLow(B2);
-}
-
-bool led_update_kb(led_t led_state) {
-    if(led_update_user(led_state)) {
-        writePin(B2, led_state.caps_lock);
-    }
-
-    return true;
-}

keyboards/mehkee96/config.h

@@ -16,6 +16,10 @@
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/mehkee96/mehkee96.c

@@ -16,21 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mehkee96.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/nightly_boards/alter/rev1/config.h

@@ -44,6 +44,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN D7
+#define LED_CAPS_LOCK_PIN D6
+#define LED_SCROLL_LOCK_PIN B4
+
 // #define BACKLIGHT_PIN F1
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/nightly_boards/alter/rev1/rev1.c

@@ -15,23 +15,3 @@
  */
 
 #include "rev1.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D7);
-    setPinOutput(D6);
-    setPinOutput(B4);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D7, led_state.num_lock);
-        writePin(D6, led_state.caps_lock);
-        writePin(B4, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/panc60/config.h

@@ -37,6 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
+#define LED_CAPS_LOCK_PIN D1
+
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/panc60/panc60.c

@@ -15,19 +15,3 @@
  */
 
 #include "panc60.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}

keyboards/pandora/config.h

@@ -47,6 +47,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
 /* Encoder Function */
 #define ENCODERS_PAD_A { F6 }
 #define ENCODERS_PAD_B { F5 }

keyboards/pandora/pandora.c

@@ -15,21 +15,3 @@
  */
 
 #include "pandora.h"
-
-void matrix_init_kb(void) {
-    matrix_init_user();
-    led_init_ports();
-};
-
-void led_init_ports(void) {
-    setPinOutput(E6);
-    writePinHigh(E6);
-}
-
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        writePin(E6, !led_state.caps_lock);
-    }
-    return res;
-}

keyboards/pearl/config.h

@@ -25,6 +25,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MANUFACTURER Pearl Boards
 #define PRODUCT      Pearl
 
+#define LED_NUM_LOCK_PIN D0
+#define LED_CAPS_LOCK_PIN D1
+#define LED_SCROLL_LOCK_PIN D6
+
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
 

keyboards/pearl/pearl.c

@@ -16,23 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "pearl.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D6);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D0, led_state.num_lock);
-        writePin(D1, led_state.caps_lock);
-        writePin(D6, led_state.scroll_lock);
-    }
-    return true;
-}

keyboards/percent/canoe/canoe.c

@@ -16,19 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "canoe.h"
-
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
-}
-
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
-}