101 lines
3.0 KiB
Rust
101 lines
3.0 KiB
Rust
//! This example runs on a STM32WL board, which has a builtin Semtech Sx1262 radio.
|
|
//! It demonstrates LORA P2P send functionality.
|
|
#![no_std]
|
|
#![no_main]
|
|
#![macro_use]
|
|
#![feature(type_alias_impl_trait, async_fn_in_trait)]
|
|
|
|
use defmt::info;
|
|
use embassy_executor::Spawner;
|
|
use embassy_lora::iv::{InterruptHandler, Stm32wlInterfaceVariant};
|
|
use embassy_stm32::bind_interrupts;
|
|
use embassy_stm32::gpio::{Level, Output, Pin, Speed};
|
|
use embassy_stm32::spi::Spi;
|
|
use embassy_time::Delay;
|
|
use lora_phy::mod_params::*;
|
|
use lora_phy::sx1261_2::SX1261_2;
|
|
use lora_phy::LoRa;
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
const LORA_FREQUENCY_IN_HZ: u32 = 903_900_000; // warning: set this appropriately for the region
|
|
|
|
bind_interrupts!(struct Irqs{
|
|
SUBGHZ_RADIO => InterruptHandler;
|
|
});
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(_spawner: Spawner) {
|
|
let mut config = embassy_stm32::Config::default();
|
|
config.rcc.mux = embassy_stm32::rcc::ClockSrc::HSE32;
|
|
let p = embassy_stm32::init(config);
|
|
|
|
let spi = Spi::new_subghz(p.SUBGHZSPI, p.DMA1_CH1, p.DMA1_CH2);
|
|
|
|
// Set CTRL1 and CTRL3 for high-power transmission, while CTRL2 acts as an RF switch between tx and rx
|
|
let _ctrl1 = Output::new(p.PC4.degrade(), Level::Low, Speed::High);
|
|
let ctrl2 = Output::new(p.PC5.degrade(), Level::High, Speed::High);
|
|
let _ctrl3 = Output::new(p.PC3.degrade(), Level::High, Speed::High);
|
|
let iv = Stm32wlInterfaceVariant::new(Irqs, None, Some(ctrl2)).unwrap();
|
|
|
|
let mut delay = Delay;
|
|
|
|
let mut lora = {
|
|
match LoRa::new(SX1261_2::new(BoardType::Stm32wlSx1262, spi, iv), false, &mut delay).await {
|
|
Ok(l) => l,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mdltn_params = {
|
|
match lora.create_modulation_params(
|
|
SpreadingFactor::_10,
|
|
Bandwidth::_250KHz,
|
|
CodingRate::_4_8,
|
|
LORA_FREQUENCY_IN_HZ,
|
|
) {
|
|
Ok(mp) => mp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
let mut tx_pkt_params = {
|
|
match lora.create_tx_packet_params(4, false, true, false, &mdltn_params) {
|
|
Ok(pp) => pp,
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
}
|
|
};
|
|
|
|
match lora.prepare_for_tx(&mdltn_params, 20, false).await {
|
|
Ok(()) => {}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
let buffer = [0x01u8, 0x02u8, 0x03u8];
|
|
match lora.tx(&mdltn_params, &mut tx_pkt_params, &buffer, 0xffffff).await {
|
|
Ok(()) => {
|
|
info!("TX DONE");
|
|
}
|
|
Err(err) => {
|
|
info!("Radio error = {}", err);
|
|
return;
|
|
}
|
|
};
|
|
|
|
match lora.sleep(&mut delay).await {
|
|
Ok(()) => info!("Sleep successful"),
|
|
Err(err) => info!("Sleep unsuccessful = {}", err),
|
|
}
|
|
}
|