66 lines
2.0 KiB
Rust
66 lines
2.0 KiB
Rust
//! PWM input example
|
|
//!
|
|
//! This program demonstrates how to capture the parameters of the input waveform (frequency, width and duty cycle)
|
|
//! Connect PB1 and PA6 with a 1k Ohm resistor or Connect PB1 and PA8 with a 1k Ohm resistor
|
|
//! to see the output.
|
|
//!
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
|
|
use defmt::*;
|
|
use embassy_executor::Spawner;
|
|
use embassy_stm32::gpio::{Level, Output, OutputType, Pull, Speed};
|
|
use embassy_stm32::time::khz;
|
|
use embassy_stm32::timer::pwm_input::PwmInput;
|
|
use embassy_stm32::timer::simple_pwm::{PwmPin, SimplePwm};
|
|
use embassy_stm32::timer::Channel;
|
|
use embassy_stm32::{bind_interrupts, peripherals, timer};
|
|
use embassy_time::Timer;
|
|
use {defmt_rtt as _, panic_probe as _};
|
|
|
|
// Connect PB1 and PA6 with a 1k Ohm resistor
|
|
#[embassy_executor::task]
|
|
async fn blinky(led: peripherals::PB1) {
|
|
let mut led = Output::new(led, Level::High, Speed::Low);
|
|
|
|
loop {
|
|
led.set_high();
|
|
Timer::after_millis(50).await;
|
|
|
|
led.set_low();
|
|
Timer::after_millis(50).await;
|
|
}
|
|
}
|
|
|
|
bind_interrupts!(struct Irqs {
|
|
TIM2 => timer::CaptureCompareInterruptHandler<peripherals::TIM2>;
|
|
});
|
|
|
|
#[embassy_executor::main]
|
|
async fn main(spawner: Spawner) {
|
|
let p = embassy_stm32::init(Default::default());
|
|
|
|
unwrap!(spawner.spawn(blinky(p.PB1)));
|
|
// Connect PA8 and PA6 with a 1k Ohm resistor
|
|
let ch1 = PwmPin::new_ch1(p.PA8, OutputType::PushPull);
|
|
let mut pwm = SimplePwm::new(p.TIM1, Some(ch1), None, None, None, khz(1), Default::default());
|
|
let max = pwm.get_max_duty();
|
|
pwm.set_duty(Channel::Ch1, max / 4);
|
|
pwm.enable(Channel::Ch1);
|
|
|
|
let mut pwm_input = PwmInput::new(p.TIM2, p.PA0, Pull::None, khz(1000));
|
|
pwm_input.enable();
|
|
|
|
loop {
|
|
Timer::after_millis(500).await;
|
|
let period = pwm_input.get_period_ticks();
|
|
let width = pwm_input.get_width_ticks();
|
|
let duty_cycle = pwm_input.get_duty_cycle();
|
|
info!(
|
|
"period ticks: {} width ticks: {} duty cycle: {}",
|
|
period, width, duty_cycle
|
|
);
|
|
}
|
|
}
|