#![no_std]
#![no_main]

use defmt::*;
use embassy_executor::Spawner;
use embassy_net::udp::{PacketMetadata, UdpSocket};
use embassy_net::{Ipv4Address, Ipv4Cidr, StackResources};
use embassy_stm32::eth::{Ethernet, GenericPhy, PacketQueue};
use embassy_stm32::peripherals::ETH;
use embassy_stm32::rng::Rng;
use embassy_stm32::{bind_interrupts, eth, peripherals, rng, Config};
use embassy_time::Timer;
use heapless::Vec;
use static_cell::StaticCell;
use {defmt_rtt as _, panic_probe as _};

bind_interrupts!(struct Irqs {
    ETH => eth::InterruptHandler;
    RNG => rng::InterruptHandler<peripherals::RNG>;
});

type Device = Ethernet<'static, ETH, GenericPhy>;

#[embassy_executor::task]
async fn net_task(mut runner: embassy_net::Runner<'static, Device>) -> ! {
    runner.run().await
}

#[embassy_executor::main]
async fn main(spawner: Spawner) -> ! {
    let mut config = Config::default();
    {
        use embassy_stm32::rcc::*;
        config.rcc.hsi = Some(HSIPrescaler::DIV1);
        config.rcc.csi = true;
        config.rcc.hsi48 = Some(Default::default()); // needed for RNG
        config.rcc.pll1 = Some(Pll {
            source: PllSource::HSI,
            prediv: PllPreDiv::DIV4,
            mul: PllMul::MUL50,
            divp: Some(PllDiv::DIV2),
            divq: None,
            divr: None,
        });
        config.rcc.sys = Sysclk::PLL1_P; // 400 Mhz
        config.rcc.ahb_pre = AHBPrescaler::DIV2; // 200 Mhz
        config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
        config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz
        config.rcc.apb4_pre = APBPrescaler::DIV2; // 100 Mhz
        config.rcc.apb5_pre = APBPrescaler::DIV2; // 100 Mhz
        config.rcc.voltage_scale = VoltageScale::HIGH;
    }
    let p = embassy_stm32::init(config);
    info!("Hello World!");

    // Generate random seed.
    let mut rng = Rng::new(p.RNG, Irqs);
    let mut seed = [0; 8];
    rng.fill_bytes(&mut seed);
    let seed = u64::from_le_bytes(seed);

    let mac_addr = [0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF];

    static PACKETS: StaticCell<PacketQueue<4, 4>> = StaticCell::new();
    let device = Ethernet::new(
        PACKETS.init(PacketQueue::<4, 4>::new()),
        p.ETH,
        Irqs,
        p.PB6,
        p.PA2,
        p.PG6,
        p.PA7,
        p.PG4,
        p.PG5,
        p.PG13,
        p.PG12,
        p.PG11,
        GenericPhy::new(0),
        mac_addr,
    );

    // Have to use UDP w/ static config to fit in internal flash
    // let config = embassy_net::Config::dhcpv4(Default::default());
    let config = embassy_net::Config::ipv4_static(embassy_net::StaticConfigV4 {
        address: Ipv4Cidr::new(Ipv4Address::new(10, 42, 0, 61), 24),
        dns_servers: Vec::new(),
        gateway: Some(Ipv4Address::new(10, 42, 0, 1)),
    });

    // Init network stack
    static RESOURCES: StaticCell<StackResources<3>> = StaticCell::new();
    let (stack, runner) = embassy_net::new(device, config, RESOURCES.init(StackResources::new()), seed);

    // Launch network task
    unwrap!(spawner.spawn(net_task(runner)));

    // Ensure DHCP configuration is up before trying connect
    //stack.wait_config_up().await;

    info!("Network task initialized");

    // Then we can use it!
    let mut rx_meta = [PacketMetadata::EMPTY; 16];
    let mut rx_buffer = [0; 1024];
    let mut tx_meta = [PacketMetadata::EMPTY; 16];
    let mut tx_buffer = [0; 1024];

    let remote_endpoint = (Ipv4Address::new(10, 42, 0, 1), 8000);
    let socket = UdpSocket::new(stack, &mut rx_meta, &mut rx_buffer, &mut tx_meta, &mut tx_buffer);
    loop {
        // You need to start a server on the host machine, for example: `nc -lu 8000`
        socket
            .send_to(b"Hello, world", remote_endpoint)
            .await
            .expect("Buffer sent");
        Timer::after_secs(1).await;
    }
}