STM32H5xx ADC (#3557)

* stm32: Update STM32 data source

* stm32h5: Add ADC example

examples/stm32h5/src/bin/adc.rs

@@ -0,0 +1,59 @@
+#![no_std]
+#![no_main]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_stm32::adc::{Adc, SampleTime};
+use embassy_stm32::Config;
+use embassy_time::Timer;
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let mut config = Config::default();
+    {
+        use embassy_stm32::rcc::*;
+        config.rcc.hsi = Some(HSIPrescaler::DIV1);
+        config.rcc.csi = true;
+        config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL25,
+            divp: Some(PllDiv::DIV2),
+            divq: Some(PllDiv::DIV4), // SPI1 cksel defaults to pll1_q
+            divr: None,
+        });
+        config.rcc.pll2 = Some(Pll {
+            source: PllSource::HSI,
+            prediv: PllPreDiv::DIV4,
+            mul: PllMul::MUL25,
+            divp: None,
+            divq: None,
+            divr: Some(PllDiv::DIV4), // 100mhz
+        });
+        config.rcc.sys = Sysclk::PLL1_P; // 200 Mhz
+        config.rcc.ahb_pre = AHBPrescaler::DIV1; // 200 Mhz
+        config.rcc.apb1_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb2_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.apb3_pre = APBPrescaler::DIV2; // 100 Mhz
+        config.rcc.voltage_scale = VoltageScale::Scale1;
+        config.rcc.mux.adcdacsel = mux::Adcdacsel::PLL2_R;
+    }
+    let mut p = embassy_stm32::init(config);
+
+    info!("Hello World!");
+
+    let mut adc = Adc::new(p.ADC1);
+
+    adc.set_sample_time(SampleTime::CYCLES24_5);
+
+    let mut vrefint_channel = adc.enable_vrefint();
+
+    loop {
+        let vrefint = adc.blocking_read(&mut vrefint_channel);
+        info!("vrefint: {}", vrefint);
+        let measured = adc.blocking_read(&mut p.PA0);
+        info!("measured: {}", measured);
+        Timer::after_millis(500).await;
+    }
+}