feat: Feature match udp sockets

fix: fixed compile proto-ipv4/v6 edge cases in the ping module

embassy-net/src/icmp.rs

@@ -1,8 +1,8 @@
 //! ICMP sockets.
 
-use core::future::poll_fn;
+use core::future::{poll_fn, Future};
 use core::mem;
-use core::task::Poll;
+use core::task::{Context, Poll};
 
 use smoltcp::iface::{Interface, SocketHandle};
 pub use smoltcp::phy::ChecksumCapabilities;
@@ -36,6 +36,8 @@ pub enum SendError {
     NoRoute,
     /// Socket not bound to an outgoing port.
     SocketNotBound,
+    /// There is not enough transmit buffer capacity to ever send this packet.
+    PacketTooLarge,
 }
 
 /// Error returned by [`IcmpSocket::recv_from`].
@@ -109,25 +111,61 @@ impl<'a> IcmpSocket<'a> {
         })
     }
 
-    /// Dequeue a packet received from a remote endpoint, copy the payload into the given slice,
+    /// Wait until the socket becomes readable.
-    /// and return the amount of octets copied as well as the `IpAddress`
     ///
-    /// **Note**: when the size of the provided buffer is smaller than the size of the payload,
+    /// A socket is readable when a packet has been received, or when there are queued packets in
-    /// the packet is dropped and a `RecvError::Truncated` error is returned.
+    /// the buffer.
-    pub async fn recv_from(&self, buf: &mut [u8]) -> Result<(usize, IpAddress), RecvError> {
+    pub fn wait_recv_ready(&self) -> impl Future<Output = ()> + '_ {
-        poll_fn(move |cx| {
+        poll_fn(move |cx| self.poll_recv_ready(cx))
-            self.with_mut(|s, _| match s.recv_slice(buf) {
+    }
-                Ok(x) => Poll::Ready(Ok(x)),
+
-                // No data ready
+    /// Wait until a datagram can be read.
-                Err(icmp::RecvError::Exhausted) => {
+    ///
-                    //s.register_recv_waker(cx.waker());
+    /// When no datagram is readable, this method will return `Poll::Pending` and
-                    cx.waker().wake_by_ref();
+    /// register the current task to be notified when a datagram is received.
-                    Poll::Pending
+    ///
-                }
+    /// When a datagram is received, this method will return `Poll::Ready`.
-                Err(icmp::RecvError::Truncated) => Poll::Ready(Err(RecvError::Truncated)),
+    pub fn poll_recv_ready(&self, cx: &mut Context<'_>) -> Poll<()> {
-            })
+        self.with_mut(|s, _| {
+            if s.can_recv() {
+                Poll::Ready(())
+            } else {
+                // socket buffer is empty wait until at least one byte has arrived
+                s.register_recv_waker(cx.waker());
+                Poll::Pending
+            }
+        })
+    }
+
+    /// Receive a datagram.
+    ///
+    /// This method will wait until a datagram is received.
+    ///
+    /// Returns the number of bytes received and the remote endpoint.
+    pub fn recv_from<'s>(
+        &'s self,
+        buf: &'s mut [u8],
+    ) -> impl Future<Output = Result<(usize, IpAddress), RecvError>> + 's {
+        poll_fn(|cx| self.poll_recv_from(buf, cx))
+    }
+
+    /// Receive a datagram.
+    ///
+    /// When no datagram is available, this method will return `Poll::Pending` and
+    /// register the current task to be notified when a datagram is received.
+    ///
+    /// When a datagram is received, this method will return `Poll::Ready` with the
+    /// number of bytes received and the remote endpoint.
+    pub fn poll_recv_from(&self, buf: &mut [u8], cx: &mut Context<'_>) -> Poll<Result<(usize, IpAddress), RecvError>> {
+        self.with_mut(|s, _| match s.recv_slice(buf) {
+            Ok((n, meta)) => Poll::Ready(Ok((n, meta))),
+            // No data ready
+            Err(icmp::RecvError::Truncated) => Poll::Ready(Err(RecvError::Truncated)),
+            Err(icmp::RecvError::Exhausted) => {
+                s.register_recv_waker(cx.waker());
+                Poll::Pending
+            }
         })
-        .await
     }
 
     /// Dequeue a packet received from a remote endpoint and calls the provided function with the
@@ -136,7 +174,7 @@ impl<'a> IcmpSocket<'a> {
     ///
     /// **Note**: when the size of the provided buffer is smaller than the size of the payload,
     /// the packet is dropped and a `RecvError::Truncated` error is returned.
-    pub async fn recv_with<F, R>(&self, f: F) -> Result<R, RecvError>
+    pub async fn recv_from_with<F, R>(&self, f: F) -> Result<R, RecvError>
     where
         F: FnOnce((&[u8], IpAddress)) -> R,
     {
@@ -154,16 +192,106 @@ impl<'a> IcmpSocket<'a> {
         .await
     }
 
-    /// Enqueue a packet to be sent to a given remote address, and fill it from a slice.
+    /// Wait until the socket becomes writable.
+    ///
+    /// A socket becomes writable when there is space in the buffer, from initial memory or after
+    /// dispatching datagrams on a full buffer.
+    pub fn wait_send_ready(&self) -> impl Future<Output = ()> + '_ {
+        poll_fn(|cx| self.poll_send_ready(cx))
+    }
+
+    /// Wait until a datagram can be sent.
+    ///
+    /// When no datagram can be sent (i.e. the buffer is full), this method will return
+    /// `Poll::Pending` and register the current task to be notified when
+    /// space is freed in the buffer after a datagram has been dispatched.
+    ///
+    /// When a datagram can be sent, this method will return `Poll::Ready`.
+    pub fn poll_send_ready(&self, cx: &mut Context<'_>) -> Poll<()> {
+        self.with_mut(|s, _| {
+            if s.can_send() {
+                Poll::Ready(())
+            } else {
+                // socket buffer is full wait until a datagram has been dispatched
+                s.register_send_waker(cx.waker());
+                Poll::Pending
+            }
+        })
+    }
+
+    /// Send a datagram to the specified remote endpoint.
+    ///
+    /// This method will wait until the datagram has been sent.
+    ///
+    /// If the socket's send buffer is too small to fit `buf`, this method will return `Err(SendError::PacketTooLarge)`
+    ///
+    /// When the remote endpoint is not reachable, this method will return `Err(SendError::NoRoute)`
     pub async fn send_to<T>(&self, buf: &[u8], remote_endpoint: T) -> Result<(), SendError>
     where
         T: Into<IpAddress>,
     {
+        let remote_endpoint: IpAddress = remote_endpoint.into();
+        poll_fn(move |cx| self.poll_send_to(buf, remote_endpoint, cx)).await
+    }
+
+    /// Send a datagram to the specified remote endpoint.
+    ///
+    /// When the datagram has been sent, this method will return `Poll::Ready(Ok())`.
+    ///
+    /// When the socket's send buffer is full, this method will return `Poll::Pending`
+    /// and register the current task to be notified when the buffer has space available.
+    ///
+    /// If the socket's send buffer is too small to fit `buf`, this method will return `Poll::Ready(Err(SendError::PacketTooLarge))`
+    ///
+    /// When the remote endpoint is not reachable, this method will return `Poll::Ready(Err(Error::NoRoute))`.
+    pub fn poll_send_to<T>(&self, buf: &[u8], remote_endpoint: T, cx: &mut Context<'_>) -> Poll<Result<(), SendError>>
+    where
+        T: Into<IpAddress>,
+    {
+        // Don't need to wake waker in `with_mut` if the buffer will never fit the icmp tx_buffer.
+        let send_capacity_too_small = self.with(|s, _| s.payload_send_capacity() < buf.len());
+        if send_capacity_too_small {
+            return Poll::Ready(Err(SendError::PacketTooLarge));
+        }
+
+        self.with_mut(|s, _| match s.send_slice(buf, remote_endpoint.into()) {
+            // Entire datagram has been sent
+            Ok(()) => Poll::Ready(Ok(())),
+            Err(icmp::SendError::BufferFull) => {
+                s.register_send_waker(cx.waker());
+                Poll::Pending
+            }
+            Err(icmp::SendError::Unaddressable) => {
+                // If no sender/outgoing port is specified, there is not really "no route"
+                if s.is_open() {
+                    Poll::Ready(Err(SendError::NoRoute))
+                } else {
+                    Poll::Ready(Err(SendError::SocketNotBound))
+                }
+            }
+        })
+    }
+
+    /// Enqueue a packet to be sent to a given remote address with a zero-copy function.
+    ///
+    /// This method will wait until the buffer can fit the requested size before
+    /// calling the function to fill its contents.
+    pub async fn send_to_with<T, F, R>(&mut self, size: usize, remote_endpoint: T, f: F) -> Result<R, SendError>
+    where
+        T: Into<IpAddress>,
+        F: FnOnce(&mut [u8]) -> R,
+    {
+        // Don't need to wake waker in `with_mut` if the buffer will never fit the icmp tx_buffer.
+        let send_capacity_too_small = self.with(|s, _| s.payload_send_capacity() < size);
+        if send_capacity_too_small {
+            return Err(SendError::PacketTooLarge);
+        }
+
+        let mut f = Some(f);
         let remote_endpoint = remote_endpoint.into();
         poll_fn(move |cx| {
-            self.with_mut(|s, _| match s.send_slice(buf, remote_endpoint) {
+            self.with_mut(|s, _| match s.send(size, remote_endpoint) {
-                // Entire datagram has been sent
+                Ok(buf) => Poll::Ready(Ok({ unwrap!(f.take())(buf) })),
-                Ok(()) => Poll::Ready(Ok(())),
                 Err(icmp::SendError::BufferFull) => {
                     s.register_send_waker(cx.waker());
                     Poll::Pending
@@ -174,28 +302,20 @@ impl<'a> IcmpSocket<'a> {
         .await
     }
 
-    /// Enqueue a packet to be sent to a given remote address with a zero-copy function.
+    /// Flush the socket.
     ///
-    /// This method will wait until the buffer can fit the requested size before
+    /// This method will wait until the socket is flushed.
-    /// calling the function to fill its contents.
+    pub fn flush(&mut self) -> impl Future<Output = ()> + '_ {
-    pub async fn send_to_with<T, F, R>(&self, size: usize, remote_endpoint: T, f: F) -> Result<R, SendError>
+        poll_fn(|cx| {
-    where
+            self.with_mut(|s, _| {
-        T: Into<IpAddress>,
+                if s.send_queue() == 0 {
-        F: FnOnce(&mut [u8]) -> R,
+                    Poll::Ready(())
-    {
+                } else {
-        let mut f = Some(f);
-        let remote_endpoint = remote_endpoint.into();
-        poll_fn(move |cx| {
-            self.with_mut(|s, _| match s.send(size, remote_endpoint) {
-                Ok(buf) => Poll::Ready(Ok(unwrap!(f.take())(buf))),
-                Err(icmp::SendError::BufferFull) => {
                     s.register_send_waker(cx.waker());
                     Poll::Pending
                 }
-                Err(icmp::SendError::Unaddressable) => Poll::Ready(Err(SendError::NoRoute)),
             })
         })
-        .await
     }
 
     /// Check whether the socket is open.
@@ -280,9 +400,15 @@ pub mod ping {
     //! };
     //! ```
 
-    use core::net::{IpAddr, Ipv6Addr};
+    use core::net::IpAddr;
+    #[cfg(feature = "proto-ipv6")]
+    use core::net::Ipv6Addr;
 
     use embassy_time::{Duration, Instant, Timer, WithTimeout};
+    #[cfg(feature = "proto-ipv6")]
+    use smoltcp::wire::IpAddress;
+    #[cfg(feature = "proto-ipv6")]
+    use smoltcp::wire::Ipv6Address;
 
     use super::*;
 
@@ -392,11 +518,11 @@ pub mod ping {
                 // make a single ping
                 // - shorts out errors
                 // - select the ip version
-                let ping_duration = match params.target().unwrap() {
+                let ping_duration = match params.target.unwrap() {
                     #[cfg(feature = "proto-ipv4")]
-                    IpAddr::V4(_) => self.single_ping_v4(params, seq_no).await?,
+                    IpAddress::Ipv4(_) => self.single_ping_v4(params, seq_no).await?,
                     #[cfg(feature = "proto-ipv6")]
-                    IpAddr::V6(_) => self.single_ping_v6(params, seq_no).await?,
+                    IpAddress::Ipv6(_) => self.single_ping_v6(params, seq_no).await?,
                 };
 
                 // safely add up the durations of each ping
@@ -478,7 +604,7 @@ pub mod ping {
 
             // Helper function to recieve and return the correct echo reply when it finds it
             async fn recv_pong(socket: &IcmpSocket<'_>, seq_no: u16) -> Result<(), PingError> {
-                while match socket.recv_with(|(buf, _)| filter_pong(buf, seq_no)).await {
+                while match socket.recv_from_with(|(buf, _)| filter_pong(buf, seq_no)).await {
                     Ok(b) => !b,
                     Err(e) => return Err(PingError::SocketRecvError(e)),
                 } {}
@@ -548,7 +674,7 @@ pub mod ping {
 
             // Helper function to recieve and return the correct echo reply when it finds it
             async fn recv_pong(socket: &IcmpSocket<'_>, seq_no: u16) -> Result<(), PingError> {
-                while match socket.recv_with(|(buf, _)| filter_pong(buf, seq_no)).await {
+                while match socket.recv_from_with(|(buf, _)| filter_pong(buf, seq_no)).await {
                     Ok(b) => !b,
                     Err(e) => return Err(PingError::SocketRecvError(e)),
                 } {}
@@ -581,9 +707,9 @@ pub mod ping {
     /// * `timeout` - The timeout duration before returning a [`PingError::DestinationHostUnreachable`] error.
     /// * `rate_limit` - The minimum time per echo request.
     pub struct PingParams<'a> {
-        target: Option<IpAddr>,
+        target: Option<IpAddress>,
         #[cfg(feature = "proto-ipv6")]
-        source: Option<Ipv6Addr>,
+        source: Option<Ipv6Address>,
         payload: &'a [u8],
         hop_limit: Option<u8>,
         count: u16,
@@ -610,7 +736,7 @@ pub mod ping {
         /// Creates a new instance of [`PingParams`] with the specified target IP address.
         pub fn new<T: Into<IpAddr>>(target: T) -> Self {
             Self {
-                target: Some(target.into()),
+                target: Some(PingParams::ip_addr_to_smoltcp(target)),
                 #[cfg(feature = "proto-ipv6")]
                 source: None,
                 payload: b"embassy-net",
@@ -621,21 +747,34 @@ pub mod ping {
             }
         }
 
+        fn ip_addr_to_smoltcp<T: Into<IpAddr>>(ip_addr: T) -> IpAddress {
+            match ip_addr.into() {
+                #[cfg(feature = "proto-ipv4")]
+                IpAddr::V4(v4) => IpAddress::Ipv4(v4),
+                #[cfg(not(feature = "proto-ipv4"))]
+                IpAddr::V4(_) => unreachable!(),
+                #[cfg(feature = "proto-ipv6")]
+                IpAddr::V6(v6) => IpAddress::Ipv6(v6),
+                #[cfg(not(feature = "proto-ipv6"))]
+                IpAddr::V6(_) => unreachable!(),
+            }
+        }
+
         /// Sets the target IP address for the ping.
         pub fn set_target<T: Into<IpAddr>>(&mut self, target: T) -> &mut Self {
-            self.target = Some(target.into());
+            self.target = Some(PingParams::ip_addr_to_smoltcp(target));
             self
         }
 
         /// Retrieves the target IP address for the ping.
         pub fn target(&self) -> Option<IpAddr> {
-            self.target
+            self.target.map(|t| t.into())
         }
 
         /// Sets the source IP address for the ping (IPv6 only).
         #[cfg(feature = "proto-ipv6")]
-        pub fn set_source(&mut self, source: Ipv6Addr) -> &mut Self {
+        pub fn set_source<T: Into<Ipv6Address>>(&mut self, source: T) -> &mut Self {
-            self.source = Some(source);
+            self.source = Some(source.into());
             self
         }