Add support for stm32u595/5a5 OTG_HS in client mode

examples/stm32u5/src/bin/usb_hs_serial.rs

@@ -0,0 +1,129 @@
+#![no_std]
+#![no_main]
+
+use defmt::{panic, *};
+use defmt_rtt as _; // global logger
+use embassy_executor::Spawner;
+use embassy_futures::join::join;
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{bind_interrupts, peripherals, usb, Config};
+use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
+use embassy_usb::driver::EndpointError;
+use embassy_usb::Builder;
+use panic_probe as _;
+
+bind_interrupts!(struct Irqs {
+    OTG_HS => usb::InterruptHandler<peripherals::USB_OTG_HS>;
+});
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    info!("Hello World!");
+
+    let mut config = Config::default();
+    {
+        use embassy_stm32::rcc::*;
+        use embassy_stm32::time::Hertz;
+        config.rcc.hse = Some(Hse {
+            freq: Hertz(16_000_000),
+            mode: HseMode::Oscillator,
+        });
+        config.rcc.pll1 = Some(Pll {
+            source: PllSource::HSE,
+            prediv: PllPreDiv::DIV2,   // HSE / 2 = 8MHz
+            mul: PllMul::MUL60,        // 8MHz * 60 = 480MHz
+            divr: Some(PllDiv::DIV3),  // 480MHz / 3 = 160MHz (sys_ck)
+            divq: Some(PllDiv::DIV10), // 480MHz / 10 = 48MHz (USB)
+            divp: Some(PllDiv::DIV15), // 480MHz / 15 = 32MHz (USBOTG)
+        });
+        config.rcc.mux.otghssel = mux::Otghssel::PLL1_P;
+        config.rcc.voltage_range = VoltageScale::RANGE1;
+        config.rcc.sys = Sysclk::PLL1_R;
+    }
+
+    let p = embassy_stm32::init(config);
+
+    // Create the driver, from the HAL.
+    let mut ep_out_buffer = [0u8; 256];
+    let mut config = embassy_stm32::usb::Config::default();
+    // Do not enable vbus_detection. This is a safe default that works in all boards.
+    // However, if your USB device is self-powered (can stay powered on if USB is unplugged), you need
+    // to enable vbus_detection to comply with the USB spec. If you enable it, the board
+    // has to support it or USB won't work at all. See docs on `vbus_detection` for details.
+    config.vbus_detection = false;
+    let driver = Driver::new_hs(p.USB_OTG_HS, Irqs, p.PA12, p.PA11, &mut ep_out_buffer, config);
+
+    // Create embassy-usb Config
+    let mut config = embassy_usb::Config::new(0xc0de, 0xcafe);
+    config.manufacturer = Some("Embassy");
+    config.product = Some("USB-serial example");
+    config.serial_number = Some("12345678");
+
+    // Required for windows compatibility.
+    // https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/kconfig/CONFIG_CDC_ACM_IAD.html#help
+    config.device_class = 0xEF;
+    config.device_sub_class = 0x02;
+    config.device_protocol = 0x01;
+    config.composite_with_iads = true;
+
+    // Create embassy-usb DeviceBuilder using the driver and config.
+    // It needs some buffers for building the descriptors.
+    let mut config_descriptor = [0; 256];
+    let mut bos_descriptor = [0; 256];
+    let mut control_buf = [0; 64];
+
+    let mut state = State::new();
+
+    let mut builder = Builder::new(
+        driver,
+        config,
+        &mut config_descriptor,
+        &mut bos_descriptor,
+        &mut [], // no msos descriptors
+        &mut control_buf,
+    );
+
+    // Create classes on the builder.
+    let mut class = CdcAcmClass::new(&mut builder, &mut state, 64);
+
+    // Build the builder.
+    let mut usb = builder.build();
+
+    // Run the USB device.
+    let usb_fut = usb.run();
+
+    // Do stuff with the class!
+    let echo_fut = async {
+        loop {
+            class.wait_connection().await;
+            info!("Connected");
+            let _ = echo(&mut class).await;
+            info!("Disconnected");
+        }
+    };
+
+    // Run everything concurrently.
+    // If we had made everything `'static` above instead, we could do this using separate tasks instead.
+    join(usb_fut, echo_fut).await;
+}
+
+struct Disconnected {}
+
+impl From<EndpointError> for Disconnected {
+    fn from(val: EndpointError) -> Self {
+        match val {
+            EndpointError::BufferOverflow => panic!("Buffer overflow"),
+            EndpointError::Disabled => Disconnected {},
+        }
+    }
+}
+
+async fn echo<'d, T: Instance + 'd>(class: &mut CdcAcmClass<'d, Driver<'d, T>>) -> Result<(), Disconnected> {
+    let mut buf = [0; 64];
+    loop {
+        let n = class.read_packet(&mut buf).await?;
+        let data = &buf[..n];
+        info!("data: {:x}", data);
+        class.write_packet(data).await?;
+    }
+}