fixed some issues

config.h

@@ -46,3 +46,25 @@
 #define USE_SERIAL
 #define SOFT_SERIAL_PIN D2
 #define MASTER_LEFT
+
+// Set the mouse settings to a comfortable speed/accuracy trade-off,
+// assuming a screen refresh rate of 60 Htz or higher
+// The default is 50. This makes the mouse ~3 times faster and more accurate
+#define MOUSEKEY_INTERVAL 16
+// The default is 20. Since we made the mouse about 3 times faster with the previous setting,
+// give it more time to accelerate to max speed to retain precise control over short distances.
+#define MOUSEKEY_TIME_TO_MAX 40
+// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive
+#define MOUSEKEY_DELAY 100
+// It makes sense to use the same delay for the mouseweel
+#define MOUSEKEY_WHEEL_DELAY 100
+// The default is 100
+#define MOUSEKEY_WHEEL_INTERVAL 50
+// The default is 40
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+
+// Pick good defaults for enabling homerow modifiers
+#define TAPPING_TERM 200
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define TAPPING_FORCE_HOLD

info.json

@@ -3,14 +3,6 @@
     "keyboard_name": "dasbob",
     "maintainer": "grooovebob",
     "bootloader": "atmel-dfu",
-    "features": {
-        "bootmagic": true,
-        "command": false,
-        "console": false,
-        "extrakey": true,
-        "mousekey": true,
-        "nkro": true
-    },
     "processor": "atmega32u4",
     "url": "",
     "usb": {

keymaps/config.h

@@ -0,0 +1,70 @@
+// Copyright 2022 grooovebob (@grooovebob)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+#define DIRECT_PINS { \
+    { D0, F5, D1, F4, D3 }, \
+    { B1, C6, F7, D4,  F6}, \
+    { B6, B2, E6, B3, D7 }, \
+    { F0, B5, B4, NO_PIN, NO_PIN } \
+}
+
+#define DIRECT_PINS_RIGHT {  \
+    { D3, F4, D1, F5, D0 }, \
+    { F6, D4, F7, C6, B1}, \
+    { D7, B3, E6, B2, B6 }, \
+    { B4, B5, F0, NO_PIN, NO_PIN } \
+}
+
+
+
+#define UNUSED_PINS
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+#define USE_SERIAL
+#define SOFT_SERIAL_PIN D2
+#define MASTER_LEFT
+
+// Set the mouse settings to a comfortable speed/accuracy trade-off,
+// assuming a screen refresh rate of 60 Htz or higher
+// The default is 50. This makes the mouse ~3 times faster and more accurate
+#define MOUSEKEY_INTERVAL 16
+// The default is 20. Since we made the mouse about 3 times faster with the previous setting,
+// give it more time to accelerate to max speed to retain precise control over short distances.
+#define MOUSEKEY_TIME_TO_MAX 40
+// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive
+#define MOUSEKEY_DELAY 100
+// It makes sense to use the same delay for the mouseweel
+#define MOUSEKEY_WHEEL_DELAY 100
+// The default is 100
+#define MOUSEKEY_WHEEL_INTERVAL 50
+// The default is 40
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+
+// Pick good defaults for enabling homerow modifiers
+#define TAPPING_TERM 200
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define TAPPING_FORCE_HOLD

keymaps/default/keymap.c

@@ -39,9 +39,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     [_RAISE] = LAYOUT_split_3x5_3(
-        KC_ESC,   KC_UP, XXXXXXX,  XXXXXXX, XXXXXXX,                      KC_NUM_LOCK, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_MINUS,
-        KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, KC_LGUI,                      XXXXXXX,  KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_PLUS,
-        KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_PSCR,                      KC_RALT, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_0,
-                        KC_TRNS,   KC_TRNS,  KC_TAB,                      KC_ENT, KC_TRNS, KC_TRNS
+        KC_ESC,   KC_UP, XXXXXXX,  XXXXXXX, XXXXXXX,                            KC_NUM_LOCK, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_MINUS,
+        KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, KC_LGUI,                            XXXXXXX,  KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_PLUS,
+        KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_PSCR,                            KC_RALT, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_0,
+                        KC_TRNS,   KC_TRNS,  KC_TAB,                            KC_ENT, KC_TRNS, KC_TRNS
     ),
 };

rules.mk

@@ -1,2 +1,20 @@
-# This file intentionally left blank
-SPLIT_KEYBOARD = yes
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+UNICODE_ENABLE = yes        # Unicode
+AUDIO_ENABLE = no           # Audio output
+SPLIT_KEYBOARD = yes        # Use shared split_common code