rename and add shonny

LailaTheElf/0.2.3.ini

@@ -1,12 +1,12 @@
 [vendor]
-repo_id = freenen
+repo_id = lailatheelf
 # Vendor name will be shown by the Config Wizard.
-name = FReenen
+name = LailaTheElf
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
 config_version = 0.2.3
-config_update_url = https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/FReenen/
+config_update_url = https://gitea.finnvanreenen.nl/LailaTheElf/3dprinter_profiles/raw/branch/main/LailaTheElf/
-changelog_url = https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/commits/branch/main
+changelog_url = https://gitea.finnvanreenen.nl/LailaTheElf/3dprinter_profiles/commits/branch/main
 
 
 ########################################################################
@@ -14,21 +14,31 @@ changelog_url = https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/commit
 ########################################################################
 
 [printer_model:pringles]
-name = FReenen Pringles
+name = LailaTheElf Pringles
 variants = 0.4
 technology = FFF
-family = FReenen
+family = lailatheelf
 bed_model = 
 bed_texture = 
 thumbnail = pringles.png
 default_materials = PLA @pringles
 
+[printer_model:shonny]
+name = MBC Shonny
+variants = 0.4
+technology = FFF
+family = lailatheelf
+bed_model = 
+bed_texture = 
+thumbnail = 
+default_materials = PLA @shonny
+
 
 ########################################################################
 ### Print Settings #####################################################
 ########################################################################
 
-[print:*pringles*]
+[print:*default*]
 # Layers and perimeters
 
 ## Layers and perimeters - Layer height
@@ -297,7 +307,9 @@ post_process =
 
 notes = 
 
-# Dependencies
+
+[print:*pringles*]
+inherits = *default*
 
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
@@ -341,12 +353,56 @@ top_infill_extrusion_width = 0.5
 
 
 
+[print:*shonny*]
+inherits = *default*
+
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_SHONNY.*/
+
+[print:0.10mm - nice @shonny]
+inherits = *shonny*
+layer_height = 0.1
+bottom_solid_layers = 4
+top_solid_layers = 6
+
+[print:0.20mm - default @shonny]
+inherits = *shonny*
+layer_height = 0.20
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.30mm - fast @shonny]
+inherits = *shonny*
+layer_height = 0.3
+bottom_solid_layers = 2
+top_solid_layers = 2
+
+[print:speed boat @shonny]
+inherits = *shonny*
+layer_height = 0.25
+bottom_solid_layers = 3
+top_solid_layers = 3
+perimeters = 2
+
+# extrution width
+external_perimeter_extrusion_width = 0.5
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.5
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+support_material_extrusion_width = 0.5
+top_infill_extrusion_width = 0.5
+
+
+
+
 
 ########################################################################
 ### Fillements #########################################################
 ########################################################################
 
-[filament:PLA @pringles]
+[filament:*PLA*]
 filament_colour = #DDDDDD
 filament_diameter = 1.75
 extrusion_multiplier = 1
@@ -378,7 +434,6 @@ overhang_fan_speed_2 = 0
 overhang_fan_speed_3 = 0
 
 fan_below_layer_time = 100
-slowdown_below_layer_time = 20
 min_print_speed = 15
 
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
@@ -391,7 +446,6 @@ filament_infill_max_speed = 0
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 15
 filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
@@ -427,14 +481,26 @@ filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = Generic
 filament_wipe = nil
-inherits = Generic PLA @ELEGOO
 start_filament_gcode = "; Filament gcode\n"
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
 compatible_prints = 
 compatible_prints_condition = 
 
 
+[filament:PLA @pringles]
+inherits = *PLA*
+compatible_printers_condition = printer_notes=~/.*PRINTER_PRINGELS.*/
+slowdown_below_layer_time = 30
+filament_max_volumetric_speed = 14
+
+
+
+[filament:PLA @shonny]
+inherits = *PLA*
+compatible_printers_condition = printer_notes=~/.*PRINTER_SHONNY.*/
+slowdown_below_layer_time = 20
+filament_max_volumetric_speed = 7
+
 
 
 ########################################################################
@@ -442,22 +508,12 @@ compatible_prints_condition =
 ########################################################################
 
 
-[printer:pringles]
+[printer:*printer*]
 inherits = 
-printer_vendor = FReenen
+printer_vendor = LailaTheElf
-printer_model = pringles
-printer_variant = 0.4
 printer_technology = FFF
 
-default_filament_profile = PLA @pringles
-default_print_profile = 0.20mm - default @pringles
-printer_settings_id = 
-
-# General
-
 ## General - Size and coordiantes
-bed_shape = 10x10,225x10,225x225,10x225
-max_print_height = 250
 z_offset = 0
 
 ## General - Capabilities
@@ -465,9 +521,6 @@ extruders_count = 1
 single_extruder_multi_material = 0
 
 ## General - Firmware
-gcode_flavor = klipper
-thumbnails_format = PNG
-thumbnails = 16x16, 220x124
 silent_mode = 0
 remaining_times = 0
 binary_gcode = 0
@@ -564,6 +617,40 @@ multimaterial_purging = 140
 parking_pos_retraction = 92
 extra_loading_move = -2
 
-# Notes
 
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FREENEN\nPRINTER_PRINGELS
+[printer:pringels]
+inherits = *printer*
+
+printer_model = pringles
+printer_variant = 0.4
+
+default_filament_profile = PLA @pringles
+default_print_profile = 0.20mm - default @pringles
+printer_settings_id = 
+
+gcode_flavor = klipper
+thumbnails_format = PNG
+thumbnails = 16x16, 220x124
+bed_shape = 10x10,225x10,225x225,10x225
+max_print_height = 250
+
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LAILATHEELF\nPRINTER_PRINGELS
+
+
+[printer:shonny]
+inherits = *printer*
+
+printer_model = shonny
+printer_variant = 0.4
+
+default_filament_profile = PLA @shonny
+default_print_profile = 0.20mm - default @shonny
+printer_settings_id = 
+
+gcode_flavor = reprapfirmware
+thumbnails_format = QOI
+thumbnails = 160x160
+bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
+max_print_height = 200
+
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LAILATHEELF\nPRINTER_SHONNY

LailaTheElf/index.idx

@@ -2,3 +2,4 @@ min_slic3r_version = 2.8.0
 0.2.2 minor fixes
 0.2.1 minor fixes
 0.2.0 update to vender profile
+0.2.3 add shonny

manifest.json

@@ -1,8 +1,8 @@
 {
-	"name": "FReenen",
+	"name": "LailaTheElf",
-	"description": "Printer profiles from Finley van Reenen (FReenen)",
+	"description": "Printer profiles from Laila van Reenen (LailaTheElf)",
 	"visibility": "",
-	"id": "freenen",
+	"id": "lailatheelf",
-	"url": "https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/vendor_indices.zip",
+	"url": "https://gitea.finnvanreenen.nl/LailaTheElf/3dprinter_profiles/raw/branch/main/vendor_indices.zip",
-	"offline_archive_url": "https://gitea.finnvanreenen.nl/FReenen/3dprinter_profiles/raw/branch/main/FReenen.zip"
+	"offline_archive_url": "https://gitea.finnvanreenen.nl/LailaTheElf/3dprinter_profiles/raw/branch/main/LailaTheElf.zip"
 }

zip.sh

@@ -1,14 +1,15 @@
 #!/bin/sh
 
-rm vendor_indices.zip FReenen.zip
+rm vendor_indices.zip LailaTheElf.zip
 
-cp FReenen/index.idx FReenen.idx
+cp LailaTheElf/index.idx LailaTheElf.idx
-zip vendor_indices.zip FReenen.idx
+zip vendor_indices.zip LailaTheElf.idx
-rm FReenen.idx
+rm LailaTheElf.idx
 
-zip FReenen.zip manifest.json FReenen/* vendor_indices.zip
+zip LailaTheElf.zip manifest.json LailaTheElf/* vendor_indices.zip
+rm vendor_indices.zip
 
-# cp vendor_indices/FReenen.idx FReenen/index.idx
+# cp vendor_indices/LailaTheElf.idx LailaTheElf/index.idx
-# zip FReenen_offline.zip FReenen/*
+# zip LailaTheElf_offline.zip LailaTheElf/*
-# rm FReenen/index.idx
+# rm LailaTheElf/index.idx
 # cd ..