cleanup code

src/MPPT.c

@@ -1,6 +1,7 @@
 #include <stdint.h>
 #include <ti/drivers/PWM.h>
 
+#include "debug.h"
 #include "global.h"
 #include "MPPT.h"
 #include "spi.h"
@@ -8,7 +9,7 @@
 #define PWM_MIN 0.001
 #define PWM_MAX 0.9
 
-uint8_t mppt_setpoint, mppt_setpointOverrite, mppt_vermogen;
+uint8_t mppt_setpoint = 0xff, mppt_setpointOverrite, mppt_vermogen;
 uint8_t *mppt_setpointP;
 
 PWM_Handle mppt_pwm;
@@ -42,11 +43,25 @@ void mppt_init(){
   params.periodValue = 10; // 100 kHz
   mppt_pwm = PWM_open(CONFIG_PWM_0, &params);
   if (mppt_pwm == NULL) {
-    while (1);
+    ERROR("faild to open PWM");
+    return;
   }
 
   mppt_setpointP = &mppt_setpoint;
   mppt_start();
+
+  // whit until it recevs a valid setpoint
+  while(mppt_setpoint > 250)
+    usleep(1e3);
+
+  // Update status
+  if(Status == INIT){
+    Status = MPPT_READY;
+  }else if(Status == NOODSTOP_READY){
+    Status = ALL_READY;
+  }else{
+    ERROR("invalid Status");
+  }
 }
 
 void mppt_setPWM(double d){
@@ -134,6 +149,7 @@ void mppt_start(){
 }
 
 void mppt_deinit(){
+  mppt_setpoint = 0xff;
   mppt_setPWM(0);
   PWM_stop(mppt_pwm);
 }

src/communicatie.c

@@ -33,7 +33,7 @@ void comm_init(){
   SPI_Params_init(&SPI_MSPTrans.params);
   SPI_MSPTrans.interface = CONFIG_SPI_MASTER;
   SPI_MSPTrans.cs = CONFIG_GPIO_CSMSP;
-  SPI_ADC.params.frameFormat = SPI_POL0_PHA0; // mode 0
+  SPI_MSPTrans.params.frameFormat = SPI_POL0_PHA0; // mode 0
   SPI_MSPTrans.params.bitRate = 1E6; // 1 MHz
   SPI_MSPTrans.trans.count = SPI_PACKET_LENGTH;
   SPI_MSPTrans.trans.txBuf = &TransmitBuffer[0];
@@ -86,3 +86,5 @@ void comm_init(){
     usleep(SPI_INTERVAL);
   }
 }
+
+//TODO: add uart code

src/debug.h

@@ -1,11 +1,11 @@
 #ifndef DEBUG_H
 #define DEBUG_H
 
-#define LOG(msg) ;
+#define LOG(msg, ...) ;
 
-#define ERROR(msg) LOG("ERROR: " msg)
+#define ERROR(msg, ...) LOG("ERROR: " msg, ##__VA_ARGS__)
-#define WARN(msg)  LOG("WARN: " msg)
+#define WARN(msg, ...)  LOG("WARN: " msg, ##__VA_ARGS__)
-#define DEBUG(msg) LOG("DEBUG: " msg)
+#define DEBUG(msg, ...) LOG("DEBUG: " msg, ##__VA_ARGS__)
-#define INFO(msg)  LOG("INFO: " msg)
+#define INFO(msg, ...)  LOG("INFO: " msg, ##__VA_ARGS__)
 
 #endif

src/global.h

@@ -4,7 +4,7 @@
 #include <pthread.h>
 #include "ti_drivers_config.h"
 
-typedef enum {
+typedef enum Status_t {
   SLEEP,
   INIT,
   MPPT_READY,

src/main.c

@@ -51,12 +51,12 @@ void startSys(){
   treads.noodstop = createSimplePTread(4, &noodstop_start);
 }
 void stopSys(){
+  //TODO: communication say what the reason for the emergency stop was if thare was one
   // pthread_exit(treads.comm);
   pthread_exit(treads.noodstop);
   pthread_exit(treads.mppt);
 
   treads.mppt = createSimplePTread(1, &mppt_deinit);
-  treads.noodstop = createSimplePTread(3, &noodstop_deinit);
 }
 
 void initISR(){
@@ -83,6 +83,7 @@ void startSysISR(){
 void * mainTask(void *arg){
   Status_t lastState;
   while(1){
+    INFO("system state changed from %s to %s", lastState, Status);
     switch (Status){
       case SLEEP:
         stopSys();
@@ -90,6 +91,9 @@ void * mainTask(void *arg){
       case INIT:
         startInit();
         break;
+      case ALL_READY:
+        //TODO: say the system is ready
+        break;
       case WORKING:
         startSys();
         break;
@@ -112,5 +116,5 @@ int main(void){
   treads.sysBeheer = createSimplePTread(1, mainTask);
   BIOS_start(); // start the BIOS
   while(1)
-    usleep(1E6);
+    sleep(10);
 }

src/noodstop.c

@@ -107,7 +107,7 @@ void noodstop_init(){
       && nood_maxwaardes.maxTempratuur >= 60 && nood_maxwaardes.maxTempratuur <= 120
       && nood_maxwaardes.maxVermogen <= 250
     ){
-      break; // stop the loop values are valid
+      break; // stop the loop, values are valid
     }
     usleep(100E3);
   }
@@ -123,11 +123,5 @@ void noodstop_init(){
 }
 
 void noodstop_start(){
-  // start the treath voor het uitlezen van de temptatuur
+  noodstop_tempratuurHandle();
-  adcThread = createSimplePTread(2, &noodstop_tempratuurHandle);
-}
-
-void noodstop_deinit(){
-  // stop threads
-  pthread_exit(adcThread);
 }

src/noodstop.h

@@ -10,7 +10,6 @@ void noodstop_snelhied(uint16_t snelhied);
 
 void noodstop_init();
 void noodstop_start();
-void noodstop_deinit();
 
 uint8_t noodstop_getTempratuur();
 void noodstop_activeerNoodstop();

src/spi.c

@@ -4,6 +4,7 @@
 #include "debug.h"
 
 
+SPI_Trans_t SPI_ADC;
 uint8_t ADC_TxBuf[4];
 uint8_t ADC_RxBuf[4];
 
@@ -13,7 +14,7 @@ void SPI_Init(){
   // init ADC
   SPI_Params_init(&SPI_ADC.params);
   SPI_ADC.interface = CONFIG_SPI_MASTER;
-  SPI_ADC.cs = CONFIG_GPIO_CSMSP;
+  SPI_ADC.cs = CONFIG_GPIO_CSADC;
   SPI_ADC.params.frameFormat = SPI_POL0_PHA0; // mode 0
   SPI_ADC.params.bitRate = 1E6; // 1 MHz
   SPI_ADC.trans.count = 4;
@@ -40,7 +41,7 @@ int SPI_trans(SPI_Trans_t *trans){
   SPI_Handaler = &spih;
 
   // open spi connection with paramaters of this one
-  spih = SPI_open(CONFIG_SPI_MASTER, &trans->params);
+  spih = SPI_open(trans->interface, &trans->params);
   if (spih == NULL) {
     ERROR("initialising SPI for communicating with the MSP\n");
     return 1;

src/spi.h

@@ -29,8 +29,6 @@ typedef struct SPI_Trans_t {
 } SPI_Trans_t;
 SPI_Handle *SPI_Handaler;
 
-SPI_Trans_t SPI_ADC;
-
 void SPI_Init();
 uint16_t ADC_read(uint8_t ch);
 int SPI_trans(SPI_Trans_t *trans);

src/systeemBeheer.c

@@ -1,4 +0,0 @@
-
-void systeemBeheer(){
-  
-}