/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --board "/ti/boards/CC3220S_LAUNCHXL" --product "simplelink_cc32xx_sdk@4_20_00_07"
 * @versions {"data":"2020052512","timestamp":"2020052512","tool":"1.5.0+1397","templates":"2020052512"}
 */

/**
 * Import the modules used in this configuration.
 */
const DriverLib      = scripting.addModule("/ti/devices/DriverLib");
const Board          = scripting.addModule("/ti/drivers/Board");
const DMA            = scripting.addModule("/ti/drivers/DMA");
const GPIO           = scripting.addModule("/ti/drivers/GPIO", {}, false);
const GPIO1          = GPIO.addInstance();
const I2C            = scripting.addModule("/ti/drivers/I2C", {}, false);
const I2C1           = I2C.addInstance();
const PWM            = scripting.addModule("/ti/drivers/PWM", {}, false);
const PWM1           = PWM.addInstance();
const Power          = scripting.addModule("/ti/drivers/Power");
const SPI            = scripting.addModule("/ti/drivers/SPI");
const SPI1           = SPI.addInstance();
const Watchdog       = scripting.addModule("/ti/drivers/Watchdog");
const Watchdog1      = Watchdog.addInstance();
const SimpleLinkWifi = scripting.addModule("/ti/drivers/net/wifi/SimpleLinkWifi");
const SlNet          = scripting.addModule("/ti/net/SlNet");
const SlNet1         = SlNet.addInstance();

/**
 * Write custom configuration values to the imported modules.
 */
GPIO1.$name     = "CONFIG_LED_R";
GPIO1.$hardware = system.deviceData.board.components.LED_RED;

I2C1.$hardware = system.deviceData.board.components.LP_I2C;
I2C1.$name     = "CONFIG_I2C";

PWM1.$name                = "CONFIG_PWM_0";
PWM1.timer.pwmPin.$assign = "boosterpack.13";

Power.ioRetentionShutdown = ["GRP_1"];
Power.parkPins.$name      = "ti_drivers_power_PowerCC32XXPins0";

SPI1.$name                    = "CONFIG_SPI_0";
SPI1.mode                     = "Four Pin SS Active Low";
SPI1.defaultTxBufferValue     = "0";
SPI1.spi.$assign              = "SPI0";
SPI1.spi.sclkPin.$assign      = "boosterpack.7";
SPI1.spi.misoPin.$assign      = "boosterpack.14";
SPI1.spi.mosiPin.$assign      = "boosterpack.15";
SPI1.spi.ssPin.$assign        = "boosterpack.18";
SPI1.spi.dmaRxChannel.$assign = "UDMA_CH6";
SPI1.spi.dmaTxChannel.$assign = "UDMA_CH7";

Watchdog1.$name            = "CONFIG_WATCHDOG_0";
Watchdog1.watchdog.$assign = "WATCHDOG0";

SlNet1.$name  = "CONFIG_SLNET";
SlNet1.ifName = "CC32xx";

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
GPIO1.gpioPin.$suggestSolution   = "boosterpack.29";
I2C1.i2c.$suggestSolution        = "I2C0";
I2C1.i2c.sdaPin.$suggestSolution = "boosterpack.10";
I2C1.i2c.sclPin.$suggestSolution = "boosterpack.9";
PWM1.timer.$suggestSolution      = "Timer1";