make file structure

.gitignore

@@ -3,6 +3,16 @@
 # Learn more about .gitignore:
 #     https://www.atlassian.com/git/tutorials/saving-changes/gitignore
 
+# ccs artifact files
+/.settings
+/targetConfigs
+/.ccs*
+/.cproject
+/.project
+*.cmd
+/*.c
+/*.h
+
 # Node artifact files
 node_modules/
 dist/

README.md

@@ -1,45 +1,3 @@
-**Edit a file, create a new file, and clone from Bitbucket in under 2 minutes**
+# Eindopdracht EMS20 - Groep 5
 
-When you're done, you can delete the content in this README and update the file with details for others getting started with your repository.
+Dit is een project opgegeven door Hoogeschool Rotterdam voor de opleiding elektrotechniek en gemaakt door Bram Bleij en Mats van Reenen.
-
-*We recommend that you open this README in another tab as you perform the tasks below. You can [watch our video](https://youtu.be/0ocf7u76WSo) for a full demo of all the steps in this tutorial. Open the video in a new tab to avoid leaving Bitbucket.*
-
----
-
-## Edit a file
-
-You’ll start by editing this README file to learn how to edit a file in Bitbucket.
-
-1. Click **Source** on the left side.
-2. Click the README.md link from the list of files.
-3. Click the **Edit** button.
-4. Delete the following text: *Delete this line to make a change to the README from Bitbucket.*
-5. After making your change, click **Commit** and then **Commit** again in the dialog. The commit page will open and you’ll see the change you just made.
-6. Go back to the **Source** page.
-
----
-
-## Create a file
-
-Next, you’ll add a new file to this repository.
-
-1. Click the **New file** button at the top of the **Source** page.
-2. Give the file a filename of **contributors.txt**.
-3. Enter your name in the empty file space.
-4. Click **Commit** and then **Commit** again in the dialog.
-5. Go back to the **Source** page.
-
-Before you move on, go ahead and explore the repository. You've already seen the **Source** page, but check out the **Commits**, **Branches**, and **Settings** pages.
-
----
-
-## Clone a repository
-
-Use these steps to clone from SourceTree, our client for using the repository command-line free. Cloning allows you to work on your files locally. If you don't yet have SourceTree, [download and install first](https://www.sourcetreeapp.com/). If you prefer to clone from the command line, see [Clone a repository](https://confluence.atlassian.com/x/4whODQ).
-
-1. You’ll see the clone button under the **Source** heading. Click that button.
-2. Now click **Check out in SourceTree**. You may need to create a SourceTree account or log in.
-3. When you see the **Clone New** dialog in SourceTree, update the destination path and name if you’d like to and then click **Clone**.
-4. Open the directory you just created to see your repository’s files.
-
-Now that you're more familiar with your Bitbucket repository, go ahead and add a new file locally. You can [push your change back to Bitbucket with SourceTree](https://confluence.atlassian.com/x/iqyBMg), or you can [add, commit,](https://confluence.atlassian.com/x/8QhODQ) and [push from the command line](https://confluence.atlassian.com/x/NQ0zDQ).

common.syscfg

@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2018-2019, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+// @cliArgs --board /ti/boards/CC3220S_LAUNCHXL
+
+/*
+ *  common.syscfg
+ */
+
+var SimpleLinkWifi = scripting.addModule("/ti/drivers/net/wifi/SimpleLinkWifi");
+var Crypto = scripting.addModule("/ti/drivers/Crypto");
+var Crypto1 = Crypto.addInstance();
+var Power = scripting.addModule("/ti/drivers/Power");
+var Board = scripting.addModule("/ti/drivers/Board");
+var DriverLib = scripting.addModule("/ti/devices/DriverLib");
+var Display = scripting.addModule("/ti/display/Display");
+var Display1 = Display.addInstance();
+var DMA = scripting.addModule("/ti/drivers/DMA");
+var GPIO = scripting.addModule("/ti/drivers/GPIO");
+var GPIO1 = GPIO.addInstance();
+var GPIO2 = GPIO.addInstance();
+var GPIO3 = GPIO.addInstance();
+var GPIO4 = GPIO.addInstance();
+var GPIO5 = GPIO.addInstance();
+var GPIO6 = GPIO.addInstance();
+var GPIO7 = GPIO.addInstance();
+var GPIO8 = GPIO.addInstance();
+var SPI = scripting.addModule("/ti/drivers/SPI");
+var SPI1 = SPI.addInstance();
+var Timer = scripting.addModule("/ti/drivers/Timer");
+var Timer1 = Timer.addInstance();
+var Timer2 = Timer.addInstance();
+var Timer3 = Timer.addInstance();
+var Watchdog = scripting.addModule("/ti/drivers/Watchdog");
+var Watchdog1 = Watchdog.addInstance();
+var SlNet = scripting.addModule("/ti/net/SlNet");
+var SlNet1 = SlNet.addInstance();
+// Name - The C/C++ identifier used in applications as the index parameter passed to Crypto runtime APIs
+Crypto1.$name = "CONFIG_Crypto_0";
+// IO Retention Shutdown - IO groups to be retained during Shutdown
+Power.ioRetentionShutdown = ["GRP_1"];
+// Name
+Power.parkPins.$name = "ti_drivers_power_PowerCC32XXPins0";
+// Name - The C/C++ identifier used in applications as the index parameter passed to Display runtime APIs
+Display1.$name = "CONFIG_Display_0";
+// Use Hardware - Select the hardware to use, or 'None' to use available header pins
+Display1.$hardware = system.deviceData.board.components.XDS110UART;
+// Name - The C/C++ identifier used in applications as the index parameter passed to UART runtime APIs
+Display1.uart.$name = "CONFIG_UART_0";
+// Use DMA
+Display1.uart.useDMA = true;
+// Name
+Display1.uart.uart.$name = "MyUART1";
+// Use Peripheral
+Display1.uart.uart.$assign = "UART0";
+// Assign pin
+Display1.uart.uart.txPin.$assign = "GP01"; // pin number - 55
+// Assign pin
+Display1.uart.uart.rxPin.$assign = "GP02"; // pin number - 57
+// Assign pin
+Display1.uart.uart.txDmaChannel.$assign = "UDMA_CH9";
+// Assign pin
+Display1.uart.uart.rxDmaChannel.$assign = "UDMA_CH8";
+// Use Hardware - Select the hardware to use, or 'None' to use available header pins
+GPIO1.$hardware = system.deviceData.board.components.SW2;
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO1.$name = "CONFIG_GPIO_BUTTON_0";
+// Assign pin
+GPIO1.gpioPin.$assign = "boosterpack.3"; // P04
+// Use Hardware - Select the hardware to use, or 'None' to use available header pins
+GPIO2.$hardware = system.deviceData.board.components.SW3;
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO2.$name = "CONFIG_GPIO_BUTTON_1";
+// Assign pin
+GPIO2.gpioPin.$assign = "boosterpack.11"; // P15
+// Use Hardware - Select the hardware to use, or 'None' to use available header pins
+GPIO3.$hardware = system.deviceData.board.components.LED0;
+// Output Strength - Specifies the output strength
+GPIO3.outputStrength = "High";
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO3.$name = "CONFIG_GPIO_LED_0";
+// Use Hardware - Select the hardware to use, or 'None' to use available header pins
+GPIO4.$hardware = system.deviceData.board.components.LED2;
+// Output Strength - Specifies the output strength
+GPIO4.outputStrength = "High";
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO4.$name = "CONFIG_GPIO_LED_1";
+// Use Hardware - Select the hardware to use, or 'None' to use available header pins
+GPIO5.$hardware = system.deviceData.board.components.LED1;
+// Output Strength - Specifies the output strength
+GPIO5.outputStrength = "High";
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO5.$name = "CONFIG_GPIO_LED_2";
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO6.$name = "CONFIG_GPIO_0";
+// Mode - Select the GPIO mode
+GPIO6.mode = "Dynamic";
+// Assign pin
+GPIO6.gpioPin.$assign = "boosterpack.19"; // P18
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO7.$name = "CONFIG_GPIO_1";
+// Mode - Select the GPIO mode
+GPIO7.mode = "Dynamic";
+// Assign pin
+GPIO7.gpioPin.$assign = "boosterpack.2"; // P58*
+// Name - The C/C++ identifier used in applications as the index parameter passed to GPIO runtime APIs
+GPIO8.$name = "CONFIG_GPIO_2";
+// Mode - Select the GPIO mode
+GPIO8.mode = "Dynamic";
+// Assign pin
+GPIO8.gpioPin.$assign = "boosterpack.4"; // P03
+// Name - The C/C++ identifier used in applications as the index parameter passed to SPI runtime APIs
+SPI1.$name = "CONFIG_SPI_0";
+// Mode - In three pin mode the SS signal is not used.
+SPI1.mode = "Four Pin SS Active Low";
+// Default TX Buffer Value - Specifies the default transmit buffer value.
+SPI1.defaultTxBufferValue = "0";
+// Name
+SPI1.spi.$name = "MySPI1";
+// Use Peripheral
+SPI1.spi.$assign = "SPI0";
+// Assign pin
+SPI1.spi.sclkPin.$assign = "boosterpack.7"; // P05
+// Assign pin
+SPI1.spi.misoPin.$assign = "boosterpack.14"; // P06
+// Assign pin
+SPI1.spi.mosiPin.$assign = "boosterpack.15"; // P07
+// Assign pin
+SPI1.spi.ssPin.$assign = "boosterpack.18"; // P08
+// Assign pin
+SPI1.spi.dmaRxChannel.$assign = "UDMA_CH6";
+// Assign pin
+SPI1.spi.dmaTxChannel.$assign = "UDMA_CH7";
+// Name - The C/C++ identifier used in applications as the index parameter passed to Timer runtime APIs
+Timer1.$name = "CONFIG_TIMER_0";
+// Timer Type
+Timer1.timerType = "32 Bits";
+// Name
+Timer1.timer.$name = "MyTimer1";
+// Use Peripheral
+Timer1.timer.$assign = "Timer0";
+// Name - The C/C++ identifier used in applications as the index parameter passed to Timer runtime APIs
+Timer2.$name = "CONFIG_TIMER_1";
+// Name
+Timer2.timer.$name = "MyTimer1";
+// Use Peripheral
+Timer2.timer.$assign = "Timer1";
+// Name - The C/C++ identifier used in applications as the index parameter passed to Timer runtime APIs
+Timer3.$name = "CONFIG_TIMER_2";
+// Name
+Timer3.timer.$name = "MyTimer1";
+// Use Peripheral
+Timer3.timer.$assign = "Timer1";
+// Name - The C/C++ identifier used in applications as the index parameter passed to Watchdog runtime APIs
+Watchdog1.$name = "CONFIG_WATCHDOG_0";
+// Name
+Watchdog1.watchdog.$name = "MyWATCHDOG1";
+// Use Peripheral
+Watchdog1.watchdog.$assign = "WATCHDOG0";
+// Name
+SlNet1.$name = "CONFIG_SLNET";
+// Interface Name - Specifies the name for this interface"
+SlNet1.ifName = "CC32xx";
+// Suggest solution
+GPIO3.gpioPin.$suggestSolution = "64";
+// Suggest solution
+GPIO4.gpioPin.$suggestSolution = "1";
+// Suggest solution
+GPIO5.gpioPin.$suggestSolution = "2";

src/header.h

@@ -0,0 +1,4 @@
+
+void * GSensorTask(void *args);
+void * MQTTTask(void *args);
+void * SocketTask(void *args);

src/main.c

@@ -0,0 +1,36 @@
+#include <stdint.h>
+#include <pthread.h>
+#include <ti/sysbios/BIOS.h>
+#include <ti/drivers/GPIO.h>
+#include "ti_drivers_config.h"
+
+#include "./header.h"
+
+void Hardware_init(){
+  Board_init();
+  GPIO_init();
+}
+
+int main(void){
+  Hardware_init() // initilize hardware
+
+  // ==============================================
+  // === tread for G sensor =======================
+  // ==============================================
+
+
+
+
+  BIOS_start();
+
+  return (0);
+}
+
+/*
+ *  ======== dummyOutput ========
+ *  Dummy SysMin output function needed for benchmarks and size comparison
+ *  of FreeRTOS and TI-RTOS solutions.
+ */
+void dummyOutput(void)
+{
+}